Life of one 95´ Broom yellow 2.0 16V NA

Fiat Coupe Club UK

Fiat Coupe Forum

» Announced
Posting images

» Related sites
Main club site
fiatcoupe.net

Top Posters(All Time)

barnacle 33,794

stan 32,123

Theresa 23,343

PeteP 22,171

bockers 21,083

JimO 17,919

Nigel 17,385

Print Thread

Page 2 of 2

Re: Life of one 95´ Broom yellow 2.0 16V NA [Re: Honza] #1670633 12/03/2024 09:09 12/03/2024 09:09
Joined: Feb 2006 Posts: 221 Czech republic Honza OP Making a profit
Honza OP Making a profit Joined: Feb 2006 Posts: 221 Czech republic	Yesterday I cut stock IM and tried to fit plates where the TB (these are being already machined) will be bolted and flange where velocity stacks together with plenum will be bolted. Some minor porting will be needed to open the intake to 45mm and match the gasket between IM and head Attached Files 430866439_10211464943975354_1103641288920003611_n (1).jpg (61 downloads) 430788514_10211464943335338_9190295915945158087_n.jpg (61 downloads) 430816198_10211464944575369_480238714075883053_n.jpg (61 downloads) IMG_20240312_160036_714.jpg (47 downloads) Last edited by Honza; 12/03/2024 19:37. 20 years with yellow 2.0 16v NA 22 years with black SEDICIVALVOLE

Re: Life of one 95´ Broom yellow 2.0 16V NA [Re: Honza] #1673374 20/08/2024 07:20 20/08/2024 07:20
Joined: Feb 2006 Posts: 221 Czech republic Honza OP Making a profit
Honza OP Making a profit Joined: Feb 2006 Posts: 221 Czech republic	So.. Intake manifold almost finished.. 3D printed plenum, ITBs bolted to modified stock first part of intake eich was ported Attached Files IMG_20240817_154140_801.jpg (31 downloads) IMG_20240817_154132_696.jpg (31 downloads) Messenger_creation_7f69b225-10a8-4f8d-9ff7-1f7344e6dd14.jpeg (31 downloads) Messenger_creation_f3415210-de82-4d4f-b76f-3be4268704cb.jpeg (31 downloads) 20 years with yellow 2.0 16v NA 22 years with black SEDICIVALVOLE

Page 2 of 2