Fitted my Gtec 1 this afternoon and found i have rolling road 2 mins drive from my house! The place is called MotorWorx, they were a nice bunch and although not experienced with coupes they seem very knowledgeable with high performance cars.
My car is completely standard apart from the Gtec. They said it's running a little on the lean side but not enough to worry about. Also the boost is all over the place, something i was aware of, i've already cleaned the ebv but i think it's time for a new one, either that or possibly a dump valve problem. Well here are the graphs.

34BHP up from standard, not bad at all! I'd get yourself to Flea's to get the fuelling spot-on and perhaps even an extra 10-15 Gee-gee's to boot!

Saving up for a flea map, got a big list i'm slowly ticking off!

nice results but get that boost under control, 1.5bar will not be doing your engine any favours

Boom!!!

Thought it was an optomistic reading for a standard car with gtec1!

1.5 bar. Dear lord!

You will not last long with it spiking like that...