since I have spare engine, I always wanted to build 2.4L conversion. I read that crankshaft from Stilo Abarth is needed, I have one. How what piston and rods I need? If I understand correctly I need special design for these. I know that Italian company CPS has pistons for Stilo Abarth turbo, I don't know if they can fit. What about rods, does anyone has drawings? thanks
Re: 2.4 pistons and rods
[Re: ]
#1019583 14/04/201008:5114/04/201008:51
CPS pistons only can be used with a high block, like the Stilo or Kappa 2,4l block. You will need shorter pistons to fit in 2l block from Fiat Coupe. Only available short pistons are the CP Pistons from USA. You can get them from Johns. 2,4l conrods can be ordered form Johns as well (sells good Cunningham). I also have seen forged rods for 2,4l in Ebay from Cufaro-racing.com for a real cheap price (I think it was ~600Euro) - worth a request... If interested - I still have a set of used CP pistons for 2,4l and standard bore. Juergen
20VT coupegrale 4x4
Re: 2.4 pistons and rods
[Re: Stichl]
#1019801 14/04/201014:0914/04/201014:09