Fiat Coupe Club UK
Show us your alloys!!!!
Posted By: Anonymous
Show us your alloys!!!! - 02/12/2006 21:27
Want to see what after market alloys people have,
ive got tsw Reflex on mine,
http://i7.photobucket.com/albums/y300/mettey21/FIATCOUPE005.jpg
Posted By: Anonymous
Re: Show us your alloys!!!! - 02/12/2006 21:31
Posted By: Anonymous
Re: Show us your alloys!!!! - 02/12/2006 21:34
reflex again
http://img.photobucket.com/albums/v295/frary1755.freeserve.co.uk/15.jpgfancy tsw naming wheels after a duran duran song
its "show us your motors" all over again
Posted By: Anonymous
Re: Show us your alloys!!!! - 02/12/2006 21:35
Quote:
reflex again
http://img.photobucket.com/albums/v295/frary1755.freeserve.co.uk/15.jpg
fancy tsw naming wheels after a duran duran song
Yeh!!! lol
what size are yours?
Posted By: Anonymous
Re: Show us your alloys!!!! - 02/12/2006 21:37
Quote:
Quote:
reflex again
http://img.photobucket.com/albums/v295/frary1755.freeserve.co.uk/15.jpg
fancy tsw naming wheels after a duran duran song
Yeh!!! lol
what size are yours?
thats a rather personal question....17huge inches
Posted By: Anonymous
Re: Show us your alloys!!!! - 02/12/2006 21:40
same, as mine, but the last owner was very poor at parking and as a result , they have seen better days, so im on the hunt for some new ones!
Posted By: Anonymous
Re: Show us your alloys!!!! - 02/12/2006 21:44
Steal frarys
Not recommended - stealing is not good.
Improving your inches and going to 18s highly recommended - buying mine is good!
Posted By: Anonymous
Re: Show us your alloys!!!! - 02/12/2006 22:20
Oh dear I've just been hassling Mark20v about his alloys earlier today to find out his already put them on this thread with all the answers.
18" Mania racing brooklyns do look the part on the coupe :-)
Posted By: Anonymous
Re: Show us your alloys!!!! - 02/12/2006 22:36
lol - no worries...
dont mind being hassled with 'real cash money'
Posted By: Anonymous
Re: Show us your alloys!!!! - 02/12/2006 22:55
if those mania s had fit a 20vt id of had em off ya
Posted By: Anonymous
Re: Show us your alloys!!!! - 02/12/2006 22:57
Posted By: Anonymous
Re: Show us your alloys!!!! - 02/12/2006 23:05
My
Momo GTR's, 20mm spacers needed to get
this close fit
Posted By: Anonymous
Re: Show us your alloys!!!! - 02/12/2006 23:24
I think with the necessary spacers (20mm maybe) they should fit - seems lots of 20vts have alloys fitted with these spacers in order to clear the calipers.
Maybe someone who has used them could confirm...
Posted By: Anonymous
Re: Show us your alloys!!!! - 02/12/2006 23:27
Posted By: Jimbo
Re: Show us your alloys!!!! - 03/12/2006 05:18
Lenso Evo II 18" 4 x 98mm fit with a 10mm spacer on the front.
Clickerty Click
Posted By: Anonymous
Re: Show us your alloys!!!! - 03/12/2006 05:29
Like them a lot!!
Posted By: Anonymous
Re: Show us your alloys!!!! - 03/12/2006 17:17
That rear/pas side shot of your car looks stunning!
Posted By: bridges
Re: Show us your alloys!!!! - 04/12/2006 01:17
Posted By: Anonymous
Re: Show us your alloys!!!! - 04/12/2006 01:47
Got the ones in my sig.... if needed can post link to larger pic!
Ross
Posted By: DavidL
Re: Show us your alloys!!!! - 04/12/2006 08:01
Posted By: Anonymous
Re: Show us your alloys!!!! - 04/12/2006 08:20
Quote:
Lenso Evo II 18" 4 x 98mm fit with a 10mm spacer on the front.
Clickerty
Click
your car looks soooooo much better on standard wheels jimbo
really
Posted By: Jimbo
Re: Show us your alloys!!!! - 04/12/2006 12:11
Each to their own Craig, I like it and thats what counts.
I have never liked the tiny little 16" wheels on the coupe, they look far too small.
True story.
Posted By: Anonymous
Re: Show us your alloys!!!! - 04/12/2006 13:40
Clicky fox rs II 7x18 wheels
Posted By: Jimbo
Re: Show us your alloys!!!! - 04/12/2006 14:48
Chris your link doesn't work. Tried to sort it but its still not working
Posted By: Begbie
Re: Show us your alloys!!!! - 05/12/2006 00:09
Posted By: Anonymous
Re: Show us your alloys!!!! - 05/12/2006 00:19
Quote:
Hopeless Jimbo
17" Compomotive Mo's
very impressed with how the compomotives look on the coupe! what about brake clearance? are you still running 16v Turbo brakes?
Iain
Posted By: Anonymous
Re: Show us your alloys!!!! - 05/12/2006 00:23
nope
he's running brembo's
and jimbo
i didn't say i didn't like your new wheels
because i do like them
just prefare your car on standards
Posted By: Begbie
Re: Show us your alloys!!!! - 05/12/2006 00:56
As our ginger / auburn friend said above, i am running 4 pot brembo's and it clears the calipers with ease. Partially the reason why i got them, but also a direct 4 x 98pcd and 35mm offset
Posted By: Anonymous
Re: Show us your alloys!!!! - 05/12/2006 01:07
Quote:
As our auburn friend said above, i am running 4 pot brembo's and it clears the calipers with ease. Partially the reason why i got them, but also a direct 4 x 98pcd and 35mm offset
Posted By: Anonymous
Re: Show us your alloys!!!! - 05/12/2006 01:07
Posted By: Anonymous
Re: Show us your alloys!!!! - 05/12/2006 01:38
Quote:
Clicky
fox rs II 7x18 wheels
i think that your wheels are the nicest ive seen in this thread mate!!! they suit the car the most.
Posted By: Anonymous
Re: Show us your alloys!!!! - 05/12/2006 03:47
Quote:
Quote:
Forgot the brand, but look ok to me
carbon bonnet hhmmm
exactly what i was thinking!
Posted By: Begbie
Re: Show us your alloys!!!! - 05/12/2006 04:34
Quote:
Quote:
As our auburn friend said above, i am running 4 pot brembo's and it clears the calipers with ease. Partially the reason why i got them, but also a direct 4 x 98pcd and 35mm offset
Craig, i have shown my girfriend the pictures of you and she says ginger, she should know, she is a hair dresser. Jess says hairdressers only say auburn to make you feel better, like when they say you have no grey hair, but you really do, so it's ginger all the way, if your not careful your subtitle could be changed
Posted By: Anonymous
Re: Show us your alloys!!!! - 05/12/2006 04:39
hahaha
it was the dulux colour match man who said it was auburn sunset
show her
this picture and see what she says
Posted By: Mariusz
Re: Show us your alloys!!!! - 05/12/2006 05:01
Posted By: DavidL
Re: Show us your alloys!!!! - 05/12/2006 15:13
Well, it's not completely carbon, it's partially glass fiber and then covered with real carbon fiber + lamination.
Weight's only about 1/2 the OE item. costed me around 850 quid all in all (bonnet+carbon fiber processing).
Posted By: Anonymous
Re: Show us your alloys!!!! - 05/12/2006 20:00
Posted By: Anonymous
Re: Show us your alloys!!!! - 05/12/2006 20:06
Technomagnesio Monaco's 16" bigger pic Would swap for standard 20vt alloys though!
Posted By: Anonymous
Re: Show us your alloys!!!! - 05/12/2006 22:52
They're not completely dissimilar to mine! Keep 'em on - they look great!
Posted By: Anonymous
Re: Show us your alloys!!!! - 05/12/2006 23:06
Not Aftermarket (But I gotta state old skool baby old skool)
LOL
Just picked these up from the local garage and had em sprayed up to the same as the LE wheel colour.
http://i53.photobucket.com/albums/g46/abarthroo/Coupe/MySummerRimms1.jpghttp://i53.photobucket.com/albums/g46/abarthroo/Coupe/MySummerRimms2.jpghttp://i53.photobucket.com/albums/g46/abarthroo/Coupe/MySummerRimms3.jpgAlways wanted a set so they will be the summer rimms, LE's for the winter tyres.
Jimbo I am suprised (I thought you were "Classic" look ??
R00
Posted By: Anonymous
Re: Show us your alloys!!!! - 06/12/2006 06:16
old skool baby yeah!
Posted By: Anonymous
Re: Show us your alloys!!!! - 06/12/2006 23:48
Posted By: Anonymous
Re: Show us your alloys!!!! - 07/12/2006 21:33
can you still buy dare v5's? i cant find em anywhere!
Posted By: Anonymous
Re: Show us your alloys!!!! - 07/12/2006 22:03
Hmmm.
Doesn't look like they are made anymore, as my source for Dare v5's (topgear) don't stock them anymore. Maybe if someone has some old stock you might be lucky.
Posted By: OO7
Re: Show us your alloys!!!! - 07/12/2006 23:19
What wheels dose rog20vt have, they are
.
Posted By: Anonymous
Re: Show us your alloys!!!! - 07/12/2006 23:42
i got mine about 3 mounths ago. carnt remember where from tho
they cost me in total £890 and they were shiped over from Italy
Posted By: Anonymous
Re: Show us your alloys!!!! - 09/12/2006 00:41
18" Elite Blade...Ruff as fcuk ride though!
UpcloseWheel Side
Posted By: Anonymous
Re: Show us your alloys!!!! - 26/02/2007 16:02
Ferrari Badges????? hmmmmmm......
Posted By: Baby_Cash
Re: Show us your alloys!!!! - 26/02/2007 18:47
Posted By: Anonymous
Re: Show us your alloys!!!! - 27/02/2007 01:11
Posted By: Anonymous
Re: Show us your alloys!!!! - 27/02/2007 03:17
Posted By: bilbo
Re: Show us your alloys!!!! - 27/02/2007 03:48
Posted By: Anonymous
Re: Show us your alloys!!!! - 27/02/2007 04:10
You guys, I'm feeling inadequate now with my standard 16's
Posted By: Anonymous
Re: Show us your alloys!!!! - 27/02/2007 04:26
Nowt wrong with the standard 16's!
Posted By: Anonymous
Re: Show us your alloys!!!! - 02/03/2007 15:45
Excuse the state off the car its just been to Wales and back, now i'm very ill so have'nt been able to clean it
There Mille Miglia EVO 5 17"
http://img.photobucket.com/albums/v57/adyr5/DSC00152.jpgIt is usually clean honestly
http://img.photobucket.com/albums/v57/adyr5/r1.jpg
Posted By: Anonymous
Re: Show us your alloys!!!! - 03/03/2007 22:01
Doesn't anyone buy Azev A or C's anymore? This is my old coupe with them on:
http://www.showoffyourcar.com/cars/FIAT/3094.JPGNow I'm rejoining the fold I may go the same route (yes it's too high, but the new car is already lowered
)
Posted By: Anonymous
Re: Show us your alloys!!!! - 04/03/2007 00:07
clicky on my page below,
i think these babies look great
Posted By: Anonymous
Re: Show us your alloys!!!! - 04/03/2007 00:11
Wicked wheels and car - nice. Not sure the wheels would suit a coupe though - would need to see them on.
Posted By: Anonymous
Re: Show us your alloys!!!! - 04/03/2007 00:23
imo they would look great on a coupe,
there a Aei japaneese lightweight wheel.
Just out of interest did you sell that sprintey coupe on this forum to turbotob as it looks identical to his..
Posted By: Anonymous
Re: Show us your alloys!!!! - 04/03/2007 01:20
The guy I sold it to, sold it on ages ago so maybe it is.
So what are the wheels again, where do you buy them and how much?? I'm torn between Azev Cs and being more adventurous.
Posted By: Anonymous
Re: Show us your alloys!!!! - 04/03/2007 01:30
Theres a place called Performance wheels which is in Bardon industrial estate..
i paid 600 quid all inc.....
g g g g great as tony would say.
i went to manchester and london looking for some rims that would clear the brembos and above all look good.
Posted By: Anonymous
Re: Show us your alloys!!!! - 04/03/2007 07:49
they look great,what size are the wheels johnny? they look like dare v5s
Posted By: Anonymous
Re: Show us your alloys!!!! - 09/03/2007 15:33
Posted By: Jimbo
Re: Show us your alloys!!!! - 09/03/2007 17:44
Your links dont work
Posted By: Anonymous
Re: Show us your alloys!!!! - 09/03/2007 18:01
Just saw they are moving the server and it will be finished and back online again tonight...
but here's a link to my project at the swedish Fiatclub..
http://sfk.ibk.se/forum/showthread.php?s=&postid=65984#post65984
Posted By: Anonymous
Re: Show us your alloys!!!! - 10/03/2007 06:41
hi TurboNimitz
as you have no wheel pics, are there any nice chicks in the swedish fiat club?
Posted By: Anonymous
Re: Show us your alloys!!!! - 12/03/2007 14:47
hi TurboNimitz
as you have no wheel pics, are there any nice chicks in the swedish fiat club?
No wheelspics? Just click the link and there's lots of pics dude
not soo many chicks no
Posted By: Anonymous
Re: Show us your alloys!!!! - 12/03/2007 22:37