Well the cam cover I stripped with paint stripper & resprayed with engine paint (no primer required) - got this off Ebay
As for cleaning I used (spray) engine cleaner, wet rags and a 3" brush - not too much chucking water about though !
Autoglym rubber care is very good for the black plastic /rubber bits & I finshed it off with loads of interior (silicon) spray to get a good shine.
Posted By: Anonymous
Re: Under-bonnet tart-up - 08/07/200816:36
Autoglym engine cleaner is what I use. Very easy to use and remove and great results.
Posted By: Anonymous
Re: Under-bonnet tart-up - 08/07/200822:10
Fook me thats clean, you should get a new coolant header tank from Fiat and get some lovely red coolant in it. Thats what I did, the tank was only about 20 quid IIRC and came in a couple of days.