Fiat Coupe Club UK
Kappa inlet on german Ebay
Posted By: Anonymous
Kappa inlet on german Ebay - 11/07/2012 16:28
Just purchased one for myself so this is todays "present for self" tip
Clickedydoodah
Posted By: Anonymous
Re: Kappa inlet on german Ebay - 11/07/2012 17:22
Wow i love it
What is it though?
Posted By: Begbie
Re: Kappa inlet on german Ebay - 11/07/2012 17:38
What does it look like Proccy?
No?
It's not food
It's an inlet manifold
Posted By: Anonymous
Re: Kappa inlet on german Ebay - 11/07/2012 19:06
^^^^^^ laughing so hard it hurts!!!! ^^^^^^
Well done Begbie.
Well done.
If you come ace tomorrow, I will reward your best comment of 2012!!!
Brilliant!!!!
Posted By: deannn_20VT
Re: Kappa inlet on german Ebay - 11/07/2012 23:50
What difference it's going to make and is it straight forward DIY job?
Posted By: Anonymous
Re: Kappa inlet on german Ebay - 12/07/2012 06:47
Its the best flowing factory inlet for the turbo versions of the Lampredi Twincam, and outflows a standard head a fair bit with some minor porting.
Its suposed to be bolt on with some minor grinding,
Posted By: Anonymous
Re: Kappa inlet on german Ebay - 12/07/2012 06:54
It is not bolt on - take some cutting&welding, be prepared
Posted By: Anonymous
Re: Kappa inlet on german Ebay - 12/07/2012 07:17
what exactly needs to be welded?
Posted By: Anonymous
Re: Kappa inlet on german Ebay - 12/07/2012 08:59
Injectors catch on the lugs that the standard manifold braces are bolted to. Nice manifold though lacking a bit in internal sizes. The measured airflow is pretty good though the standard necks can be ported to beat it by a long way.
Posted By: Anonymous
Re: Kappa inlet on german Ebay - 12/07/2012 10:48
Thats what ive heard, need to grind down the lugs.
Cant see where i need welding though?
Posted By: Honza
Re: Kappa inlet on german Ebay - 12/07/2012 19:04
for 300e?
toooooo expensive...:)
I have purchased one years ago for 50e, and few weeks ago whole kappa engine for 200e:) (and of course 2 engines from thema VIS with very simmilar intake manifold for 100e these engines are here for almost everybody recognized like scrap metal...)
Posted By: Anonymous
Re: Kappa inlet on german Ebay - 13/07/2012 06:20
No Lampredi engine is scrap metal Honza
I paid 110 for mine, think thats a good deal.
The one in the link is new in box with all sensors injectors etc.
Posted By: Anonymous
Re: Kappa inlet on german Ebay - 13/07/2012 07:56
what exactly needs to be welded?
+ cut two peaces on cilindar head where injector rail is held on coupe because on kappa rail is held on manifold, position of MAP sensor, coils, angle on induction pipe, position for idle control and position for acceleration cable needs to be modified
Posted By: Anonymous
Re: Kappa inlet on german Ebay - 13/07/2012 08:14
i noticed that GOZZOLI in Italy makes an uprated inlet
that allow four throttle bodies
Posted By: Begbie
Re: Kappa inlet on german Ebay - 13/07/2012 08:19
i noticed that GOZZOLI in Italy makes an uprated inlet
that allow four throttle bodies
Not the easiest of sites to browse, but do you mean this?
Posted By: Anonymous
Re: Kappa inlet on german Ebay - 13/07/2012 09:07
That looks very similar to a manifold I have, mine has Guy Croft branding cast into it.
Posted By: Anonymous
Re: Kappa inlet on german Ebay - 13/07/2012 10:18
i noticed that GOZZOLI in Italy makes an uprated inlet
that allow four throttle bodies
Not the easiest of sites to browse, but do you mean this?
yes this is for single throttle body
Posted By: Anonymous
Re: Kappa inlet on german Ebay - 13/07/2012 14:11
what exactly needs to be welded?
+ cut two peaces on cilindar head where injector rail is held on coupe because on kappa rail is held on manifold, position of MAP sensor, coils, angle on induction pipe,
position for idle control and position for acceleration cable needs to be modified
Ok, ill be moving the battery in the trunk and will be relocating the other bits so i think
ill be ok. Did you get any meassurements on performance vs the coupe one?
Did you port yours?
Posted By: Anonymous
Re: Kappa inlet on german Ebay - 16/07/2012 23:40
Is that you Erik ?
Has your clyinder head had any work done to improve it, you havent said ?
Posted By: Anonymous
Re: Kappa inlet on german Ebay - 17/07/2012 18:11
not sure about performance because after IC, tubular exhaust and kapa inlet car is not properly mapped yet
Posted By: Anonymous
Re: Kappa inlet on german Ebay - 18/07/2012 20:31
That looks very similar to a manifold I have, mine has Guy Croft branding cast into it.
a similar way to make power
Posted By: Anonymous
Re: Kappa inlet on german Ebay - 18/07/2012 22:03
Posted By: Anonymous
Re: Kappa inlet on german Ebay - 18/07/2012 22:08
Posted By: Anonymous
Re: Kappa inlet on german Ebay - 18/07/2012 22:10
That looks great 1NRO
Posted By: Anonymous
Re: Kappa inlet on german Ebay - 19/07/2012 20:47
Amazing even, the attention on detail hmmm.
Nice nice nice!
Posted By: kj16v
Re: Kappa inlet on german Ebay - 20/07/2012 09:41
KJ LIKES THIS!
8 injectors, eh? Has this manifold been used 'in anger' yet, so to speak?
Posted By: Anonymous
Re: Kappa inlet on german Ebay - 20/07/2012 10:27
Thanks :-)
No data reported back, yet. There's a few out there so at some stage I'll hear.