Fiat Coupe Club UK

19" Alloys?

Posted By: Anonymous

19" Alloys? - 19/10/2006 16:38

Anyone else on here got 19's?
Just seeing if they can give me any advise, with lowering,
I.E taking out the arch liners/Rolling arches?

CHEERS
Posted By: Flea

Re: 19" Alloys? - 19/10/2006 16:41

Markus runs 19s
Posted By: Anonymous

Re: 19" Alloys? - 19/10/2006 17:17

Cheers FLEA!
WIll go and find him!
Posted By: Anonymous

Re: 19" Alloys? - 19/10/2006 17:26

I have 19's, lowered 35mm, no archwork required
Posted By: Markus

Re: 19" Alloys? - 19/10/2006 19:32

have a look here

19" Kahns
Posted By: Anonymous

Re: 19" Alloys? - 19/10/2006 19:37

I like them a lot one thing i've always felt with the coupe is that the standard size 16's don't fill the arches a tall & actually look quite small compared to the size of the actual car.

I guess that the way round that is to get rid of the 16's & go bigger.
Posted By: Anonymous

Re: 19" Alloys? - 20/10/2006 06:24

markus, i am suprised you get away with 235/35/19's, any rubbing?
Posted By: Markus

Re: 19" Alloys? - 20/10/2006 14:38

not really.....im actually running 18" bbs lm wheels now.....the front tyres are 235/40/18 and the rears are 265/35/18....this combination of tyres and wheels actusally has slightly larger diameter than the 19s....there is very little rubbing on full lock....
Posted By: Per

Re: 19" Alloys? - 20/10/2006 14:42

..yeah since 225/35-18 are a LOT smaller..
Posted By: Anonymous

Re: 19" Alloys? - 20/10/2006 14:56

My tyres are 215/35/19
© 2024 Fiat Coupe Club UK