ulez for 20v VIS

Does any one known the ULEZ emissions for the 20 valve VIS ?

Fiat Coupe is only Euro 2 standard, Euro 4 is the min ULEZ std

Thanks for reply

Does any got eec certificate of Conformity for fiat 20vt6 normally document when car is new
Or nox for 20vt6

According to the AA website, emissions limits that apply to ULEZ are as follows, with values reported on on the Certificato di Confirmita CEE which I have for my 20vt Plus shown in bold afterwards

Euro 4 emission limits (petrol)
CO – 1.0 g/km 1.337
HC – 0.10 g/km not given
NOx – 0.08 g/km not given
PM – no limit not given

So it fails on CO, but before you get your hopes up on NOx, the total HC+NOx is given as 0.383 vs. the limit of 0.18

The Fiat Coupe is only Euro 2 compliant at best

Limit is 0.08
The fiat coupe vt6 must be near that limit
I have to wait up to 3 months as I asked fiat for a certificate of Conformity

Yes 0.08 for NOx but figure is not given on CEE, only HC + NOx for which limit is 0.10 + 0.08 = 0.18.

If your CEE is the same as mine, it will not give a figure for NOx so that 3 month wait may be for nothing...

Unfortunately the CoC will not give you that breakdown between NOx and HC figures. The requirement to do so only came in on the Euro 3 standard. Euro 1 and 2 lumped the HC and NOx in together, Coupes being Euro 2 vehicles I doubt you will ever find the info short of getting it tested yourself (which no doubt they would accept even if it met the standard!!)

Emissions for the VIS does anyone know what they are or
have a certificate of conformity (CoC) for
The VIS

Regards