I hope that someone can help me with MAF sensor voltages.
I have an initial rough idle and no acceleration after about 3000 rpm with misfire.
I suspect the MAF as the injectors are new and I think that the coil packs are OK (all of the spark plugs are the same colour; slight green tint on the tip, but black soot around the screw base, so running hot and overfuling I think).
My MAF is reading 0.18 V with no airflow, and around 0.8 V at idle. Are those readings correct? Information that I've found on-line tells me these should be 1 V and 2.5 V respectively.
Thanks for any advice!