Posted By: bojke
Exhaust manifold - 30/06/2013 09:00
I am going to change my original exhaust manifold and GT2871 for GTX3076.What do you think about this manifold?Anyone used it?Any experience?
http://store.trwperformance.com/product_info.php?cPath=5_97&products_id=220
Posted By: Anonymous
Re: Exhaust manifold - 01/07/2013 07:21
Hi,
Look into this one as well, plenty of high power 20VT running on the standard exhaust manifold.
SPA Turbo Manifold I shipped this direct from Brazil for USD229.00 incl. shipping.
This will accommodate external waste gate.
Cheers,
Matt
Posted By: Anonymous
Re: Exhaust manifold - 01/07/2013 07:41
That looks very nice, great find!
My manifold is cracked too...
what about these ? any experience anyone ?
http://www.ebay.co.uk/itm/Fiat-coupe-20v...=item565827af15Jochen
Posted By: Anonymous
Re: Exhaust manifold - 03/07/2013 08:00
there have been some horror stories about these manifolds so i wouldn't touch these ones on ebay .
Posted By: Anonymous
Re: Exhaust manifold - 04/07/2013 17:44
in all fairness, i been lookin an lookin for a tubular manifold an while lookin i found the ebay item. i asked abt warrenty an it comes with a year, he was good when i said abt an extended warrenty, he can personnally say there good for 5 years, after that he's not sure, but at that price, 5 years i think is good. only problem is..... why would you unless adding more than 450bhp (???)
Posted By: bojke
Re: Exhaust manifold - 04/07/2013 18:41
Well,my plan is 500 bhp.Now I have GT2871 ,but I want to go for GTX3076 which is able to make that kind of power without problems.I must change exhaust manifold because GTX has T3 flange.
Posted By: Anonymous
Re: Exhaust manifold - 06/07/2013 10:27
You get flange adapters you know...
This builds less than an inch, you get adapters with smoother transitions but offcourse they build more...
As a sidenote i wouldnt go with a gtx 3076
Decide where you wanna go and choose between gtx3071 or gtx3576
The 76compressor is to big for the gt30
Posted By: Nigel
Re: Exhaust manifold - 06/07/2013 16:37
GTX3071 will give 500bhp with a 0.86AR turbine housing - mine isn't far off with a 0.64AR housing
Posted By: bojke
Re: Exhaust manifold - 06/07/2013 17:12
What about GTX 3582?Is it too big for 2.0?
Posted By: Anonymous
Re: Exhaust manifold - 07/07/2013 05:53
Nismo is selling what your after - manifold, turbo and external waste gate!
Posted By: bojke
Re: Exhaust manifold - 07/07/2013 06:20
Well that turbo has similar limit as mine. I want bigger one because maybe I am going to switch to 2.4.
Posted By: Stichl
Re: Exhaust manifold - 07/07/2013 07:08
GTX3576R meanwhile is first choice in USA at cars >600HP <650HP
As Brickfoot told - the GTX3076R suffers from the same problem like my old GT3082R. The exhaust side is too small for power Region >600HP...
New GTX3576R matches better from compressor too turbine.
Spool is about the same (small Advantage from GTX3076R) with much better top end power from GTX3576R
GTX3582R looses about 500rpm spool, advantage is a power output up to ~750HP
Juergen
Posted By: Anonymous
Re: Exhaust manifold - 11/07/2013 19:16
Dont spec your turbo based upon "what you might have" later.
If considering 2,4 conversions etc, the price of a turbo is pocket change as they are wery sellable second hand. Pick a turbo that goes well with where you are now, a turbo too big is way worse than one too small.
Exhaust housing for a 2,4 needs to be way bigger than on a 2,0 wich will move your boost treshold way up north, giving you a powerband from 5000 to 7000 wich isnt much fun.