Fiat Coupe Club UK

Forged 16vt

Posted By: Burbum123

Forged 16vt - 25/02/2021 17:06

Well I’m going to get my engine forged with joe soon , crank , pistons , rings , ect what else to I need before engine goes back in obviously upgraded clutch what about injectors ? And fuel pressure regulator , will I need to upgrade turbo ?

Thankyou
Posted By: Countrycruising

Re: Forged 16vt - 26/02/2021 09:10

Don't forget to add a Quaife diff to the list so bring the box with the engine wink
Posted By: Begbie

Re: Forged 16vt - 26/02/2021 11:53

Originally Posted by Countrycruising
Don't forget to add a Quaife diff to the list so bring the box with the engine wink

Shameful up selling there Joe laugh

If you are going forged, are you going to up the power or stay the same? If you want more power, then you are going to need bigger turbo, FMIC, cams, different head gasket, larger injectors, different exhaust manifold, larger downpipe / exhaust. Fuel pressure reg. would go to a 3bar one, so take one from a 20vt
Posted By: Burbum123

Re: Forged 16vt - 26/02/2021 16:11

Hi Bergie I’m aiming for 350ish which should be nice . .

Yes I’ll get manifold fmic ect I’m unsure on turbo and injector situation .

I don’t think I’ll have funds for everthing this year I just don’t want to be doing stuff twice.
Posted By: Countrycruising

Re: Forged 16vt - 26/02/2021 16:30

Originally Posted by Begbie
Originally Posted by Countrycruising
Don't forget to add a Quaife diff to the list so bring the box with the engine wink

Shameful up selling there Joe laugh


Just protecting his planetary gears laugh
Posted By: Honza

Re: Forged 16vt - 27/02/2021 19:48

Wider cambelt kit and balance shaft delete... these should be first... maybe new oilsprays (if old Are leaking below 1.2-1.5bar) ..
Posted By: Burbum123

Re: Forged 16vt - 28/02/2021 16:16

Balance shaft delete already being done mate .
Posted By: Begbie

Re: Forged 16vt - 01/03/2021 09:57

Originally Posted by Burbum123
Hi Bergie I’m aiming for 350ish which should be nice . .

Yes I’ll get manifold fmic ect I’m unsure on turbo and injector situation .

I don’t think I’ll have funds for everthing this year I just don’t want to be doing stuff twice.

I'm out of date on the turbo's available now, so unable to comment on that. Injectors you would probably want to look around the 600-750cc for them, but you will need to do research into this and how much head room you want, but ideally you do not want to be maxing out the injectors at your power level. You will also need to consider if you keep the standard ECU, who will remap it as the injectors will need to be fitted when being mapped.
Posted By: Burbum123

Re: Forged 16vt - 01/03/2021 19:45

Thanks Bergie I’ll take it to flea no better man I don’t think .
Posted By: Burbum123

Re: Forged 16vt - 01/03/2021 20:43

Do you still have your 16vt bergie ?
Posted By: Begbie

Re: Forged 16vt - 02/03/2021 09:39

Yes, still got the coupe, just not been used in a few years and it's Begbie, not Bergie smile
Posted By: DaveG

Re: Forged 16vt - 02/03/2021 12:01

I like Bergie laugh
Posted By: Burbum123

Re: Forged 16vt - 02/03/2021 13:49

Ooops I was convinced after all these years it was that sorry .
© 2024 Fiat Coupe Club UK