Clips and other plastic parts

does anyone know where to find replacements for:

The round black plastic insert in the rear axel.

The small black clips for the door seals.

The small black clips for the rear wheel lining.


Thanks, Jaap

OE part numbers are as follows
7724029
46401659 (I think, a screw, correct?)
7569468

If you Google those numbers you can find sellers (in Italy) for the first and last clips, but the screw looks to be more tricky to find...

7724029
Found it on the net, not sure if i can get it delivered to The Netherlands.
Until now I have been looking at general webshops since it's just a plug for a tube, but have not found the correct size so far.

46401659 (I think, a screw, correct?)
No, it's a plug. But don't have one outside the car now for a picture. Perhaps it's 60711097
http://eper.fiatforum.com/eper/navi...ER_CAT=SP&WINDOW_ID=1&GUI_LANG=3

7569468
Found it on a website! But for Wholesale only.

It would be great if FCCUK organized a buy for members who are willing to invest money in all kinds of smaller perishable parts. E.g. the top strut mounting is hard to get, Febi can produce them but the order size has to be 500.
For years I am collecting all kinds of parts, with a value in stock higher than a coupe itself. But it's the only way to keep coupes on the road the next decades. The Coupe enthousiast in The Netherlands who organized these kinds of remanufacture has quit unfortunately.

For the insert on the rear axle, you can get plastic blanking plugs from Ebay.

Can you give us a clue how to find them?

Just search "Plastic Blanking Plugs".
70mm diameter is the one you want. Should cost you less than 2 quid for the pair

Got it, thanks!

My blanking plugs for the rear axle arrived, and after some griding they fit very perfectly. I just have to buy some more Coupe's to be able to use them all …

https://nl.aliexpress.com/item/32356529069.html?spm=a2g0o.cart.0.0.35863c00phU0du&mp=1

I use these if you want to sell your spares pm me

From left to right:
Original
Unmodified
Modified (due to thickness of the pipe grind away parts of the ridges)

in situ

Yes the ridges make them abit tight to fit but i just hammered them in with a mallet without grinding them off

Perhaps the caps as a replacement for the yearly fccuk membership window-stickers?
With nice round fccuk sticker on it.