what about theese 17" on my coupe

mfcoop

I am sure those are Momos - though can't remember the model. They do look good - don't what fitmewnt they are, and whether they need wobblies etc.

there fox3 evos and straight fit

On the 20vt??? are you sure?

see the avitars mine is 16v and enfant is 20v no mention of turbo are they diff stud offset then

Same as Circolo Ive just had 18' Dare V5's fitted (Actually made by Eta Beta). Exact fit. No spacers, No wobbly bolts. Not even rubbing and still get full steering lock.

Pic here .

I don't know about you there, but in my country the 18" tyres are 2x more expensive than 17"s!!!

Just as reference:

4 x Eagle gsd3 F1 215/40x17 = 700€
4 x Eagle gsd3 F1 215/35x18 = 1300€!!!

How so many of you go to 18" wheels??? it's just a matter of looks because IMO the 17"s are even more confortable and I don't think that performance will be so much different between the 2

ally they are lush, where did you get them?

Decided to update this thread as so many new members are asking about wheels. If you have anymore to add on here then let me know please.

All these wheels are listed to fit the 20VT with Brembo Calipers. Members with NA or 16V/16VT will have a greater choice as wont have clearance problems

What we have so far is:

PCD 98

17" Compomotive Mo's
17" Azev C,E,U and LS
17" Team Dynamics Pro Race 1.2 ET25
17" Ronal Lz
17" Ronal R38 = Courtesy of Nelson
17" Ronal R39
17" Ronal R42

18" Azev C,E,M,U,FS and LS
18" Azev C
18" Azev E
18" Dare V5


PCD 100 Wobbly bolts required

17" Dare V1
18" Wolfrace Urban Racers = Courtesy of Mark
18" TSW Ribs = Courtesy of Clark

PCD 100 Wobbly bolts and spacers

18" Kosei Titanium Racers
18" Wolfrace Twin-Blade ET35 3mm Spacers = Courtesy Of Hamster
18" OZ Superleggera 7mm Spacers

I must state that all these wheels I am listing are collectively from Forum members. I am purely doing this as a guide for fellow forum members.
I therefore can not be held responsible for any wrong info.

One of our members here has the Oxigin Toxics, and they are apparently a straight fit on a 16vt. They may need spacers for the 20vt however

Graham,

You can add:

Et27 98pcd (No spacers; no wobbly bolts)

Ronal Lz 17"
Ronal R38 17"
Ronal R39 17"
Ronal R42 17"



The list is growing

As the list is now growing I would like to add to this a link next to each one showing a Coupe with that particular wheel in that size. Please pm with your pics along with the link

cheers

great list! is this sticky yet?

Gumball

A sticky???

What is your wheels?

oh.OK. Hardly think this thread is that important though

I think it could or can be

There are inumerous mates searching for aftermarket wheels on the forum.

I think is just a matter of a forum moderator evaluate the importance of this topic though.

I agree - making this sticky would be excellent. I remember how hard it was to find the right wheels for my 20vt, and only some extensive searching, calling and visting different wheel and tyre places was I able to go for the ones I have now (Dare v5's).

Making this sticky, would help a lot of people, and hopefully reduce the number of "which wheels will fit my Coupe?" type questions.

Need pics please to add to the thread

Ok so PCD should be 98, but what is the actual correct offset?

Also what size tyres are people running on 17s / 18s?

The correct offset depends on spoke wheels design but nevertheless it has to be low.

Somewhat near 30. Best if it's lower because it will provide more space to clear the brembos.

The correct size tyre in a 17" wheel will be 205/45 (this giving a marginaly wider gear final ratio - the speedo will read more speed than actualy's running)

Or the 215/40 (this giving a marginaly tighter gear final ratio - the speedo will read a little less speed than actualy's running)

Of course any speedo has it's own margin of error. The coops are somewhat near 10km/h thus reading 260 when you are really running at 250kms/h)

I can only send the ronal R38 that I've photographed a couple of days ago.

I don't have any more 20vt wheel pics.

I'll PM you Graham with the pics.

Cheers

Right got my first pic attached to the thread. Thanks Mark.
18" Urban Racers.

Who else wants their Coupe on show?

Please send me a pm with a link

cheers

You have PM Graham

i've got the the tsw ribs 18"

@ Graham - no probs mate - glad to help getting the ball rolling!

Adding pictures of Coupes with each wheel attached.If you have any of the ones listed below please pm with a link. Preferably showing a nice side on view

All these wheels are listed to fit the 20VT with Brembo Calipers. Members with NA or 16V/16VT will have a greater choice as wont have clearance problems

What we have so far is:

PCD 98

17" Compomotive Mo's = begbie
17" Azev C = mattB
17" Azev E
17" Azev U
17" Azev LS
17" Team Dynamics Pro Race 1.2 ET25
17" Ronal LZ
17" Ronal R38 = nelson
17" Ronal R39
17" Ronal R42

18" Azev C
18" Azev E
18" Azev M = Bambam
18" Azev U
18" Azev FS
18" Azev LS
18" Dare V5 = allystew

PCD 100 Wobbly bolts required

17" Dare V1
18" Wolfrace Urban Racers = mburns
18" TSW Ribs = Clark
18" MAK Sting ET35 = JAX

PCD 100 Wobbly bolts and spacers

18" Kosei Titanium Racers
18" Wolfrace Twin-Blade ET35 3mm Spacers = Hamster
18" OZ Superleggera 7mm Spacers

I must state that all these wheels I am listing are collectively from Forum members. I am purely doing this as a guide for fellow forum members.
I therefore can not be held responsible for any wrong info.

Fox racing i'll post a pic up soon.