Fiat Coupe Club UK
List of Wheels
Posted By: Anonymous
List of Wheels - 10/03/2006 00:26
As the name suggests. Just thought it would be nice if we could have a list of all after market wheels that will defiantly fit the Fiat Coupe 20VT.
What would be nice is if you could have the pcd of 98 standard fit along with size of wheel along with offset and the clearance from the Brembo`s. Any problems you`ve had etc.
Then have the after market pcd's of 100 with the same criteria above please.
Oh pictures would be fantastic if you have them
Reason I`ve asked this is because I`ve had so much trouble just finding ones that fit my car
cheers everyone
Posted By: Anonymous
Re: List of Wheels - 10/03/2006 02:13
To get the ball rolling...
18" Wheelmania Jades
Dave
Posted By: Anonymous
Re: List of Wheels - 10/03/2006 02:16
im in the same boat as u
ive spent nearly 5 days on the net / phone looking for straight swap no spacers or wobbly bolts wheels in 17", i even visited 3 diffrent wheels companys for a trial and error trying to find a wheel but no luck as yet, after talking to roger today at powerfiat (
top man with knowledge and free advice
) he's convinced me to go for 18" azevs, im so stressed from looking and getting conflicting info from all the people ive spoken to i may just go for the azev C's.
Posted By: Anonymous
Re: List of Wheels - 10/03/2006 02:57
Perfect fit.
4x98pcd, clears the Brembos with more room than the oe alloys.
18" Dare V5's
Picture of the wheel:
Dare V5 And a couple of pictures of my Coupe with them on:
1.
From the back 2.
From the front 3.
From the side (before she was lowered)
Posted By: Anonymous
Re: List of Wheels - 10/03/2006 03:35
Quote:
Perfect fit.
4x98pcd, clears the Brembos with more room than the oe alloys.
18" Dare V5's
Picture of the wheel: Dare V5
And a couple of pictures of my Coupe with them on:
1. From the back
2. From the front
3. From the side (before she was lowered)
That is exactly what I`m after. Not the wheels but the info, pictures and details. Anymore like this please? 
Bambam. I`m in the same boat as you. Does your head in after a while 
Posted By: Anonymous
Re: List of Wheels - 10/03/2006 05:07
Circolo what is the offset or ET on the Dares? Looking very nice I want to upgrade to 18's.
BTW Graham your in for a hard time unless you get wheels made up like the Azev's. I was told my 17 x 7.5 with 30ET AWS Racing would fit with no spacers or wobblys but when they came they where a couple of mm out and wouldn't clear the Brembos so had to get spacers. Hub Centric spacers are fine its the wobblys that Im not so keen on.
AWS Racing on car pic of spacer
Posted By: Anonymous
Re: List of Wheels - 10/03/2006 10:38
17 inch Dare V1's.
PCD 4 by 100 (so wobbly bolts required)
ET 20
Clear Brembo's by a mile and no spacers needed.
Nice looking wheel, not too boy racer and suit Coupe nicely
Also spent days searching and Dare were the only company that actually got back to me with sensible and knowledgeable answers. Good on them!
Posted By: Anonymous
Re: List of Wheels - 10/03/2006 11:51
Quote:
Circolo what is the offset or ET on the Dares? Looking very nice I want to upgrade to 18's.
BTW Graham your in for a hard time unless you get wheels made up like the Azev's. I was told my AWS Racing would fit with no spacers or wobblys but when they came they where a couple of mm out and wouldn't clear the Brembos so had to get spacers. Hub Centric spacers are fine its the wobblys that Im not so keen on.
Not 100% sure on the offset. I think he quoted et29 - pushing them out further than the standard by about 1cm. That said, they look slightly less pushed out than I'd expected.
I ordered these from these guys , I contacted them by phone, and spoke to someone who seemed to know the Coupe 20vt wheel fitting problems - and he recommended Dare V5's saying they were a perfect fit - which they were.
No spacers, no wobbly bolts, no rubbing.
Posted By: Anonymous
Re: List of Wheels - 10/03/2006 11:52
Quote:
17 inch Dare V1's.
PCD 4 by 100 (so wobbly bolts required)
ET 20
Clear Brembo's by a mile and no spacers needed.
Nice looking wheel, not too boy racer and suit Coupe nicely
Also spent days searching and Dare were the only company that actually got back to me with sensible and knowledgeable answers. Good on them!
I looked at the V1's too. But the guy at topgear (see above) said these weren't such a good fit. And they come only as 17" max wheel diameter.
Posted By: Anonymous
Re: List of Wheels - 10/03/2006 13:57
The V1 are not such a perfect fit as the V5 because the V5 are 4 by 98 so no wobble bolts needed. No spacers should be needed for either wheel. Like many others I would have preferred straight fit but there is nothing wrong with wobble bolts and I wanted the V1.
Its all a matter of taste - I prefer V1 to V5 since they 'suit' the coupe and I did not want an OTT look hence 17's were perfect for me.
Google search for Dare Motorsport if you want to talk to them directly - they are good guys.
Posted By: Anonymous
Re: List of Wheels - 10/03/2006 14:23
Quote:
Circolo what is the offset or ET on the Dares? Looking very nice I want to upgrade to 18's.
BTW Graham your in for a hard time unless you get wheels made up like the Azev's. I was told my AWS Racing would fit with no spacers or wobblys but when they came they where a couple of mm out and wouldn't clear the Brembos so had to get spacers. Hub Centric spacers are fine its the wobblys that Im not so keen on.
Exactly my point. I`ve had same trouble as bambam. Get one company say no problem then another saying they wont fit.
That is why I thought i`d do this thread. I was hoping it will end up like the show us your motors thread or show us your rears thread, but so far only have one wheel that fits perfectly, and that`s an 18"
Posted By: Begbie
Re: List of Wheels - 10/03/2006 14:24
Compomotive Mo's
7.5" x 17"
4 x 98pcd
35mm Offset
Posted By: Anonymous
Re: List of Wheels - 10/03/2006 14:40
LOL nice pic begbie. Your gonna get shot for that
Nice wheels but they're white
Posted By: Anonymous
Re: List of Wheels - 10/03/2006 18:24
Go to
this place. Select alloys from the menu, then choose your car, model date etc.
Select all brands.
There are 5 pages of full of wheels that apparently will fit.
From my experience with computer databases though, I would still confirm fitment with a human at the place before placing an order.
Posted By: Anonymous
Re: List of Wheels - 10/03/2006 18:31
Quote:
Go to this place.
Select alloys from the menu, then choose your car, model date etc.
Select all brands.
There are 5 pages of full of wheels that apparently will fit.
From my experience with computer databases though, I would still confirm fitment with a human at the place before placing an order.
This is the problem. I have contacted that company and with all the wheels listed only two of them they can confirm fits. They suggest you go and have the ones you like test fitted.
What most of these places are forgetting is the size of the brembos.
Quite a few forum members have ordered wheels after being told they will fit only to find they don`t clear the brembo`s.
The only way we can be absolutely 100% sure is from fellow forum members
Posted By: Begbie
Re: List of Wheels - 10/03/2006 18:41
Avez A and E wheels fit as a direct fitment, 4 x 98pcd and correct offset with no fouling on the calipers. You can only get them via DT motorsport and are not cheap either, also a bit of a wait for them too
Posted By: Anonymous
Re: List of Wheels - 10/03/2006 18:54
So what we have so far is:
PCD 9817" Compomotive Mo's
17" Azev A
18" Azev M
18" Azev C
18" Azev E
18" Dare V5
PCD 100 Wobbly bolts required 17" Dare V1
18" Wolfrace Urban Racers
18" TSW Ribs
PCD 100 Wobbly bolts and spacers 
18" Kosei Titanium Racers
I must state that all these wheels I am listing are collectively from Forum members. I am purely doing this as a guide for fellow forum members.
I therefore can not be held responsible for any wrong info.
Posted By: Begbie
Re: List of Wheels - 10/03/2006 19:02
Posted By: Anonymous
Re: List of Wheels - 10/03/2006 19:17
Begbie, are all these wheels 17" ?
Posted By: Begbie
Re: List of Wheels - 10/03/2006 19:26
Well i know The M fits as an 18" as done by Big Lad. The C fits as an 18" as a couple of members have done it on here (James Richardson springs to mind) and the Avez A is 17" as Kevin has them and the Avez E is 18" and Taz has them fitted
You also have the wolfrace urban racer in 18" which clears the calipers but requires wobble bolts for the 4 x 100pcd
Posted By: Anonymous
Re: List of Wheels - 10/03/2006 19:30
Will any of the Fox range fit?
ie. Fox 17" FP2 (7X17)(4X98)(ET37)
anyone tried these?
Posted By: Anonymous
Re: List of Wheels - 10/03/2006 19:36
Begbie your a star
This is just the info I would like and I`m sure i`m not the only one
I`ll add to the list when we get more wheels listed
Posted By: Anonymous
Re: List of Wheels - 10/03/2006 20:37
At the moment I'm running Kosei Titanium Racers 18 x 7.5, They are a 4x98 PCD, offset is 35 and they fit with a 7.5mm spacer on a 20vt.
Link to site here:
Kosei Racer I will post a pic of my coupe after I've washed it and polished all the scratches off the rim so you don't think I'm a bad parker
pics now here:
Kosei Racers Kosei Racers Kosei Racers Hamster
Posted By: Anonymous
Re: List of Wheels - 10/03/2006 23:32
Well ill add my tuppence worth - Im running 18" TSW Ribs, 4x100 PCD, no spacers and they clear the Brembos without fault
Nice anthracite colour means i can get away without washing them for a bit too....
http://i19.photobucket.com/albums/b173/Maxxxer/Photo0032.jpg
I am fairly sure that the OZ Supperleggeras fit the 20VT without any mods. Also, Marshy (I think) had the OZ Chrono Evolutions on his. Both of those wheels are very light.
I beleive that the OZ Records fit the Turbo too - I was told that they did when I had them fitted on my NA
Posted By: Begbie
Re: List of Wheels - 10/03/2006 23:37
Oz Superleggera's dont fit the 20vt. They are 4 x 100pcd and you need at least 6.5mm spacer or above to clear the calipers.
Cant really comment on the OZ Chrono's as they were fitted to a 16vt which doesn't suffer caliper clearance
Posted By: Anonymous
Re: List of Wheels - 11/03/2006 02:24
Begbie, do you know if the Compomotive MOs fit over the 20VT calipers in 17s? I seem to recall that they are lighter than standard alloys, which could be advantageous for reducing unsprung weight
.
Phil
Posted By: Freddan72
Re: List of Wheels - 11/03/2006 02:29
Quote:
Avez A and E wheels fit as a direct fitment, 4 x 98pcd and correct offset with no fouling on the calipers. You can only get them via DT motorsport and are not cheap either, also a bit of a wait for them too
What ET should a Azec C 17" have to fit without spacers?
Posted By: Begbie
Re: List of Wheels - 11/03/2006 05:19
Quote:
Begbie, do you know if the Compomotive MOs fit over the 20VT calipers in 17s? I seem to recall that they are lighter than standard alloys, which could be advantageous for reducing unsprung weight .
Phil
Phil, i run 20vt calipers on the coupe See below :
As for weight? Well there are about 9kg each and are heavier than my Oz Superleggera's
Posted By: Anonymous
Re: List of Wheels - 11/03/2006 15:10
Thanks Begbie. Good clearance, but the weight is still pretty high
. Anyone know of any nice light wheel options that you fit?
By the way Begbie, is it a mods only priviledge to post images in the posts now, or can anyone do it?
Phil
Posted By: Anonymous
Re: List of Wheels - 11/03/2006 15:53
pro race i think would be lighter but only 17's and not sure if they still make them now?
Posted By: Anonymous
Re: List of Wheels - 11/03/2006 18:10
Good point Highwayman!!! I didn't actually notice that until you metioned it there!!!
I miss the photos in posts!!!!
Posted By: Anonymous
Re: List of Wheels - 12/03/2006 05:57
I noticed it straight away Begbie. Go on tell us the secret!
Posted By: Begbie
Re: List of Wheels - 12/03/2006 17:54
I cant, been told im not allowed to do it anymore
Posted By: Anonymous
Re: List of Wheels - 12/03/2006 18:02
What we have so far is:
PCD 98 17" Compomotive Mo's
17" Azev C,E,U and LS
17" Team Dynamics Pro Race 1.2 ET25
18" Azev C,E,M,U,FS and LS
18" Azev C
18" Azev E
18" Dare V5
PCD 100 Wobbly bolts required 17" Dare V1
18" Wolfrace Urban Racers
18" TSW Ribs
PCD 100 Wobbly bolts and spacers 18" Kosei Titanium Racers
18" Wolfrace Twin-Blade ET35 3mm Spacers
18" OZ Superleggera 7mm Spacers
I must state that all these wheels I am listing are collectively from Forum members. I am purely doing this as a guide for fellow forum members.
I therefore can not be held responsible for any wrong info.
Posted By: Anonymous
Re: List of Wheels - 12/03/2006 19:15
Team Dynamics Pro Race 1 fit without spacers or wobble bolts, 7x17in, 17.6lbs
Begbie
Don't the Superleggera come in 4x98? My OZ Records were a 4x98 fit (at least as far as I know
- Keith @ Auto-Integrale fitted them for me)
For the weights (but not fitment) check this site:
Wheels Weights pageFor reference, the standard 20 vt coop wheel - according to what people here had weighed it - is 21.5 lbs / 9.77 kgs
Posted By: Anonymous
Re: List of Wheels - 12/03/2006 22:31
Also the wheelmania Jade in 18, straight on i think
One that same site, these would look great, if only these would fit:
Racing Harts
Posted By: Anonymous
Re: List of Wheels - 13/03/2006 00:48
17" Momo Fighters fit, but with spacers and wobbly bolts
Posted By: Begbie
Re: List of Wheels - 13/03/2006 04:13
Enfant as far as im aware, OZ never have made any wheels in the 4 x 98pcd always 4 x 100.
Graham if your adding wheels with spacers you can stick Oz Superleggera's down in 17" with wobble bolts and 7mm + spacers
Posted By: Anonymous
Re: List of Wheels - 13/03/2006 04:35
Begbie, I will do mate. Just waiting for a few more wheels before I update.
There must be more that fits? I`m sure there is a lot more members on here with wheels different to standard and what has already been put down
Posted By: Anonymous
Re: List of Wheels - 13/03/2006 17:22
What tire measurements are you using with 17" and 18" wheels?
Thanks
Posted By: Anonymous
Re: List of Wheels - 15/03/2006 16:34
I think it's very important for posters to state which model coupe they fit, as there is the problem with caliper clearance.
Hamster
Posted By: Anonymous
Re: List of Wheels - 15/03/2006 20:57
Good point Hamster. The details I`m after is for a 20VT. Looks like this thread has already died as no one seems to be adding anything
Posted By: Anonymous
Re: List of Wheels - 15/03/2006 21:37
It's doing a lot better than my thread "List of Tyres." I am so surprised that so many people have so little to say on two really useful topics.
Considering most user's preoccupation with post counts, I thought these two topics would have gone double platinum with the amount of posts.
The replies that say "I
think ..... will fit" or the, "I don't know about that, but blah blah...... etc etc" are particularly useless. I'm not going to shell out the best part of a grand or more on a wheel/tyre combination unless I am 100% certain of the fitment.
I don't want to travel all around the country to try rims on, or take the advice of a fitter from the local job centre over the phone just to turn up at their outlet or mail order them and be angrily disappointed.
I thought we were all trying to build up some kind of knowledge database for the benefit of existing and potential members - perhaps I'm wrong, I hope so.
Hamster
And I didn't even mention post hijacking!
Posted By: Anonymous
Re: List of Wheels - 15/03/2006 21:45
LOL You got that off your chest now? You feel better
I contacted Azev in Germany and got this reply about what wheels will fit a 20VT with 98 pcd.
Type Azev A/C/U/AS/LS 8 x 17
Type Azev C/E/M/U/AS/FS/LS 8,5 x 18
Thats is the reply I got.
The German forum has pics of a number of wheels on the Coupe. However, you would need to translate the info to see what they had done to get them to fit.
If you are interested, this is the site:
http://www.fiatcoupe-freunde.de/Have a look under Owners
(I think Spurplatte means spacer)
Posted By: Anonymous
Re: List of Wheels - 15/03/2006 22:54
There is one on ebay at the moment with 17" 1000+ miglia alloys so I guess these fit too
click
Posted By: Anonymous
Re: List of Wheels - 16/03/2006 14:26
Quote:
I contacted Azev in Germany and got this reply about what wheels will fit a 20VT with 98 pcd.
Type Azev A/C/U/AS/LS 8 x 17
Type Azev C/E/M/U/AS/FS/LS 8,5 x 18
Thats is the reply I got.
I love Avez C's and would really like them in 17s. Someone called MistaSmith used to have them on a black 20vt and they looked wicked! Just need to find the money :-(
Stu
Posted By: Jimbo
Re: List of Wheels - 16/03/2006 18:56
Is an 8.5 X 18 ok to use on the coupe, I would have thought it was a little wide, especially as you'd need a wide tyre to strech over the rim ?
You really dont want to go too wide a tyre on the coupe or it starts to suffer from tramlining and wandering.
Posted By: Anonymous
Re: List of Wheels - 17/03/2006 00:30
Jimbo,
That information I got was from Azev themselves in Germany. All I have done is copy their response. I really don`t know what is good or not anymore.
Thought this thread might be a good idea. How wrong can someone be. Still getting the same problems.
Oh well I tried
Posted By: Anonymous
Re: List of Wheels - 17/03/2006 02:31
I just bought Team Dynamics Pro Race 1.2 17" ET25 they are straight fit to the 20vt without spacer, and a weight of 7.9 kg!
<< Team Dynamics Pro Race 1.2 >>
Posted By: Anonymous
Re: List of Wheels - 17/03/2006 09:10
The best looking wheels for a coupe in my opinion are 17" Kahn RS-R's.
Posted By: Anonymous
Re: List of Wheels - 17/03/2006 12:05
interesting Yogisdk, as i was emailed saying they would not fit the coupe....
Posted By: Freddan72
Re: List of Wheels - 17/03/2006 12:07
Quote:
LOL You got that off your chest now? You feel better
I contacted Azev in Germany and got this reply about what wheels will fit a 20VT with 98 pcd.
Type Azev A/C/U/AS/LS 8 x 17
Type Azev C/E/M/U/AS/FS/LS 8,5 x 18
Thats is the reply I got.
What offset do I need to fit Azev C 17"?
Posted By: Anonymous
Re: List of Wheels - 17/03/2006 13:38
Well depends on what size you asked for, as I can read from the catalog i received with the wheels, the 7x17" model is identical to the ProRace 1, which fits straight...There was one other model identical but cant remember...If you were looking for other sizes then they wont fit straight i guess
Posted By: Anonymous
Re: List of Wheels - 17/03/2006 13:44
I just checked the online catalog from the german site:
"verwendungsbereich 7,0x17 und 8,0x17 identisch mit PRO RACE 1 in Zuordnungsliste" which translates to
"operating range 7,0x17 and 8,0x17 identically to PRO RACE 1 in zuordnungsliste"
No i wonder what is that last word
I guess is the application list, like if it says the coupe can fit pro race 1 7,0x17 then can fit these ones...
Posted By: Begbie
Re: List of Wheels - 17/03/2006 14:13
Quote:
Jimbo,
That information I got was from Azev themselves in Germany. All I have done is copy their response. I really don`t know what is good or not anymore.
Thought this thread might be a good idea. How wrong can someone be. Still getting the same problems.
Oh well I tried
Dont be disheartned about it, we have a fairly good list of wheels that do fit and in various way, be it the correct pcd, wobble bolts and wobble bolts and spacers
Posted By: Anonymous
Re: List of Wheels - 17/03/2006 18:24
Hi Yogisdk
Is is a nice wheel, what colour did you buy, is ET25 too much? Can we see some pictures?
I have been trying to buy the same wheels (pro-race 1 or 1.2 anthracite if possible) for a few months, but no outlet will order them for me, it is either no stock or they won't fit 20vt
. Where did you buy yours from
?
Posted By: mattB
Re: List of Wheels - 17/03/2006 18:31
Quote:
What offset do I need to fit Azev C 17"?
When buying Azev wheels, they machine the wheels to fit specifically to the car, so if you order them for a 20VT, they will come as pcd 4x98 and in the correct offset, whatever that might be.
Posted By: Anonymous
Re: List of Wheels - 17/03/2006 18:34
I orderd them from the german dealer, the price was much cheaper than denmark at least...I was at first interested in pro race 1, but he told me is discontinued...I bought the standard color as in that picture, wasnt so sure how would the anthracite look but i guess woule be very nice with some coupe colors(mine is a black LE).
Dunno about the ET25, i know it came along with TUV papers certified for the coupe 20vt, using 210/40/17 wheels...Pictures will come later, as soon as the snow and salt is awy from our roads!!
Posted By: Anonymous
Re: List of Wheels - 17/03/2006 23:03
Thanks Yogisdk.
I just need to find a better UK dealer.
Posted By: Anonymous
Re: List of Wheels - 17/03/2006 23:06
Quote:
Quote:
What offset do I need to fit Azev C 17"?
When buying Azev wheels, they machine the wheels to fit specifically to the car, so if you order them for a 20VT, they will come as pcd 4x98 and in the correct offset, whatever that might be.
Matt is that correct. No matter what wheels you want?
Thats annoying. When I sent an email asking them which ones will fit, why didn`t they just say what you have
Posted By: mattB
Re: List of Wheels - 18/03/2006 02:54
Yes mate, as far as i'm aware they make the wheels to fit the car, which is why lots of their wheels have a long lead time on them.
Posted By: Freddan72
Re: List of Wheels - 18/03/2006 15:03
I asked Azev about offset. They said that for Azev type C 8x17" the right offset is 30. Mine have offset 40 so I need to buy spacers. Damn!
Posted By: Anonymous
Re: List of Wheels - 19/03/2006 00:53
Wolfrace Twin-Blade 18"x8j ET35 PCD100 with wobbly bolts, a very close fit on the front caliper on a 20vt so I used a 3mm spacer to give a touch of clearance.
Wolfrace Twin-Blades Hamster
Posted By: Anonymous
Re: List of Wheels - 17/04/2006 22:50
what about us 20v n/a's??
are we 4x98 pcd to? what ET are we aswell?
I want some 17" boss xtt's but aint sure if they will fit.
Posted By: Anonymous
Re: List of Wheels - 17/04/2006 23:03
You have alot more choice as you don`t need the clearance of the Brembos.
I`m sure someone more experienced will come along and give you more info
Posted By: Anonymous
Re: List of Wheels - 17/04/2006 23:05
hope so...crossing fingers....
Posted By: tonyd20vt
Re: List of Wheels - 18/04/2006 21:31
Quote:
Wolfrace Twin-Blade 18"x8j ET35 PCD100 with wobbly bolts, a very close fit on the front caliper on a 20vt so I used a 3mm spacer to give a touch of clearance.
Wolfrace Twin-Blades
Hamster
bl**dy hell, bling bling. I'll just put my sun glasses on!!
Posted By: Anonymous
Re: List of Wheels - 18/04/2006 22:35
Quote:
what about us 20v n/a's??
are we 4x98 pcd to? what ET are we aswell?
I want some 17" boss xtt's but aint sure if they will fit.
yeah its 4x98 and im sure an et of 35, should be no clearance issues with any wheels
ps you will be told that wheels dont fit by some wheel monkeys as they automatically assume you have the turbo version
Posted By: Anonymous
Re: List of Wheels - 20/04/2006 03:26
What are the wheels on this car ?
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?V...bayphotohostingIt has a hint of Vanquish about it in that photo.
Posted By: Taffy20vt
Re: List of Wheels - 20/04/2006 03:53
Quote:
What are the wheels on this car ?
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?V...bayphotohosting
It has a hint of Vanquish about it in that photo.
Thats Otis B's Car I think
Doh ! Just seen his Add in 'Cars for sale'
Posted By: Anonymous
Re: List of Wheels - 20/04/2006 17:43
I have 19" Kahn RSVs on my coop, not sure about the offset, but no spacers required
Posted By: Anonymous
Re: List of Wheels - 20/04/2006 19:23
davidC, they look the same as the alloys on my car, which are hp racing (or sold as motion alloys). They do not fit the 20vt without spacers, min 5mm. Also the shop that sold them has not had stock for 6 months now
hope i never twang one badly...
alloy pic alloy pic 2
Posted By: Anonymous
Re: List of Wheels - 20/04/2006 19:26
having said that i think this is the same owner that has a set of HP racing that do fit without spacers, as this is what made me go out and buy a set. thought the car was black, but the other pics show it as green. sure it was a green coupe that has the same set.... Adam
Posted By: Anonymous
Re: List of Wheels - 21/04/2006 20:51
ajg, that link doesn't work. It's say the photo is no longer there. Could you repost it for me please?
Cheers,
DC
Posted By: Anonymous
Re: List of Wheels - 21/04/2006 22:06
Hi, does anybody know if the 17" dare v5's fit on the 20vt ok i really like the look of the 18" ones at the begining of this thread but dont have that deeper pockets lol? cheers
Posted By: Anonymous
Re: List of Wheels - 22/04/2006 00:18
reposted, hope it works now
Posted By: Anonymous
Re: List of Wheels - 22/04/2006 00:18
Quote:
Hi, does anybody know if the 17" dare v5's fit on the 20vt ok i really like the look of the 18" ones at the begining of this thread but dont have that deeper pockets lol? cheers
Asked Dare which wheels would fit the coupe 20VT
The answer I got was:
1/ 17x7.0 Dare V1 4-100/18 Vari-bolts reqd but no spacers.
2/ 18x7.5 Dare V5 4-098/25 Direct fit.
Posted By: Anonymous
Re: List of Wheels - 25/04/2006 04:54
turbo, what tyres you using, and could you tell me if you had to mod the front inners to get them on? cheers
Posted By: Anonymous
Re: List of Wheels - 28/04/2006 04:41
I cant remember the tyre size off the top of my head, the car is at auto integrale at the moment, I wont be getting it back for a couple of weeks but as soon as I do I will let you know. As far as I know, there was no arch mods required.
Posted By: Anonymous
Re: List of Wheels - 30/04/2006 02:15
cheer's guys... 18's here i come!
Posted By: Anonymous
Re: List of Wheels - 30/04/2006 03:30
Just have to show you a friend of mine's car. same rims as Hamster maby
http://sfk.ibk.se/depa/showfile.php?carpic_no=1410&type=picture
Posted By: Anonymous
Re: List of Wheels - 30/04/2006 03:35
great mix of colours there TurboNimitz
iam just a bit scared of the ghost comimg out of the gray coupe!
Kev
Posted By: Anonymous
Re: List of Wheels - 30/04/2006 03:52
hamster ri=ums kosei rims, not the ones on that coupe TurboNimitz
Posted By: Anonymous
Re: List of Wheels - 30/04/2006 03:59
yeah busa1300 it startet with a alfaromeo meeting...
http://sfk.ibk.se/depa/showfile.php?carpic_no=1418&type=picturebut me and some friens came around and hade a little fiat meeting...:)
six coupe totaly
http://sfk.ibk.se/depa/showfile.php?carpic_no=1423&type=pictureA little offtopic but what the...
cheers
Posted By: Anonymous
Re: List of Wheels - 30/04/2006 12:36
the yellow coupes wheels do actually look pretty nice, not a fan of yellow (sorry busa
) but that looks right for some reason. maybe its the nice sunny day helping out
Posted By: Anonymous
Re: List of Wheels - 04/05/2006 01:40
What kind of wheels on this yellow coop?
Type? Size?
Posted By: Anonymous
Re: List of Wheels - 04/05/2006 01:42
what about theese 17" on my coupe
mfcoop
I am sure those are Momos - though can't remember the model. They do look good - don't what fitmewnt they are, and whether they need wobblies etc.
Posted By: Anonymous
Re: List of Wheels - 05/05/2006 00:13
there fox3 evos and straight fit
Posted By: Anonymous
Re: List of Wheels - 05/05/2006 00:27
On the 20vt??? are you sure?
Posted By: Anonymous
Re: List of Wheels - 05/05/2006 00:29
see the avitars mine is 16v and enfant is 20v no mention of turbo are they diff stud offset then
Posted By: Begbie
Re: List of Wheels - 05/05/2006 03:15
Quote:
see the avitars mine is 16v and enfant is 20v no mention of turbo are they diff stud offset then
More an issue with caliper clearance with the brembo's on the 20vt
Posted By: Anonymous
Re: List of Wheels - 10/05/2006 06:01
Same as Circolo Ive just had 18' Dare V5's fitted (Actually made by Eta Beta). Exact fit. No spacers, No wobbly bolts. Not even rubbing and still get full steering lock.
Pic here .
Posted By: Anonymous
Re: List of Wheels - 10/05/2006 06:30
I don't know about you there, but in my country the 18" tyres are 2x more expensive than 17"s!!!
Just as reference:
4 x Eagle gsd3 F1 215/40x17 = 700
4 x Eagle gsd3 F1 215/35x18 = 1300!!!
How so many of you go to 18" wheels??? it's just a matter of looks because IMO the 17"s are even more confortable and I don't think that performance will be so much different between the 2
Posted By: Anonymous
Re: List of Wheels - 10/05/2006 19:07
ally they are lush, where did you get them?
Posted By: Anonymous
Re: List of Wheels - 25/05/2006 17:08
Decided to update this thread as so many new members are asking about wheels. If you have anymore to add on here then let me know please.
All these wheels are listed to fit the 20VT with Brembo Calipers. Members with NA or 16V/16VT will have a greater choice as wont have clearance problems
What we have so far is:
PCD 98 17" Compomotive Mo's
17" Azev C,E,U and LS
17" Team Dynamics Pro Race 1.2 ET25
17" Ronal Lz
17" Ronal R38 =
Courtesy of Nelson 17" Ronal R39
17" Ronal R42
18" Azev C,E,M,U,FS and LS
18" Azev C
18" Azev E
18" Dare V5
PCD 100 Wobbly bolts required 17" Dare V1
18" Wolfrace Urban Racers =
Courtesy of Mark 18" TSW Ribs =
Courtesy of Clark PCD 100 Wobbly bolts and spacers 18" Kosei Titanium Racers
18" Wolfrace Twin-Blade ET35 3mm Spacers =
Courtesy Of Hamster 18" OZ Superleggera 7mm Spacers
I must state that all these wheels I am listing are collectively from Forum members. I am purely doing this as a guide for fellow forum members.
I therefore can not be held responsible for any wrong info.
One of our members here has the Oxigin Toxics, and they are apparently a straight fit on a 16vt. They may need spacers for the 20vt however
Posted By: Anonymous
Re: List of Wheels - 07/06/2006 07:37
Graham,
You can add:
Et27 98pcd (No spacers; no wobbly bolts)
Ronal Lz 17"
Ronal R38 17"
Ronal R39 17"
Ronal R42 17"
The list is growing
Posted By: Anonymous
Re: List of Wheels - 07/06/2006 16:56
As the list is now growing
I would like to add to this a link next to each one showing a Coupe with that particular wheel in that size. Please pm with your pics along with the link
cheers
Posted By: Anonymous
Re: List of Wheels - 07/06/2006 20:31
great list! is this sticky yet?
Posted By: Anonymous
Re: List of Wheels - 07/06/2006 20:59
Gumball
A sticky???
What is your wheels?
Posted By: Anonymous
Re: List of Wheels - 07/06/2006 21:03
A sticky means the thread is stuck to the top of the page. I.e. when new posts are made the autmotically go below it. Meaning his thread would never leave the top of the page.
Posted By: Anonymous
Re: List of Wheels - 07/06/2006 21:10
oh.OK. Hardly think this thread is that important though
Posted By: Anonymous
Re: List of Wheels - 08/06/2006 09:24
I think it could or can be
There are inumerous mates searching for aftermarket wheels on the forum.
I think is just a matter of a forum moderator evaluate the importance of this topic though.
Posted By: Anonymous
Re: List of Wheels - 08/06/2006 13:51
I agree - making this sticky would be excellent. I remember how hard it was to find the right wheels for my 20vt, and only some extensive searching, calling and visting different wheel and tyre places was I able to go for the ones I have now (Dare v5's).
Making this sticky, would help a lot of people, and hopefully reduce the number of "which wheels will fit my Coupe?" type questions.
Posted By: Anonymous
Re: List of Wheels - 08/06/2006 15:36
Need pics please to add to the thread
Posted By: Anonymous
Re: List of Wheels - 09/06/2006 05:07
Ok so PCD should be 98, but what is the actual correct offset?
Also what size tyres are people running on 17s / 18s?
Posted By: Anonymous
Re: List of Wheels - 09/06/2006 07:15
The correct offset depends on spoke wheels design but nevertheless it has to be low.
Somewhat near 30. Best if it's lower because it will provide more space to clear the brembos.
The correct size tyre in a 17" wheel will be 205/45 (this giving a marginaly wider gear final ratio - the speedo will read more speed than actualy's running)
Or the 215/40 (this giving a marginaly tighter gear final ratio - the speedo will read a little less speed than actualy's running)
Of course any speedo has it's own margin of error. The coops are somewhat near 10km/h thus reading 260 when you are really running at 250kms/h)
Posted By: Anonymous
Re: List of Wheels - 09/06/2006 07:16
I can only send the ronal R38 that I've photographed a couple of days ago.
I don't have any more 20vt wheel pics.
I'll PM you Graham with the pics.
Cheers
Posted By: Anonymous
Re: List of Wheels - 09/06/2006 20:58
Right got my first pic attached to the thread. Thanks Mark.
18" Urban Racers.
Who else wants their Coupe on show?
Please send me a pm with a link
cheers
Posted By: Anonymous
Re: List of Wheels - 09/06/2006 21:46
You have PM Graham
Posted By: Anonymous
Re: List of Wheels - 09/06/2006 23:26
i've got the the tsw ribs 18"
Posted By: Anonymous
Re: List of Wheels - 10/06/2006 05:39
@ Graham - no probs mate - glad to help getting the ball rolling!
Posted By: Anonymous
Re: List of Wheels - 11/06/2006 23:52
Adding pictures of Coupes with each wheel attached.If you have any of the ones listed below please pm with a link. Preferably showing a nice side on view
All these wheels are listed to fit the 20VT with Brembo Calipers. Members with NA or 16V/16VT will have a greater choice as wont have clearance problems
What we have so far is:
PCD 98 17" Compomotive Mo's =
begbie 17" Azev C =
mattB 17" Azev E
17" Azev U
17" Azev LS
17" Team Dynamics Pro Race 1.2 ET25
17" Ronal LZ
17" Ronal R38 =
nelson 17" Ronal R39
17" Ronal R42
18" Azev C
18" Azev E
18" Azev M =
Bambam 18" Azev U
18" Azev FS
18" Azev LS
18" Dare V5 =
allystew PCD 100 Wobbly bolts required17" Dare V1
18" Wolfrace Urban Racers =
mburns 18" TSW Ribs =
Clark 18" MAK Sting ET35 =
JAX PCD 100 Wobbly bolts and spacers 18" Kosei Titanium Racers
18" Wolfrace Twin-Blade ET35 3mm Spacers =
Hamster 18" OZ Superleggera 7mm Spacers
I must state that all these wheels I am listing are collectively from Forum members. I am purely doing this as a guide for fellow forum members.
I therefore can not be held responsible for any wrong info.
Posted By: Begbie
Re: List of Wheels - 13/06/2006 00:35
Posted By: Anonymous
Re: List of Wheels - 13/06/2006 01:08
Fox racing i'll post a pic up soon.
Posted By: Anonymous
Re: List of Wheels - 13/06/2006 03:06
Quote:
My Compomotive Mo's
Begbie. I got to remove yours. Yours is a 16V. didn't realise that
Posted By: Jimbo
Re: List of Wheels - 13/06/2006 03:37
Graham, those 18" wheels on Alleystews picture arent Dare V5's ?
These are Darve V5's
Posted By: Anonymous
Re: List of Wheels - 13/06/2006 04:01
18" Oxigin 3, no spacers just the correct offset and PCD...
Posted By: Anonymous
Re: List of Wheels - 13/06/2006 04:16
symon
Your coupe is a 16v mate. You don't have any problems with clearance,hence the reason I've only been listing for 20VT's
We've had so many new members ask about wheels for the Coupe 20VT because of the Brembo clearance. Thats why I decided to start this thread
Posted By: mattB
Re: List of Wheels - 13/06/2006 04:17
Begbie has Brembos fitted to his 16VT.
Posted By: Anonymous
Re: List of Wheels - 13/06/2006 06:59
Does anyone have Dare Tettsutx on his coop? If there is someone some pics would be nice.....from the picture taken here
http://swtyres.co.uk/wheels/dare/tettsutx, I think it would be nice on coop
Posted By: Anonymous
Re: List of Wheels - 13/06/2006 13:18
Sorry, I didn't see the bit about this thread being for the 20 valvers... Still much of the wheel fitment is the same, like PCD.
Posted By: Begbie
Re: List of Wheels - 13/06/2006 14:34
Quote:
Quote:
My Compomotive Mo's
Begbie. I got to remove yours. Yours is a 16V. didn't realise that
As MattB said I have brembo's
Posted By: Anonymous
Re: List of Wheels - 13/06/2006 15:18
begbie, your back in mate
When you getting the coupe resprayed?
Posted By: Begbie
Re: List of Wheels - 13/06/2006 15:29
Once the engine is rebuilt and running
Posted By: Anonymous
Re: List of Wheels - 13/06/2006 15:54
So that will be next summer then
Posted By: Anonymous
Re: List of Wheels - 28/09/2006 01:45
This needs a BUMP. Still require pics of wheels are peeps Coupe.
Also. How do I bring the list to the end of the page including picture links without having to redo the lot?
Posted By: Anonymous
Re: List of Wheels - 28/09/2006 03:16
Err, mine are non-standard, shown in pic, not sure what they are.
The guys at the south east meet said there was no spacers.
Never taken 'em off...yet...
Posted By: Anonymous
Re: List of Wheels - 30/09/2006 03:29
I have 17 Tsw reflex pcd 4x98 with no spacers.
Its a very tight fit and they probably cloud do with a 5mm spacer on there.
Ok just measured the clearance on the rims and its 2.5mm.
I have had them on there for over a year now with no probs.
Posted By: Anonymous
Re: List of Wheels - 30/09/2006 04:05
Bernie send us a pic with them on your car and I'll add them to the list.
Come on people still got loads that needs pics
Posted By: Anonymous
Re: List of Wheels - 30/09/2006 13:17
There being refurb at the mo (in inc black) so I will post then.
Err
how do you post pics as well as I have never done this
Posted By: Anonymous
Re: List of Wheels - 01/10/2006 21:57
ok so i under stand the pcd but what is the offset is that the distance from the hub to the out side of wheel plus what is the minimum off set. plus ive noticed most alloys are 100 pcd so whats the big problem with wobblys and what are the effects
Posted By: Jimbo
Re: List of Wheels - 06/10/2006 19:40
Does anyone have any info on these wheels
Clicky 1 Clicky 2 I think they look
fantastic
on thew coupe.
Looked at a few porche replica wheels but they all seem a little too wide, does anyone know of a narrow version of a prche replica wheel in an 18" ?
Posted By: Anonymous
Re: List of Wheels - 06/10/2006 19:42
given up already on the group buy mate
hold fire
for the porka reps to look good they need to be 5 stud.
Posted By: Jimbo
Re: List of Wheels - 06/10/2006 19:57
I hadn't given up on the group buy, everyone else had though
Im still looking to find a nice wheel though
Found
these that are the right width, just need to fing out about 5 stud to 4 stud conversion.
Posted By: JohnS
Re: List of Wheels - 06/10/2006 20:06
H&R do a 4x98 to 5x130 hub convertor.
I have some Porsche Cup 2 wheels on my old school VW Super Beetle cabrio
(also has Porsche 944 brakes!!)
All Porsche 911/944/968 front wheels will be the right offset more or less - they are ET53 or ET55 as standard and the usual convertors are 25mm AFAIK.
John
Posted By: Jimbo
Re: List of Wheels - 06/10/2006 21:00
Thanks John, I've just been looking at the H&R hub adaptors from
H&R at Performance Alloys they are the ones for the job but the price seems a little hight at Ģ170 per pair !!
Posted By: Anonymous
Re: List of Wheels - 06/10/2006 21:17
also i would still be a bit iffy having 20-25mm spacers on the car. thats alot of metal on the hub
Posted By: Per
Re: List of Wheels - 06/10/2006 21:21
Posted By: JohnS
Re: List of Wheels - 06/10/2006 21:48
You can get the Porsche carrera Cup III alloy(the ones you're looking at) replicas in 5x100 - you sometimes see them on golfs and new shape beetles. Not a very good replica though. 5x100 still means you'd need the Alfa hub conversion which is not cheap either.
I think Eibach also do adapters I believe. You can sometimes pick up the adapters from german ebay for a lot less as well.
The adapters bolt into the hub, and then the wheel bolts into the adapter so they are reasonably safe.
Posted By: strike4A
Re: List of Wheels - 06/10/2006 22:29
Quote:
I hadn't given up on the group buy, everyone else had though
Im still looking to find a nice wheel though
Found these that are the right width, just need to fing out about 5 stud to 4 stud conversion.
i'm with you on those porky wheels if it can be sorted. am trying to find out from these people if they can help.
Posted By: Jimbo
Re: List of Wheels - 11/10/2006 17:18
An update on the Porsche wheels, Elite can supply the spacers for Ģ250 for the 4, genuine Porsche wheels in a 7.5 x 18" for Ģ130 each and Toyo tyres.
The whole package comes in at Ģ1320 !
I just need to make sure these will fit, I cant see why not, they are the correct offset and they are designed to go on big caliper porsches, anyone know of any reason why they wont fit ?
Posted By: Anonymous
Re: List of Wheels - 17/12/2006 08:21
This is a great thread and helping alot with my choices
chris
Posted By: Jimbo
Re: List of Wheels - 17/12/2006 18:57
Lenso Evo II
18" fitted with a 10mm spacer on the front and an 8mm spacer on the rear. The rear didnt need a spacer but the increase in track can only help the handling
Clicky Clicky
Posted By: Anonymous
Re: List of Wheels - 18/12/2006 11:55
Jimbo, they look
you need to change your signature too
Posted By: Anonymous
Re: List of Wheels - 18/01/2007 15:01
An update on the Porsche wheels, Elite can supply the spacers for Ģ250 for the 4, genuine Porsche wheels in a 7.5 x 18" for Ģ130 each and Toyo tyres.
The whole package comes in at Ģ1320 !
I just need to make sure these will fit, I cant see why not, they are the correct offset and they are designed to go on big caliper porsches, anyone know of any reason why they wont fit ?
Most porsche wheels are about a 52ET, & 8/8.5" rim width
As you'll be converting from 4x98 to 5x130 if you them select the spacer/adaptor size right you'll fill the arches nicely and most importantly should clear the calipers with no issues.
Some of the corrado lads fit porsche rims as an option to clear the brembos they fit off the seat cupra r
chris
Posted By: Anonymous
Re: List of Wheels - 21/01/2007 20:34
Posted By: Anonymous
Re: List of Wheels - 25/01/2007 01:54
There was a set of Mille Miglia Action 17 in wheels for sale on ebay but they were sold before I bought my new coupe. The new owner confirms they fit without spacers on the front. The ET is 35 mm. I've tried loads of wheel suppliers (ones that have ET 35's) and all say have nothing to fit the 20VT. This getting a joke. I take it there is no guarentee that ET 35's will fit without spacers as I assume it will depend on the curvature of the spokes. Is this correct and with ET 35 or less is it a cert. they will fit.
Posted By: paddy
Re: List of Wheels - 25/01/2007 03:05
No, its not a cert - it depends on the design of the wheel. Its more likly a certain design will fit without spacers if the et is a lower number, but not a dead cert.
Posted By: Anonymous
Re: List of Wheels - 25/01/2007 05:39
could be because they aint got many 4x98mm pcd wheels and they also aint willing to guarantee they will fit over the 20vt bremvos so are playing it safe
Posted By: Jimbo
Re: List of Wheels - 25/01/2007 18:46
You can get 4x100 wheels re-pitched to the 4x98, costs about a tenner per wheel.
Posted By: Anonymous
Re: List of Wheels - 25/01/2007 23:40
So how is re-pitching the wheel done, I know it's only 1mm but!.Is it a better option than fitting wobbly bolts, there isn't much cost difference.
The wheel companies tried are mainly mail order so I can understand their reluctance to say they will fit. Problem is even the wheel manufactures web sites give little information, especially regarding the ET.
Posted By: Jimbo
Re: List of Wheels - 26/01/2007 01:19
The basically re-drill and counter sink the wheel bolt holes to give the correct spacing, its such a slight difference from 4x100 to 4x98 that you can hardly see it.
I think it may be a safer option than wobble bolts as your running a propper full sized bolt.
Posted By: Anonymous
Re: List of Wheels - 28/01/2007 21:54
Hello,
It seems that Binno B1 fit correctly on the Coupe, without spacers :
[img]http://www.binno.com.br/imagens/rodas/GRANDES/Binno_B930_HP_4.jpg[/img]
Binno B1 SizesI have found an other one, AWS Maranello :
[img]http://www.ityre.com/i/disks/1897.jpg[/img]
AWS Maranello SizesDoes somebody know these wheels ?
Posted By: Anonymous
Re: List of Wheels - 29/01/2007 02:15
After a little research I found that 9 wheels from Binno compagny could fit perfectly on the 20VT :
B930
B970
B980
B1000
B1030
B1040
S4600
S4900
S5600
Car affectation Binno Wheels Spanish site to buy the wheels (official dealer)
Posted By: Anonymous
Re: List of Wheels - 29/01/2007 02:33
Anyone bought these as looking at a refurb or new wheels and "em er wheels look dam fine"
Posted By: mattB
Re: List of Wheels - 29/01/2007 02:35
Do you know they will clear the brake calipers or are you just going off of the PCD and offset?
Posted By: Anonymous
Re: List of Wheels - 29/01/2007 03:04
mattB> I am sory but my english is not perfect and I don't understand exactly the meaning of your question.
Posted By: Anonymous
Re: List of Wheels - 29/01/2007 03:08
Have you actually managed to try these wheels on the Coupé or are you just going by charts?
Posted By: Anonymous
Re: List of Wheels - 29/01/2007 03:41
In fact I was to my shop and the buyer give a call to Binno Distributor.
In the catalog that my shop have there are only 3 models of Binno wheels and the distributor confirm that the B930 fit on the Coupe T20.
I was interesting by the b930 but after I gave a look to Binno site I think the others models fit too. I will go to my shop with the different models I've found and will ask him to call again the distributor.
I will keep you informed
Posted By: mattB
Re: List of Wheels - 29/01/2007 04:33
No problem. I was just curious as a lot of wheels it's difficult to know if they will actually fit without trying them on the car.
While the numbers for the wheel might be correct, that's not always the end of the story.
Posted By: Anonymous
Re: List of Wheels - 30/01/2007 03:59
MattB> My shop confirm that the B930 are real 4x98 7,5x17" ET30. I can not confirm for the other because they are not sold in France. I will buy them this week if I can have the "Hyper Silver" ("HP") finition.
But I really think that the list I gave to you is good. I have written a mail to Binno compagny for their confirmation. For the moment I don't have any answer.
If the wheels are good for the Coupé I will be great because there is choice and they are very cheap
Posted By: Anonymous
Re: List of Wheels - 30/01/2007 04:18
Good luck
Posted By: Anonymous
Re: List of Wheels - 30/01/2007 17:41
The Binno S4600 looks superb.
But 3 problems:
1. Although it will fit the 4x98 PCD and probably have the correct offset, I wonder whether it's actually been tested to fit over the Brembos' on the 20vt...
2.Importing wheels from Spain is surely going to be ĢĢĢĢ's
...
3. They appear to only go up to 17" size. So for us "used to 18 inches folk" that's no use...
Ah well. The search continues for a clean 6 spoke with the hub nuts covered.
Posted By: Anonymous
Re: List of Wheels - 01/02/2007 02:46
Best wheel style for the Coupe?
Maybe a stupid question but! 4 bolts and odd numbers of spokes, expecially 5, can look naff to me because of the asymmetry of the drillings. These could look ok on wheels with a deep dished hub centre. What about multispoke say 9 or more? What about those that have centre covers so as not show the wheel bolts? Are the covers just plastic and fine till they break when prising them off, or are my thoughts here non-founded. I don't like multifit types with masses of holes, think that may be what I have now or the other holes may just be dummy ones. Given the PCD, ET and even then they may not fit, any comments?
Posted By: Anonymous
Re: List of Wheels - 11/02/2007 14:41
Ordered these this friday, only 8 days of waiting now. offcours in the most male size of them all, 18''
http://www.garaget.org/?car=22938&image=361980They are called "Bellini Bella" and the color is HyperBlackSilver. And if that don't make grown men cry...
Comes with ET40 and 4x100. Just bolt on then. Will come back with more pics when they arrive.
Have a nice day.
Posted By: Jimbo
Re: List of Wheels - 11/02/2007 17:42
ET40 and you think they will bolt straight on !!!
Posted By: Anonymous
Re: List of Wheels - 11/02/2007 22:37
yeah 40 is std för 20VT
Posted By: Anonymous
Re: List of Wheels - 13/02/2007 03:31
4x100 aint tho
Posted By: Anonymous
Re: List of Wheels - 13/02/2007 03:56
And 4X100 ain't no problem with wobbly bolts
Posted By: Anonymous
Re: List of Wheels - 13/02/2007 07:25
Ordered these this friday, only 8 days of waiting now. offcours in the most male size of them all, 18''
http://www.garaget.org/?car=22938&image=361980They are called "Bellini Bella" and the color is HyperBlackSilver. And if that don't make grown men cry...
Comes with ET40 and 4x100. Just bolt on then. Will come back with more pics when they arrive.
Have a nice day.
You mean the ones on the yellow coop in the pictures? They look fantastic !
Posted By: Anonymous
Re: List of Wheels - 13/02/2007 12:00
Nope, if you klick the link it's the them on the big picture in the middle of the screen.
Posted By: Jimbo
Re: List of Wheels - 13/02/2007 14:47
yeah 40 is std för 20VT
However the wheels on a 20vt were designed to fit over the calipers, you still may need spacers to get these wheels to fit !
I've been there and done this already, it took me 3 trips to the wheel shop before we got the right sized spacer to fit my alloys on.
Worth it in the end though.
Posted By: Anonymous
Re: List of Wheels - 13/02/2007 15:16
No worries, Still got my 5mm spacers from the last set. Nothing impossible. 6days left
Btw, nice one...
Posted By: Anonymous
Re: List of Wheels - 15/02/2007 05:42
You can get 4x100 wheels re-pitched to the 4x98, costs about a tenner per wheel.
Is there a national company who can do this?
Posted By: Anonymous
Re: List of Wheels - 16/02/2007 13:12
please tell me the wheelcompany that actually make wheels with tolereances so small. one milimeter per hole is just so little. Then you have the tolerance on the hole itself (roundness). I've used 4x100 on 4x98 with normal skrews and never ever ever cracked a skrew or ever heard of anyone done this.
one milimeter is so small that it doesn't matter.
So re-pitche your 4x100 to 4x98 is just a waste of money and time.
Posted By: Anonymous
Re: List of Wheels - 16/02/2007 20:06
realy, imo 1 mm is a hell of a lot of difference when it comes to thread angle, and size etc, cross thread springs to mind immediately
Posted By: Anonymous
Re: List of Wheels - 16/02/2007 20:50
please tell me the wheelcompany that actually make wheels with tolereances so small. one milimeter per hole is just so little. Then you have the tolerance on the hole itself (roundness). I've used 4x100 on 4x98 with normal skrews and never ever ever cracked a skrew or ever heard of anyone done this.
one milimeter is so small that it doesn't matter.
So re-pitche your 4x100 to 4x98 is just a waste of money and time.
You can tell you're not an engineer! 1mm is a hell of lot! I've no doubt that you'd be able to fit 100mm pitched wheels on 98mm pitch hole pattern but you'd be introducing a lot of stress into the wheels and bolts.
You can bet the tolerance used when drilling the wheels or hubs is more like +/- 0.1mm.
Posted By: Anonymous
Re: List of Wheels - 18/02/2007 01:33
one milimeter is so small that it doesn't matter.
The bloke that had my coop before me said that
.
4 new hubs 16 new wheel bolts and I had to get the alloys re drilled so the bolt hols was round again . Lucky rog had a silver coop braking at the time so I got some of the hubs off that .
Posted By: Anonymous
Re: List of Wheels - 19/02/2007 03:23
So really no one knows exactly how much the tolerance can vary... Well I do agree that it should be +/-0.1mm. But we dont know, do we? Talkt to my mate who is an active streetracer who drives with 4x100...no problem there. My opinion is with wobbly bolts you're on the safe side and don't need to worry about the wheels comming of.
Posted By: Anonymous
Re: List of Wheels - 19/02/2007 03:36
I have a 20vt and wheels with 4x100 and wobbly bolts (and 3mm spacers in front) no problems what so ever with anything :-)
http://www.garaget.org/show_ext.php?car=23306&image=267867
Posted By: Per
Re: List of Wheels - 19/02/2007 21:14
Exactly, wobbly bolts is a completely different affair.
Std. bolts will actually bend
in a 100x4 wheel. Talk about stress. They may last a while but no doubt a bad thing.
Posted By: Anonymous
Re: List of Wheels - 20/02/2007 01:10
Smooth what make of alloys have you got - i like ? and are they 17's or 18's ?
Posted By: Anonymous
Re: List of Wheels - 21/02/2007 02:26
Sprintsteve: They are 18" and in your country I think "dare" has it and "icon" as well. It says "racing power" on mine.
Posted By: zak
Re: List of Wheels - 21/02/2007 03:34
Smooth, that's one nice coupe you've got there
It looks brand new!
Posted By: Anonymous
Re: List of Wheels - 21/02/2007 18:56
Thank you zak! I love my coupe so much and I take really good care of it :). Fiat actually had it as a show car (orginal) and It hasn't been driven that much, about 40000km
Posted By: Anonymous
Re: List of Wheels - 22/02/2007 23:25
Great thread, been paying mucho attention as I'm not keen on the huge arch gaps around the standard wheels. But whilst there are loads of examples of 17" or 18" wheels, there is very little mention of the actual tyre sizes fitted to them. Can you ladies and gents supply this info. too?
To keep the rolling radius the same you should get smaller sidewalled tyres, but this doesn't address the arch gap. So, are you custom lot rolling around with speedos reading too fast or too slow now? (but with nicely filled wheelarches).
A spot of cyberskiving the other day led me to this interesting link to calculate tyre sizes for different size rims.
http://www.miata.net/garage/tirecalc.htmlCheers.
Posted By: Anonymous
Re: List of Wheels - 22/02/2007 23:29
hello,
i'm french, sorry for my bad english.
I search this type of alloys during long long time :
18/8 Inch Dare V2 Hi Power Silver Alloy Wheels With 225/35/18 Tyres.
I see SmOOth have this beautiful alloy on his coupe...
PLEASE SmOOth tell where you found it because actually i don't find it anywhere in europe...
Thanks
Posted By: Anonymous
Re: List of Wheels - 23/02/2007 04:15
Hi pascal20vt
Thank you! That is exacly the setup I have. 18x8" with 225/35 tires.
I found them on many places in England but no one who had'em in stock wanted to ship outside UK
I almost gave up my search for them until I contacted this swedish wheel retailer
http://www.falgexperten.com. Im not sure they can help you because it is in Sweden but you should email them anyway
btw, I think Lenso (Japan) is the original manufactor of the wheels but im not sure.
Good luck
Posted By: Anonymous
Re: List of Wheels - 27/02/2007 20:52
Hi smooth,
I don't find the alloys on :
http://WWW.falgexpreten.com ????
But i confirm, the DARE V2 are the same that LENSO MUSE !!!
I found dealers but only in AUSTRALIA
Can you give me the dealers websites in your country because i'm going to be MAD if i can't buy them ....
If necessary i can come on train to london or other town to make the deal ....
other question : where find woolby bolt and have you pics of it ???
Posted By: Nigel
Re: List of Wheels - 28/02/2007 02:40
Does anyone know where to get Momo Sports from?
Its the twin 5-spoke design - I believe Steve^ had them on the ex-L&M LE
Looking for 18"
Posted By: cowboy
Re: List of Wheels - 28/02/2007 02:42
na no more mate,only get them some times on ebay but very rare,but they are stunning wheels
http://i53.photobucket.com/albums/g45/cowboykarl/patsphotos035.jpg
Posted By: Anonymous
Re: List of Wheels - 05/03/2007 03:49
pascal they only had the 17" on the website, i had to ask them for my 18". I suggest you do the same and ask them if they could get a set for you..
http://falgexperten.jetshop.se/they also have MSN so you can speak to them directly
falgexperten@hotmail.com
//Tompa
Posted By: Anonymous
Re: List of Wheels - 05/03/2007 04:09
Hello SmOOth for your help
I found my futur wheels : CESAM DAYTONA 7.5/18 in 4/100 Look exactly the same as yours...
In a shop near my house !!!
Posted By: OO7
Re: List of Wheels - 15/03/2007 02:56
Any one know if the Azev AS will fit, how much they cost and where I can find them. I've been trying google but can't find a price.
Posted By: mattB
Re: List of Wheels - 15/03/2007 03:00
I dont know if they'll fit, although I think they're possibly what CDek had fitted to his pearly white coupe. But then he doesn't mind wobblies and spacers... anyway, try these guys:
http://www.dtmotorsport.co.uk/
Posted By: Anonymous
Re: List of Wheels - 15/03/2007 19:16
I've just spent a while ploughing through this entire thread and from reading some of the comments I'm not entirely sure that some people are very clear about the whole business of offset.
At the risk of teaching those who do know about these things how to suck eggs here goes....
'offset' is the distance in mm between the mounting face of the wheel and the plane through the centre of the wheel. It has no bearing at all on whether your Brembos will fit behind any given type of wheel design. The only thing the offset will change is the track - reducing the offset effectively moves the tyres outwards increasing the track and vice versa - this is obviously going to have an influence on handling and could result in tyres rubbing somewhere if taken to extremes.
By fitting spacers to clear the Brembos you are effectively moving the mounting face closer to the centre plane and are thereby reducing the effective offset of the wheel. What this means is that you have to bear in mind the net result of offset and spacer width if you want to maintain the same track.
Example calc.
Assume std offset = 35mm
Your chosen wheel design requires a 5mm spacer to clear the Brembos.
So, you need to buy an ET40 fitment to retain the same track.
Similarly if you have already bought ET25 wheels and find you have to fit a 10mm spacer then you effectively have ET15 wheels which means you will increase your overall track by 40mm - flared wheelarch time
Posted By: Anonymous
Re: List of Wheels - 15/03/2007 23:17
yeah 40 is std för 20VT
However the wheels on a 20vt were designed to fit over the calipers, you still may need spacers to get these wheels to fit !
I've been there and done this already, it took me 3 trips to the wheel shop before we got the right sized spacer to fit my alloys on.
Worth it in the end though. I really liked the look of your wheels Jimbo :P... sooooo.. I went to the Lenso wheels website
http://www.lensowheels.co.uk Apparently, they produce wheels with the correct offset and as I don't have huge brembo callipers, direct fit for me.. and spacers for all you 20vt boys and girls...
btw... I like these
http://affilate.potn.com/images/lenso/imlenso2006_S73.jpg and quite fancy them for my coop... 18"... can I please invite opinions?
Posted By: Anonymous
Re: List of Wheels - 15/03/2007 23:22
They were the first ones a spotted on their and wondered what they'd be like on the coupe
Posted By: Anonymous
Re: List of Wheels - 16/03/2007 01:01
Of subject just a tad
Phoned an alloy place and was told the 17"lenso's would fit with a 15mm spacer
Phoned another about the same wheel and they said it wouldn't work.
Confused I am
Posted By: Jimbo
Re: List of Wheels - 16/03/2007 20:19
The only way to see what wheels will fit it to go and try them on the car.
Posted By: Anonymous
Re: List of Wheels - 16/03/2007 21:42
On the subject of alloy wheels, can anyone identify these beauties! I've got to have them for my 20VT
http://s56.photobucket.com/albums/g198/sandro_dg/
Posted By: Paul_V
Re: List of Wheels - 16/03/2007 22:03
they look suspiciously like a set of wolfrace wheels which halfrauds are stocking at the moment,could be wrong but they look very close
Posted By: Begbie
Re: List of Wheels - 16/03/2007 22:15
Oxign
Posted By: Anonymous
Re: List of Wheels - 16/03/2007 22:20
I agree. They look like Wolfrace Suzuka...but they're not quite right.
Posted By: Anonymous
Re: List of Wheels - 17/03/2007 01:05
Oxign? Is that a make?
Posted By: Anonymous
Re: List of Wheels - 17/03/2007 14:32
Posted By: Anonymous
Re: List of Wheels - 18/03/2007 00:06
how about these babys.
May not be worksafe due to surrounding images.
http://www.livevideo.com/video/landing/B...1&tx_category=1
Posted By: Anonymous
Re: List of Wheels - 22/03/2007 18:39
Posted By: Anonymous
Re: List of Wheels - 22/03/2007 21:13
Horrible
Posted By: Anonymous
Re: List of Wheels - 22/03/2007 21:16
lol panic those wheels are a bit mad!
Posted By: Anonymous
Re: List of Wheels - 23/03/2007 02:57
Definitive answers to these questions, if you know, please
Good thread but most of the wheels listed are no longer available and ones like the AZEV's are outside my budget.
Here is what I know, PCD 98 but can fit 100 with wobbly bolts
Here is what I am unsure of. Opinions vary as to the ET of the stock wheels some say 35 others 40
I also read that the spoke design is critical to clearing the brembos, even with an ET 35/40
So does that mean a safe bet would be ET 20/25 accepting that would increase? the track.
I would prefer a solution without spacers
What about the centre boss size, is this fairly universal
Posted By: cowboy
Re: List of Wheels - 23/03/2007 03:33
no you need shims on some wheels,to get the centre boss right,mine are momo sport and i had to get the right shims of them,this must be geting harder for you now lol
Posted By: Anonymous
Re: List of Wheels - 24/03/2007 04:42
Posted By: Anonymous
Re: List of Wheels - 25/03/2007 00:33
Anyone know about Canonica 17"s ???
Posted By: Anonymous
Re: List of Wheels - 25/03/2007 03:56
Any piccies of these from a slight distance - without the jack?
Posted By: Anonymous
Re: List of Wheels - 31/03/2007 22:14
I think my Canonicas will go on with 20mm spacers. Is it really such a terrible thing to have spacers on a nearly standard car - it's not like I have 320 bhp...?
V nice
look like the same wheels as smooth has but a different make. Where from
how mutch
bin looking around for this style but can only find 15"
Posted By: Anonymous
Re: List of Wheels - 31/03/2007 23:03
clicky on the link..
these fit lurvely
Posted By: Anonymous
Re: List of Wheels - 31/03/2007 23:43
pascal - where did you buy your new wheels ?
Posted By: Tartandude
Re: List of Wheels - 01/04/2007 00:12
Are
these the same ones? (in 17")
Posted By: Anonymous
Re: List of Wheels - 01/04/2007 01:42
Tartandude >> yes mine are the same but in 18" in hyper silver color
Posted By: Anonymous
Re: List of Wheels - 01/04/2007 03:51
I'm looking for some 17's to replace my aftermarket 16's on a 20VT and these CESAM wheels may be just what I have been after. My present wheels have 20 mm spacers on the front (increased track, I think?) and wobbly bolts on the back. So I
Posted By: Anonymous
Re: List of Wheels - 01/04/2007 13:55
any more pics of the whole car pascal ? and do i spy Koni suspension up front ?
Posted By: Jimbo
Re: List of Wheels - 02/04/2007 01:51
Koni only do an insert for the standard damper, what you spy there are some Bilsteins and what looks like a set of 16vt Eibach springs
Posted By: Per
Re: List of Wheels - 03/04/2007 19:58
Anybody know if these babies fit without spacers?
http://shophost.net/shop_n/catalog/produ...91f959f3b4c7a45..aaah heck I'm gonna order anyway!
Posted By: Anonymous
Re: List of Wheels - 03/04/2007 21:58
Looks nice Per. Multispoke always works
classic design!
Posted By: Anonymous
Re: List of Wheels - 05/04/2007 15:58
Does anyone know if dtmotorsport are still in business as I keep getting a message unable to complete call as dialed when I ring them? Thanks
Posted By: Anonymous
Re: List of Wheels - 05/04/2007 20:56
Does anyone know if dtmotorsport are still in business as I keep getting a message unable to complete call as dialed when I ring them? Thanks
Either email them on their link or try this nos;.02070334434 ask for john.
Posted By: Anonymous
Re: List of Wheels - 06/04/2007 22:11
Adding pictures of Coupes with each wheel attached.If you have any of the ones listed below please pm with a link. Preferably showing a nice side on view
All these wheels are listed to fit the 20VT with Brembo Calipers. Members with NA or 16V/16VT will have a greater choice as wont have clearance problems
What we have so far is:
PCD 98 17" Compomotive Mo's =
begbie 17" Azev C =
mattB 17" Azev E
17" Azev U
17" Azev LS
17" Team Dynamics Pro Race 1.2 ET25
17" Ronal LZ
17" Ronal R38 =
nelson 17" Ronal R39
17" Ronal R42
18" Azev C
18" Azev E
18" Azev M =
Bambam 18" Azev U
18" Azev FS
18" Azev LS
18" Dare V5 =
allystew PCD 100 Wobbly bolts required17" Dare V1
18" Wolfrace Urban Racers =
mburns 18" TSW Ribs =
Clark 18" MAK Sting ET35 =
JAX PCD 100 Wobbly bolts and spacers <img src="/forum/images/graemlins/shocked.gif" alt="" />
18" Kosei Titanium Racers
18" Wolfrace Twin-Blade ET35 3mm Spacers =
Hamster 18" OZ Superleggera 7mm Spacers
I must state that all these wheels I am listing are collectively from Forum members. I am purely doing this as a guide for fellow forum members.
I therefore can not be held responsible for any wrong info.
Just bumping this to the end of the thread where it's easier to find. Are these really the only options we know of? I can't seem to source any Dare V5s but the V2s look good. Will they fit in a 17 or 18??
Posted By: Anonymous
Re: List of Wheels - 07/04/2007 16:25
Also, does anyone have a picture of a coupe wearing the Team Dynamics Pro Race 1.2 mentioned above?
Finally (!) on paper, 17" Wolfrace Triad fit the coupe. Anyone know any different as I can get a new set from GKs in colchester with Nankang tyres, centre pieces and wobbly bolts (PCD 100) for Ģ499!!!
http://wolfrace-alloy-wheels.co.uk/wolfrace/content/view/120/136/
Posted By: Anonymous
Re: List of Wheels - 08/04/2007 00:59
Posted By: Anonymous
Re: List of Wheels - 08/04/2007 06:20
looks great, what tyres have you got om there mate? and what size are they?
Posted By: Anonymous
Re: List of Wheels - 08/04/2007 15:51
Hankoock vantus sport K104 in 225/35/18
Posted By: Anonymous
Re: List of Wheels - 08/04/2007 16:23
Just bumping this to the end of the thread where it's easier to find. Are these really the only options we know of? I can't seem to source any Dare V5s but the V2s look good. Will they fit in a 17 or 18??
To answer my own question, the Wolfrace Triads do NOT fit or even come close. Shame as they are quite an attractive wheel.
Posted By: Anonymous
Re: List of Wheels - 12/04/2007 14:38
Posted By: Anonymous
Re: List of Wheels - 05/05/2007 23:30
Posted By: OO7
Re: List of Wheels - 05/05/2007 23:35
Maybe in the boot
but unless you have an extra hole to put one of the FIVE bolts through you may have problems.
Posted By: Anonymous
Re: List of Wheels - 06/05/2007 00:14
[censored] is that engine new!?
Posted By: Anonymous
Re: List of Wheels - 07/05/2007 03:32
i still like the dare v5 best
Just bumping this to the end of the thread where it's easier to find. Are these really the only options we know of? I can't seem to source any Dare V5s but the V2s look good. Will they fit in a 17 or 18??
To answer my own question, the Wolfrace Triads do NOT fit or even come close. Shame as they are quite an attractive wheel.
oh FCCUK!!! hope ur wrong, i`m waiting for my triads to come
17s 100pcd 35 offset.
Why don`t they fit? they look identical to Hamsters
same manufacturer, same cast surely
thought they had just changed the name
may be for sale then..to a 16v/16vy coupe owners
Posted By: Anonymous
Re: List of Wheels - 21/05/2007 05:37
Circolo what is the offset or ET on the Dares? Looking very nice I want to upgrade to 18's.
BTW Graham your in for a hard time unless you get wheels made up like the Azev's. I was told my 17 x 7.5 with 30ET AWS Racing would fit with no spacers or wobblys but when they came they where a couple of mm out and wouldn't clear the Brembos so had to get spacers. Hub Centric spacers are fine its the wobblys that Im not so keen on.
AWS Racing on car pic of spacer im getting these wheels for my sprint blue
Posted By: Tartandude
Re: List of Wheels - 21/05/2007 12:39
CESam Daytona 17" with wobbly bolts
Clicky Clicky
Posted By: Anonymous
Re: List of Wheels - 21/05/2007 17:22
i've got my alloys mom m2s
Posted By: Anonymous
Re: List of Wheels - 24/05/2007 00:05
i bought some m2 alloys of rich wnn670@yahoo.com who said they were unmarked when two well need a refurb to bring them up to unmarked condition takes the piss when people con u ive already paid for them now
Posted By: Anonymous
Re: List of Wheels - 27/05/2007 00:51
Just bumping this to the end of the thread where it's easier to find. Are these really the only options we know of? I can't seem to source any Dare V5s but the V2s look good. Will they fit in a 17 or 18??
To answer my own question, the Wolfrace Triads do NOT fit or even come close. Shame as they are quite an attractive wheel.
oh FCCUK!!! hope ur wrong, i`m waiting for my triads to come
17s 100pcd 35 offset.
Why don`t they fit? they look identical to Hamsters
same manufacturer, same cast surely
thought they had just changed the name
may be for sale then..to a 16v/16vy coupe owners
right! cancled the triads and have found some dare V2s at the same price
should i stick to 35mm offset
will these fit
HELP PLEASE
Posted By: Anonymous
Re: List of Wheels - 07/06/2007 20:57
Hi custard
I just bought a set of OZ Records from
http://www.raceandroad.com, they are extremely helpful, talk to a chap named Byron.
My wheels were Ģ550 including spacers, which is handy as i was thinking of getting some to increase the track.
Many of the OZ wheels will fit the coupe with 20mm spacers.
Posted By: Anonymous
Re: List of Wheels - 07/06/2007 21:08
Akeme - did you manage to get 4x98's? Also are the spacers like the H&R Hubcentric ones with lips?
Posted By: Anonymous
Re: List of Wheels - 07/06/2007 21:13
No, wobbly bolts for me but i dont mind too much, i have had them on a few cars now and they seem fine, touch wood!
There are alot of OZ wheels with PCD 4x98 though, i think they have just brought a multi spoke which is a direct fit.
I was going to get some comp mos as begbie recommended but the wait time for delivery was over a month
plus they are very strong but are also very heavy in comparison to OZ's.
The Titanium Ultra Leggera is the wheel to get if cost does not matter, they only weight 6kgs each!
Posted By: Anonymous
Re: List of Wheels - 07/06/2007 21:30
O.Z Racing Goto the application list and it tells you the wheels that can fit the coupe from the OZ range, most would probably need spacers mind.
Thanks Akeme
i`l try them tomorrow.
Does any one actualy have Dare V2s on the coupe 20vt??????
I`m looking at 17s 100pdc 35 et ?????
Posted By: Begbie
Re: List of Wheels - 08/06/2007 02:35
I was going to get some comp mos as begbie recommended but the wait time for delivery was over a month
Ah, thats a bit gutting
Posted By: Anonymous
Re: List of Wheels - 13/06/2007 02:49
I've just emailed compomotive to ask which of their products would fit the 20VT.
Akeme - do you know if the spacers had lips on them?
Posted By: Anonymous
Re: List of Wheels - 14/06/2007 04:48
They do afaik, the ones i bought were for a stilo 20v.
Posted By: Anonymous
Re: List of Wheels - 16/06/2007 16:15
Does anyone have any photos of a coupe fitted with Azev 'C's ?
Posted By: Anonymous
Re: List of Wheels - 16/06/2007 22:03
Compomotive will make you a set of wheels for your car if your car is not listed,but at a price of course.
I got them to make me 8 of these lightweight MO 5 spokes (8 x 16,s) for my Alfa.
http://i3.photobucket.com/albums/y92/alfa147turbo/MVC-019qS.jpg
Posted By: mattB
Re: List of Wheels - 16/06/2007 22:18
Does anyone have any photos of a coupe fitted with Azev 'C's ?
Posted By: Anonymous
Re: List of Wheels - 16/06/2007 22:31
Yeah - I've found out that compomotives aren't cheap. 18" is Ģ250 a corner plus tyres..
Posted By: Anonymous
Re: List of Wheels - 16/06/2007 22:43
250 quid is cheap enough.
Posted By: Anonymous
Re: List of Wheels - 17/06/2007 21:51
Splendid. They look like the bad boys for me. Price ? ... Ball park figure without tyres ?
Posted By: Anonymous
Re: List of Wheels - 17/06/2007 21:57
Azevs Cs Ģ580 + Ģ25 delivery without tyres for 17'
Posted By: Anonymous
Re: List of Wheels - 18/06/2007 15:40
Thanks.
Posted By: Anonymous
Re: List of Wheels - 23/06/2007 17:57
Barracuda : Cuda GT4 8x18" (with 10mm spacers)
(picts will come soon)
Posted By: Anonymous
Re: List of Wheels - 24/06/2007 19:54
My TD Monza Suits PERFECT. No spacers. Just 4x100
NO wobbly bolts. So far so good. The wheel is there, nothing to worry about.
A beautiful wheel tho its cost me A fortune..
Pic will come..
Posted By: Anonymous
Re: List of Wheels - 03/07/2007 14:16
Re: Dare V2's
I love the look of these wheels, but I was told from the horse's mouth that you can't make V2's fit a coop. Boohoo!
Posted By: Anonymous
Re: List of Wheels - 03/07/2007 14:19
I'm looking for a direct fit 4x98 pcd 17" set of wheels, either 7.5 or 8 width, that doesn't make me look like King Chav: any ideas?
The Dare V5s fit the 20vt no problem, and look great. Which version of the coop do you have?
Posted By: Anonymous
Re: List of Wheels - 04/07/2007 12:09
It's a 20V turbo: somebody at Dare said the V2's are a definite no-no, and that the V5 in 18" will fit but I don't want to go for the rubber-band tyre look, and a 235/40 on a 17" rim is very close to 205/50 on a 16
Posted By: Anonymous
Re: List of Wheels - 05/07/2007 16:03
I have been categorically assured by the manufacturers that Team Dynamics Pro Race 1.2 will fit my coop 20vt in a 8x17 size, taking 235/40 tyres. They say they have fitted them in this size to a coop recently; is that anybody on here????
i have 17` dare v2s on my 20vt
20mm H&R hubcentric spacers convert from fiat-vw fitment so 98-100pdc so dont need wabble bolts just vw thread wheel nuts
Problem solved
Posted By: Anonymous
Re: List of Wheels - 06/08/2007 06:00
Anyone tried the OZ Crono HT sw matts? You can view them on the OZ website. They look really good I think - graphite or darker is becoming my preference.
Posted By: Anonymous
Re: List of Wheels - 07/08/2007 00:37
Just got the following reply from Motorworld:
The only wheels we are able to source that we know will clear the calipers are as follows:
Team Dynamics Drifz 17"
Team Dynamics Pro Race 1.2 17"
Team Dynamics Monza R 17"
I hope this is of interest to you, however, should you require any further information, please don't hesitate to contact our Mail Order department on 01274 805350.
[I did ask specifically for 17"]
Posted By: Anonymous
Re: List of Wheels - 17/08/2007 14:23
I have MAK Cruisers on my car. ET35, 18'', 4x100 pcd, requires wobbly bolts. They clear the brembos by 0,5-1mm
no spacers needed but may fit 2-3-4mm spacers, up to you
the list needs a little updating Graham
Posted By: Anonymous
Re: List of Wheels - 21/08/2007 03:46
I've now got a set of 8 x 17 Team Dynamics Pro Race 1.2 silver wheels in 4 x 98 pcd, fitted with 235-40 Goodyear Eagles. They fit perfectly and the tyres are just right for the rims. When the car is tidied up to my satisfaction I'll put some photos on
Posted By: Anonymous
Re: List of Wheels - 30/08/2007 23:42
Posted By: Anonymous
Re: List of Wheels - 30/08/2007 23:54
Im in love!!!!
WOW thats different
like the black in the bumper matches the wheels nice contrast
Posted By: Saci
Re: List of Wheels - 07/09/2007 12:10
Anyone got a picture of a coupe with Azev M's on
Posted By: Anonymous
Re: List of Wheels - 11/09/2007 00:01
Yes - Bambam. Should be in the list somewhere.
Posted By: Anonymous
Re: List of Wheels - 11/09/2007 03:35
Adncool.
lovely car & the wheels are rather tasty
Posted By: Genic
Re: List of Wheels - 26/09/2007 02:55
Hi, some one on here had OZ hydra's any one know who it was or have any info on them.thanks
Posted By: Anonymous
Re: List of Wheels - 02/10/2007 15:26
All these wheels are listed to fit the 20VT with Brembo Calipers. Members with NA or 16V/16VT will have a greater choice as wont have clearance problems
What we have so far is:
PCD 98 17" Compomotive Mo's =
begbie 17" Azev C =
mattB 17" Azev E
17" Azev U
17" Azev LS
17" Team Dynamics Pro Race 1.2 ET25
17" Ronal LZ
17" Ronal R38 =
nelson 17" Ronal R39
17" Ronal R42
18" Azev C
18" Azev E
18" Azev M =
Bambam 18" Azev U
18" Azev FS
18" Azev LS
18" Dare V5 =
allystew PCD 100 Wobbly bolts required17" Dare V1
18" Wolfrace Urban Racers =
mburns 18" TSW Ribs =
Clark 18" MAK Sting ET35 =
JAX PCD 100 Wobbly bolts and spacers <img src="/forum/images/graemlins/shocked.gif" alt="" />
18" Kosei Titanium Racers
18" Wolfrace Twin-Blade ET35 3mm Spacers =
Hamster 18" OZ Superleggera 7mm Spacers
I must state that all these wheels I am listing are collectively from Forum members. I am purely doing this as a guide for fellow forum members.
I therefore can not be held responsible for any wrong info.
Any chance of this list being updated?
Has anyone got the Wolfrace Triads or Dare V2's to fit?
Posted By: Anonymous
Re: List of Wheels - 02/10/2007 16:23
Has anyone got the Wolfrace Triads or Dare V2's to fit?
Search for Kevcrab in styling. They are not Dare but very similar/the same. Not sure they fit a 20vt though?
Posted By: Anonymous
Re: List of Wheels - 02/10/2007 16:26
Actually look at flying custards reply 14 posts up
Posted By: Anonymous
Re: List of Wheels - 02/10/2007 16:54
i have 17` dare v2s on my 20vt
20mm H&R hubcentric spacers convert from fiat-vw fitment so 98-100pdc so dont need wabble bolts just vw thread wheel nuts
Problem solved
Come again!?
Posted By: Anonymous
Re: List of Wheels - 06/10/2007 21:08
Here's mine
17" BK Racing 166
PCD 4x98
10mm spacers + longer bolts require (just the front)
http://i177.photobucket.com/albums/w231/HGT-2007/SP_A0238.jpg
Posted By: nick_d
Re: List of Wheels - 10/10/2007 23:48
What size wobbly bolts will i need for my new wheels,(whats standard length) they're 4x100 and they're hopefully going straight onto hub (no spacers)!!!
Nick..
Posted By: Anonymous
Re: List of Wheels - 15/11/2007 00:33
I use Fondmetal 9A's
17 x 7
98 x 4
ET 35 offset
10mm spacers
[url=
[img=http://img219.imageshack.us/img219/5205/mycoupeus0.th.jpg]][/url]
20v Turbo Plus - 36k
Posted By: Anonymous
Re: List of Wheels - 15/11/2007 15:32
I've got momo m2 17" on mine, need her lowering, sorry about dirty pic took it before cleaned her today
http://i100.photobucket.com/albums/m10/jrb1512/IMG_0539.jpg
Posted By: Anonymous
Re: List of Wheels - 15/11/2007 21:48
This thread is for direct fitment wheels only, if they need spacers they shouldn't be in the thread.
Posted By: Anonymous
Re: List of Wheels - 17/11/2007 18:57
As the name suggests. Just thought it would be nice if we could have a list of all after market wheels that will defiantly fit the Fiat Coupe 20VT.
What would be nice is if you could have the pcd of 98 standard fit along with size of wheel along with offset and the clearance from the Brembo`s. Any problems you`ve had etc.
Then have the after market pcd's of 100 with the same criteria above please.
Oh pictures would be fantastic if you have them
Reason I`ve asked this is because I`ve had so much trouble just finding ones that fit my car
cheers everyone
Shabba, this thread is
only entitled, "List of Wheels". Graham asks for definate fitment, not direct fitment,
Where does it say direct fitment?.
With 10mm spacers the Fondmetals are a direct fit. Graham asked for the problems you had when trying to fit wheels. I had a problem fitting the Fondmetals that 10mm spacers fixed. Just trying to give more input...
Posted By: Per
Re: List of Wheels - 22/11/2007 15:00
As I've been telling you for about a year or so..
These 18" fits without spacers, and they are 4x98mm..
http://shophost.net/shop_n/catalog/produ...91f959f3b4c7a45 Why not an update of the list?
Posted By: Anonymous
Re: List of Wheels - 22/11/2007 15:54
/\ i like those
Posted By: Anonymous
Re: List of Wheels - 07/01/2008 16:53
Hello everyone, please dont shoot me for saying this
even though everyone says about the avez fit straight off, not everyone likes them (i dont personally) even though some of your cars that have got them do look nice, if we all stuck to that we would all have them if we wanted aftermarket, Grahams post at the start is what i was after when i got my coupe 20vt, i thought the 16" were slightly to small in the arches.
I have seen so many 20vt's with nice alloys that are not in the lists and i always wonder how they are getting them to fit, it would be nice to know from some of the people that have got ones that have got spacers and hub centric parts aswell so we can see what wheels they have, i saw Gaz restalls car and spoke to him about his alloys which are kei force 10 lookalikes called kn raceline r10 and i really liked them alloys, but he said they have stopped making them (not sure if they have, heres the link).
http://www.motor-world.co.uk/show_prod.php?prod_id=12117I am still very undecided as whether to refurbish my standard alloys, or go for aftermarket, 4 new tyres and refurb costs about Ģ600ish, new set of alloys in 17" for that, what do you do????????
Hope noone hates me for writing that, i just wish Coupes had easier fitments, and more choice of alloys.
Posted By: Anonymous
Re: List of Wheels - 07/01/2008 18:18
Here are my wheels (17's momos M2 i think ) the previous owner put these on the car and it looks like there is no spacers on them.....
http://i123.photobucket.com/albums/o285/MattyRST/Fiatcoupe004.jpg I do like them but i may change them in the near future....
Posted By: Anonymous
Re: List of Wheels - 07/01/2008 21:22
17" Wolfrace Matrix shadow crome wheels fir straight on the 20VT with loads of caliper clearance and no wobble bolts. Look mean on the car too
Posted By: paddy
Re: List of Wheels - 08/01/2008 00:07
http://ddy.fotopic.net/p47693812.htmlETA Beta EB51 17" by 7"
4x98PCD, but need 15MM spacers to clear the brembo's. Think they would probably fit non brembo cars out the box.
Posted By: Anonymous
Re: List of Wheels - 27/01/2008 17:39
20v Turbo Plus with 17x7 Radius R3's, 20mm H and R spacers converting to 4x100 PCD.
20vt Plus
Posted By: Anonymous
Re: List of Wheels - 02/02/2008 15:53
My cup with orobica or21 17", italian rims and 10mm spacer.
http://www.garaget.org/?car=1330&image=516417
Posted By: Anonymous
Re: List of Wheels - 02/02/2008 19:46
Hey nice car macchina, very clean looking. The alloys look good.
Ive got Team Dynamic 1.2s on order 17s. Will get some pics in a few weeks.
Posted By: Anonymous
Re: List of Wheels - 04/02/2008 03:19
Tx Duffman, I just got the car back from a garage after some fix, had a small accident last year, but now its back i shape
Posted By: Per
Re: List of Wheels - 05/02/2008 14:33
Finally got this picture up, of the 18" Novitec N8 Fiat Stilo wheels on a swedish members car (not mine!).
http://sfk.ibk.se/depa/showfile.php?carpic_no=2282&type=pictureAs said, 4x98mm, no spacers.
Sold here:
http://novitec.netDon't be afraid of the germans, they wont kill you.
Posted By: Freddan72
Re: List of Wheels - 05/02/2008 15:54
Nice
But a f*cking nightmare to clean.
Posted By: Rask
Re: List of Wheels - 05/02/2008 17:17
But a f*cking nightmare to clean.
Toothbrush?
Posted By: Freddan72
Re: List of Wheels - 05/02/2008 23:47
After two rims you will be using acid to get off that damned brake dust
Posted By: Anonymous
Re: List of Wheels - 09/05/2008 15:33
I've tried to update this list to include all the suggested options.Anyone got any new ones to add??
PCD 98
17" Compomotive Mo's = begbie
17" Azev C = mattB
17" Azev E
17" Azev U
17" Azev LS
17" Team Dynamics Pro Race 1.2 ET25
Team Dynamics Drifz 17"
Team Dynamics Monza R 17"
17" Ronal LZ
17" Ronal R38 = nelson
17" Ronal R39
17" Ronal R42
17 Azev A/C/U/AS/LS
18" Azev C
18" Azev E
18" Azev M = Bambam
18" Azev U
18 Avez AS
18" Azev FS
18" Azev LS
18" Dare V5 = allystew
PCD 98 with spacers
17" BK Racing 166 10mm spacers + longer bolts require (just the front)
17 x 7 Fondmetal 9A's ET 35 10mm spacers
17" by 7" ETA Beta EB51 need 15MM spacers
PCD 100 Wobbly bolts required
17" Dare V1
17 CESam Daytona
18" Wolfrace Urban Racers = mburns
18" TSW Ribs = Clark
18" MAK Sting ET35 = JAX
18'', MAK Cruisers . ET35,
18 CESAM DAYTONA
PCD 100 Wobbly bolts and spacers <img src="/forum/images/graemlins/shocked.gif" alt="" />
18" Kosei Titanium Racers
18" Wolfrace Twin-Blade ET35 3mm Spacers = Hamster
18" OZ Superleggera 7mm Spacers
OTHER 17
momo m2 17"
NOVITEC Stilo wheel typ N8 7,5x18 ET35
17" Wolfrace Matrix shadow crome
17x7 Radius R3's, 20mm H and R spacers converting to 4x100 PCD.
17", orobica or21 italian rims and 10mm spacer.
17" Momo Fighters fit, but with spacers and wobbly bolts
17" Kahn RS-R's
17 Postert
OTHER 18
18 Barracuda : Cuda GT4 (with 10mm spacers)
18" Wheelmania Jades
18"x8j Wolfrace Twin-Blade ET35 PCD100 with wobbly
18" Lenso Evo II fitted with a 10mm spacer on the front and an 8mm spacer on the rear
18/8 Inch Dare V2 Hi Power Silver Alloy Wheels With 225/35/18 Tyres.
OTHER suggestions
OZ Supperleggeras
OZ Chrono Evolutions
OZ Records
19" Kahn RSVs
hp racing (or sold as motion alloys).
Binno compagny could fit perfectly on the 20VT :
B930,B970,B980,B1000,B1030,B1040,S4600,S4900,S5600
Posted By: Anonymous
Re: List of Wheels - 24/07/2008 19:35
Hi guys!
Which offset to theese wheels? ET35?
Need new wheels to the biggest italian car meet in scandinavia
Thanks!
Posted By: Mariusz
Re: List of Wheels - 25/07/2008 00:18
I bought OZ 35 Anniversary 17" 4x100 for my LE a few days ago.. Wobbly bolts and 15mm spacers required.
http://www.forum.fiatcoupe.pl/files/g2_121.jpghttp://www.forum.fiatcoupe.pl/files/oz1_567.jpg
Posted By: Anonymous
Re: List of Wheels - 17/08/2008 22:06
Here's my newish wheels Fox Racing R3s in 17" with 12mm spacers at the front and 4x98 pcd. Bought secondhand with tyres for 380!! Bargain!
http://www.boards.ie/vbulletin/attachment.php?attachmentid=61589&d=1219006608
Posted By: Welformed
Re: List of Wheels - 26/08/2008 11:49
I've tried to update this list to include all the suggested options.Anyone got any new ones to add??
PCD 98
17" Compomotive Mo's = begbie
17" Azev C = mattB
17" Azev E
17" Azev U
17" Azev LS
17" Team Dynamics Pro Race 1.2 ET25
Team Dynamics Drifz 17"
Team Dynamics Monza R 17"
17" Ronal LZ
17" Ronal R38 = nelson
17" Ronal R39
17" Ronal R42
17 Azev A/C/U/AS/LS
18" Azev C
18" Azev E
18" Azev M = Bambam
18" Azev U
18 Avez AS
18" Azev FS
18" Azev LS
18" Dare V5 = allystew
PCD 98 with spacers
17" BK Racing 166 10mm spacers + longer bolts require (just the front)
17 x 7 Fondmetal 9A's ET 35 10mm spacers
17" by 7" ETA Beta EB51 need 15MM spacers
PCD 100 Wobbly bolts required
17" Dare V1
17 CESam Daytona
18" Wolfrace Urban Racers = mburns
18" TSW Ribs = Clark
18" MAK Sting ET35 = JAX
18'', MAK Cruisers . ET35,
18 CESAM DAYTONA
PCD 100 Wobbly bolts and spacers <img src="/forum/images/graemlins/shocked.gif" alt="" />
18" Kosei Titanium Racers
18" Wolfrace Twin-Blade ET35 3mm Spacers = Hamster
18" OZ Superleggera 7mm Spacers
OTHER 17
momo m2 17"
NOVITEC Stilo wheel typ N8 7,5x18 ET35
17" Wolfrace Matrix shadow crome
17x7 Radius R3's, 20mm H and R spacers converting to 4x100 PCD.
17", orobica or21 italian rims and 10mm spacer.
17" Momo Fighters fit, but with spacers and wobbly bolts
17" Kahn RS-R's
17 Postert
OTHER 18
18 Barracuda : Cuda GT4 (with 10mm spacers)
18" Wheelmania Jades
18"x8j Wolfrace Twin-Blade ET35 PCD100 with wobbly
18" Lenso Evo II fitted with a 10mm spacer on the front and an 8mm spacer on the rear
18/8 Inch Dare V2 Hi Power Silver Alloy Wheels With 225/35/18 Tyres.
OTHER suggestions
OZ Supperleggeras
OZ Chrono Evolutions
OZ Records
19" Kahn RSVs
hp racing (or sold as motion alloys).
Binno compagny could fit perfectly on the 20VT :
B930,B970,B980,B1000,B1030,B1040,S4600,S4900,S5600
Why have 17" Azev A's disappeared from this list? I thought they were a straight PCD 98 ET35/30 fit?
Posted By: Anonymous
Re: List of Wheels - 31/08/2008 22:56
Does anyone have Compomotive Rally`s? I`d like to have a look on the coup with them.
Posted By: Per
Re: List of Wheels - 01/09/2008 17:58
Right, I'll sort this out for you lot.
PCD 98
17" Compomotive Mo's = begbie
17" Azev C = mattB
17" Azev E
17" Azev U
17" Azev LS
17" Team Dynamics Pro Race 1.2 ET25
Team Dynamics Drifz 17"
Team Dynamics Monza R 17"
17" Ronal LZ
17" Ronal R38 = nelson
17" Ronal R39
17" Ronal R42
17 Azev A/C/U/AS/LS
18" Azev C
18" Azev E
18" Azev M = Bambam
18" Azev U
18 Avez AS
18" Azev FS
18" Azev LS
18" Dare V5 = allystew
18" Novitec N8 (Stilo) 18x7,5 ET35
PCD 98 with spacers
17" BK Racing 166 10mm spacers + longer bolts require (just the front)
17 x 7 Fondmetal 9A's ET 35 10mm spacers
17" by 7" ETA Beta EB51 need 15MM spacers
PCD 100 Wobbly bolts required
17" Dare V1
17 CESam Daytona
18" Wolfrace Urban Racers = mburns
18" TSW Ribs = Clark
18" MAK Sting ET35 = JAX
18'', MAK Cruisers . ET35,
18 CESAM DAYTONA
PCD 100 Wobbly bolts and spacers <img src="/forum/images/graemlins/shocked.gif" alt="" />
18" Kosei Titanium Racers
18" Wolfrace Twin-Blade ET35 3mm Spacers = Hamster
18" OZ Superleggera 7mm Spacers
OTHER 17
momo m2 17"
17" Wolfrace Matrix shadow crome
17x7 Radius R3's, 20mm H and R spacers converting to 4x100 PCD.
17", orobica or21 italian rims and 10mm spacer.
17" Momo Fighters fit, but with spacers and wobbly bolts
17" Kahn RS-R's
17 Postert
OTHER 18
18 Barracuda : Cuda GT4 (with 10mm spacers)
18" Wheelmania Jades
18"x8j Wolfrace Twin-Blade ET35 PCD100 with wobbly
18" Lenso Evo II fitted with a 20mm spacer on the front and an 10mm spacer on the rear to keep the track similar.
18/8 Inch Dare V2 Hi Power Silver Alloy Wheels With 225/35/18 Tyres.
OTHER suggestions
OZ Supperleggeras
OZ Chrono Evolutions
OZ Records
19" Kahn RSVs
hp racing (or sold as motion alloys).
18x7.5" Liquidmetal Static PCD 4x100
Binno compagny could fit perfectly on the 20VT :
B930,B970,B980,B1000,B1030,B1040,S4600,S4900,S5600
Posted By: Anonymous
Re: List of Wheels - 01/09/2008 18:19
Iīm gonna use these:
http://s224.photobucket.com/albums/dd72/jq4tm/?action=view¤t=01092008509.jpgthey are Stilauto 17" x 7,5 " 4x98 et 35
hope those fit nicely... those were very cheap
Posted By: Anonymous
Re: List of Wheels - 01/09/2008 18:22
They dont make wolfrace urban racers any more, and I need a spare
Posted By: Anonymous
Re: List of Wheels - 12/01/2009 21:06
Adding pictures of Coupes with each wheel attached.If you have any of the ones listed below please pm with a link. Preferably showing a nice side on view
All these wheels are listed to fit the 20VT with Brembo Calipers. Members with NA or 16V/16VT will have a greater choice as wont have clearance problems
What we have so far is:
PCD 98 17" Compomotive Mo's =
begbie 17" Azev C =
mattB 17" Azev E
17" Azev U
17" Azev LS
17" Team Dynamics Pro Race 1.2 ET25
17" Ronal LZ
17" Ronal R38 =
nelson 17" Ronal R39
17" Ronal R42
18" Azev C
18" Azev E
18" Azev M =
Bambam 18" Azev U
18" Azev FS
18" Azev LS
18" Dare V5 =
allystew PCD 100 Wobbly bolts required17" Dare V1
18" Wolfrace Urban Racers =
mburns 18" TSW Ribs =
Clark 18" MAK Sting ET35 =
JAX PCD 100 Wobbly bolts and spacers <img src="/forum/images/graemlins/shocked.gif" alt="" />
18" Kosei Titanium Racers
18" Wolfrace Twin-Blade ET35 3mm Spacers =
Hamster 18" OZ Superleggera 7mm Spacers
I must state that all these wheels I am listing are collectively from Forum members. I am purely doing this as a guide for fellow forum members.
I therefore can not be held responsible for any wrong info.
Just bumping this to the end of the thread where it's easier to find. Are these really the only options we know of? I can't seem to source any Dare V5s but the V2s look good. Will they fit in a 17 or 18??
I've fitted TWS Revo 17x7" ET35 PCD 100 (wobbly bolt) on a Alfa 155 v6 with Brembo (4-pot brake caliper conversion).
No spacer needed, (added a 4mm thick spacer, to make the car look wider)
http://s416.photobucket.com/albums/pp241/bullettooth-tony/
Posted By: Anonymous
Re: List of Wheels - 08/03/2009 11:04
I have now Fitted Keskin KT7 17" ET35 with 45mm Wobble bolts and with
3014580 H & R Spacers 30mm (15mm per wheel) spacers.
Keskin KT7 just fitted http://www.keskin-tuning.de/Seiten/High/kt7.aspVuH 8.0x17 35.0 4 x 98.0 63.4 580 KT70817410035SW schwarz poliert
Posted By: RusH
Re: List of Wheels - 08/03/2009 11:10
Ismo - your car looks great! Any further pictures?
Posted By: Anonymous
Re: List of Wheels - 08/03/2009 11:17
Ismo - your car looks great! Any further pictures?
Hi
It is still
non starting project car , so only project pictures here:
http://s723.photobucket.com/albums/ww234/ismo67/So unfortunatelly I do not yet have any nice pictures.
Posted By: Anonymous
Re: List of Wheels - 08/03/2009 20:35
Posted By: Anonymous
Re: List of Wheels - 20/03/2009 11:15
Posted By: Anonymous
Re: List of Wheels - 20/03/2009 20:30
SSW Mesh 2 17" 7.5 go on as long as you use wobble bolts and a cheeky 20mm spacer on the front.
Mesh 2 To be honest could probably use smaller spacers but I wanted to use hubcentric to be on the safe side
Posted By: Anonymous
Re: List of Wheels - 20/03/2009 20:56
any pic's of them on the car tom ?
Posted By: Anonymous
Re: List of Wheels - 21/03/2009 21:11
Will take a picture tomorrow and post it
Posted By: Anonymous
Re: List of Wheels - 25/03/2009 18:03
A couple of hurried pics on the phone.
1 2 Hope they are ok
Posted By: Anonymous
Re: List of Wheels - 07/05/2009 17:37
Hello all,
Been lurking for a while and finally got a coupe a couple of weeks ago. Already spent plenty on it - thanks Mariusz again for all your help with the Zender Kit.
Anyway. To add to the List of wheels that can fit the Coupe, I have just fitted 17" Wolfrace Vixens with a 20mm hubcentric spacer and wobbly bolts. There ain't much clearance but nothing touches.
Cheers,
Sipey
Posted By: Per
Re: List of Wheels - 07/05/2009 19:35
Well ok this was the thread to post in.
Here's one more option for you 18"-lovers:
http://sfk.ibk.se/depa/showfile.php?carpic_no=2361&type=pictureand
http://sfk.ibk.se/depa/showfile.php?carpic_no=2360&type=pictureLiquidmetal Static 18x7.5" with PCD 4x100mm.
Wobbly bolts and hubcentric 8mm spacers.
Bought from:
www.discounttiredirect.com in the USA.
Best aftermarket wheels I've seen on a Coupe. And they are mine!!
Posted By: Anonymous
Re: List of Wheels - 08/05/2009 08:57
sorry for the somewhat off topic post, but can anyone share a light on
these alloys? from what type of Coupe are they? LE? Plus? oh...and...does the coupe cabrio really exists? this is the only picture i found with one...
Posted By: cowboy
Re: List of Wheels - 08/05/2009 11:47
there plus wheels,and no there are no cabrio coupes yet
Posted By: Kayjey
Re: List of Wheels - 08/05/2009 13:33
There's no cabrio (check out the shadow for a clue) and that interior is out of a Golf Cabrio.
I know because I still have the Photoshop source files from when I made it.
Posted By: Anonymous
Re: List of Wheels - 08/05/2009 15:41
aren't
these the plus wheels? those on the 'cabrio' are a bit different and i've seen them on other coupes, like
this one...and i like them better
aren't they the LE ones?
Posted By: Barmybob
Re: List of Wheels - 08/05/2009 15:51
Nope they are normal 20VT wheels
Posted By: Anonymous
Re: List of Wheels - 10/05/2009 11:39
where can i find bigger Wobbly bolts for 20mm spacers??
Posted By: Anonymous
Re: List of Wheels - 10/05/2009 11:57
Hi 20vtuga,
I purchased 20mm hubcentric spacers that you bolt to the hub, then you can use standard 28mm or 30mm woobly bolts to bolt the wheel to the spacer.
You can get 45mm and 50mm wobbly bolts but they are not TUV approved and I would not use them.
I would really advise against non hubcentirc spacers. If there is no spiggot or hub in situ to centre your wheels you will get vibraion at anything over 60mph and a lot of creaking and clonking noises from the wheels moving around on the bolts.
Posted By: Per
Re: List of Wheels - 10/05/2009 12:56
Bolts will also eventually shear and break, and you will loose a wheel or two.
Wheels are essential for roadholding and grip.
Posted By: Anonymous
Re: List of Wheels - 11/05/2009 00:47
in portugual it's very hard to find 4/98 wheels...
and 4/100 with et 35 also
Posted By: Anonymous
Re: List of Wheels - 11/05/2009 09:51
Use 4x100 wheels mate but make sure your purcahse hubcentric spacers that bolt to your hub then use 28mm/30mm wobbly bolts to bolt the wheel to the spacer. Make sure you use the correct torque settings.
I have, in my youth, used wobbly bolts on a cheap spacer that didn't allow the use of spiggots. The wheels lasted 2 days before they started creaking and knocking. At this point I took them for the very reason Per has stated above - the bolts would have sheared.
Posted By: Anonymous
Re: List of Wheels - 11/05/2009 09:55
Wheels are essential for roadholding and grip.
Superb, Per .... that made me laugh out loud in my office
Posted By: Anonymous
Re: List of Wheels - 11/05/2009 10:57
Wheels are essential for roadholding and grip.
Superb, Per .... that made me laugh out loud in my office
Snap
Posted By: Per
Re: List of Wheels - 11/05/2009 19:18
Posted By: Anonymous
Re: List of Wheels - 27/06/2009 08:10
Here's a couple more for you:
Momo 10s:
TSW eight spokes:
Borbet C:
Alessio Spyders:
Kei Racing Velocity:
Posted By: Anonymous
Re: List of Wheels - 17/02/2010 21:05
Bump.
This should be sticky...
Posted By: Anonymous
Re: List of Wheels - 26/04/2010 10:19
Hi Guys, I recently fitted 17" Team Dynamics 100+ Jets to my 2L 20v (Non-turbo). They look excellent, but the ride is very bumpy. Has anyone else experienced increased bumpyness with their 17" wheels, or am I the only one?!! I've tried to live with it, but sometimes it feels like driving a cart down a farm track. I'm seriously considering asking the place I got them if they'll buy them back and fit the same wheels , but the 15" version. (They don't come in 16", unfortunately).
Posted By: Anonymous
Re: List of Wheels - 26/04/2010 10:28
15's will look too small IMO. 17's will always be more bumpy - how stiff the sidewalls on the tyres and their profile is also a factor.
Posted By: Anonymous
Re: List of Wheels - 27/04/2010 12:00
The tyres are quite low profile, although I can't recall the actual size at the moment. I intend to have them put the 15" up against the car so I can get an idea first, but considering that the 15" wheels will only be 1" 'smaller' at the top and bottom, I'm hoping they might look ok. The originals are 15" and they don't look all that bad. I can always try 16" but I don't think alloy dealers really offer a 'try it for a week or so then bring it back if you're not happy' service, and 16" may well still be a bit harsh. I'm probably pushing my luck as it is hoping he'll buy the present ones back for a good amount, but I have to do something about the ride - my car's going to end up shaking itself to bits. Not to mention me!
They're ok on main roads, but I go to work and back across country using the back roads, so it's become quite annoying to say the least. A normal 'bump' in our MiTo feels like I've hit the Grand Canyon in the coupe!
I dread to think what the ride would be like with 18"s fitted! To be honest, I made the mistake of assuming that as long as the overall diameter remained the same to keep the speedo in check, the ride would be the same -I know now that the tyre size plays a big part in the ride comfort. DOH!!
Actually, before I go off changing wheels, would a change in tyre air pressure make a noticable difference to ride comfort? Can't remember the actual tyre size, but I have about 2" of side wall with a pressure of 38psi all round. Could I drop this, and if so, what's the lower limit? I assume that if I go too low, I'll just be bumping the rims down onto the inner tyre which can't be good?!
Posted By: Anonymous
Re: List of Wheels - 28/04/2010 08:08
I've had std. 225/45r16 and the ride was hard(er), but never crashy or near the limit of uncomfortable.
On 215/45r17 (a slightly bigger overall diameter, causes some rubbing on full lock) the ride is even better! (increased rolling radius and allmost the same sidewall height).
As MiTo is not popular for it's cushy ride, and You don't seem to mind that, I'd say You should get your coupe suspension checked...
Posted By: Anonymous
Re: List of Wheels - 30/04/2010 10:08
Hi, did as you suggested, and paid a visit to my mechanic, who had a look around, and declared the suspension ok, thankfully! Have gone back to Jet 100+ 15" with 205/50R/15, and the ride is back to normal. I probably over-emphasised the 'crashyness' (is that a proper word?) a little, but the ride did feel overly harsh. Probably noticed it more than usual, because of my constant use of very bumpy back roads through villages to and from work - and like I've had pointed out on more than one occassion, the coupe was designed to run on 15's.
So, problem solved...
Posted By: Anonymous
Re: List of Wheels - 02/05/2010 17:36
Ok, sorry if I misled You and caused additional expenses.. It's very difficult to comment on ride comfort; different people -different experiences, conditions and expectations.
Contemporary cars pursue the aggressive/sporty styling route - big rims, low profile wide tires - leading to unsettled ride, high grip at the expense of steering feel and progressive slip, ultimately fun, even at low speed driving.
Anyway, glad to hear You're again enjoying Your car!
Posted By: Anonymous
Re: List of Wheels - 06/05/2010 08:15
No problem - the car was in for a service anyway. It's more comfy now! (Pics on the 'Coupe pics page, if anyone's interested - but with the 17" rims!!)
Thanks,
Posted By: Anonymous
Re: List of Wheels - 07/12/2010 22:05
Sorry if it's been covered but what's the deal with fiat 500 alloys? I've managed to work out they are 4x98, would need a spacer up front, but anyone know the centre bore? My google search didn't get any confident answers. Please don't make me ask my local fiat franchise!
Posted By: Anonymous
Re: List of Wheels - 08/12/2010 08:52
Sorry if it's been covered but what's the deal with fiat 500 alloys? I've managed to work out they are 4x98, would need a spacer up front, but anyone know the centre bore? My google search didn't get any confident answers. Please don't make me ask my local fiat franchise!
Std. Fiat group pcd/bore is 4*98 - 59/59,1 mm
- used on contemporary 500, Bravo, Panda etc.
- used on out of production Tipo, Punto mk1, Bravo mk1, Alfa 145/146, Alfa 155, Lancia Delta/Dedra
Grande Punto / Punto Evo (and Alfa Mito) is mechanically linked to Opel/Vauxhall Corsa, so uses 4x100 - 60mm central bore
large cars (new Croma) /commercial vans (Scudo) use 5*108 or 5*110 - 65,5 or 70mm c.bore
Posted By: Anonymous
Re: List of Wheels - 08/12/2010 20:55
Cool thanks Marko. Anyone tried / using 500 alloys? Thought I saw a coupe on some a while ago?
Posted By: Rask
Re: List of Wheels - 09/12/2010 10:14
Sorry if it's been covered but what's the deal with fiat 500 alloys? I've managed to work out they are 4x98, would need a spacer up front, but anyone know the centre bore? My google search didn't get any confident answers. Please don't make me ask my local fiat franchise!
Std. Fiat group pcd/bore is 4*98 - 59/59,1 mm
- used on contemporary 500, Bravo, Panda etc.
- used on out of production Tipo, Punto mk1, Bravo mk1, Alfa 145/146, Alfa 155, Lancia Delta/Dedra
Grande Punto / Punto Evo (and Alfa Mito) is mechanically linked to Opel/Vauxhall Corsa, so uses 4x100 - 60mm central bore
large cars (new Croma) /commercial vans (Scudo) use 5*108 or 5*110 - 65,5 or 70mm c.bore
Have been considering the Grande Punto Abarth wheels, would the difference in center bore make it impossible to fit on an QP with woobly bolts?
Posted By: Anonymous
Re: List of Wheels - 09/12/2010 12:03
Have been considering the Grande Punto Abarth wheels, would the difference in center bore make it impossible to fit on an QP with woobly bolts?
Make sure You get the spigot rings!!!
The wheel centering ring (coming from the hub) takes most of the load, the bolts just hold the wheel close and take some load due to metal to metal friction; they are not ment to take the whole load by shear stress.
Posted By: Per
Re: List of Wheels - 09/12/2010 22:01
And there are similar Bravo (new) wheels up to 18" which has the right PCD, 4x98mm.
Posted By: deannn_20VT
Re: List of Wheels - 18/04/2013 22:39
Are Team Dynamics Pro Race 1.2 16" with ET20 a good fit or will they be foul something. I will be looking to buy either 205/50 or 225/45 tyres for them. Any thoughts?
Posted By: Jimbo
Re: List of Wheels - 19/04/2013 00:13
I would personally go for the 17"s over the 16"s, they look nicer and improve on the handling slightly.
ET20 may be a bit too much though, wont they sit proud of the wheel arch? I think ET 25 is about right for these wheels.
Posted By: deannn_20VT
Re: List of Wheels - 19/04/2013 08:14
I got 17's but where I am moving the roads are a poo and I need bigger taller profile tyres hence looking to downsize. However, I also thought that et20 may be a bit too low. Never mind.
Posted By: Anonymous
Re: List of Wheels - 15/05/2013 20:19
Hi ! The pinto evo Amarth wheels ,17 ,et 39 , 4/100 will be good for 16 vt coupe ? Thank you , mark
Posted By: Anonymous
Re: List of Wheels - 15/05/2013 21:07
Sorry,for the mistake ! Fiat punto Abarth and not pinto Amarth ....
Posted By: Anonymous
Re: List of Wheels - 18/05/2013 20:10
please help !
Hi, does anybody know if the 17*7 ,4*100 abarth punto evo fit on the 16vt ok i really like this wheels , the ofset is 39.
thank you 'mark
Posted By: deannn_20VT
Re: List of Wheels - 19/05/2013 11:49
They will fit on 16VT's. The offset is fine thou you will need variable PCD bolts due to 4x100 stud pattern.
Posted By: Anonymous
Re: List of Wheels - 19/05/2013 20:47
thank you !!!!
Posted By: Anonymous
Re: List of Wheels - 24/10/2013 11:09
Great thread, given me plenty to think about!
I'm partial to a 5 spoke, twin 5 spoke, or a twin 6 so far, we shall see when the 20vt arrives
Posted By: Anonymous
Re: List of Wheels - 06/01/2014 18:32
Can't you get azev A's in 18"?
Posted By: deannn_20VT
Re: List of Wheels - 05/10/2016 20:43
Speedline Corse SL2 Marmora (Ronal) 17x7.5 ET35 4x100. Wobbly bolts plus spigot rings and they fit just right.
