20VT engine mount........

Guys,
I'm struggling to find a new, preferably original RH engine mount, the one on the alloy bracket that holds the A/c compressor, alternator, PAS pump and idler wheel for the aux belt.
The original part no° is 46464666

I've found a replacement but it's £20 postage and I don't know what the quality is like https://www.xbredylab.com/index.php?main_page=product_info&products_id=108915

Does anyone know where I can get one or a good quality replacement.

Thanks in advance
Rob

Not original but I’ve got one of these fitted

https://strongflexuk.com/product/061920b-engine-mount-fiat-coupe-turbo-r5-220ps/

Easy to fit, probably out last the car as well

Thanks Adam,

How is it? Is it harsh or not noticeable due to it being stiffer than the original.....

Thanks

I’ve not actually noticed due to the fact the original one was in such a poor state so I have no real point of reference

I may be paranoid here but I’m sure the engine became a little more ‘whiney’ since having it fitted. I removed both aux belts and the noise remained, even did the cambelt and water pump but the whine remained so can only assume it was the mount

Humm
OK thanks for that.
May have to look another sort unless anyone else has any input
Cheers

So has anyone else got any suggestions or recommendations of where to get a new mount from?

Cheers

Hi Rob, Tanc Barratt of Ludlow sourced one for me several years ago and i have bought quite a few items for the 16 vt and 20vt`s over the years from him, he can be contacted on 01299 266355. There is also the Vibra Technics alternative who offer the complete set.

Thank you for your reply.
Will contact him and see what he says.