Posted By: Anonymous
time to change induction? - 28/03/2006 05:32
my k&n has seen better days so now i need a new cone for my straight induction mod what other good filters are out there green cotten do 1 for our car anygood? cheers guys
time to change induction?
Posted By: pinin_prestatyn
Re: time to change induction? - 28/03/2006 05:37
I think pipercross are what everyone goes for with the straight induction mod. You can clean your K+N you know 
and with the cash saved you can buy some sweets and bongo mags.
and with the cash saved you can buy some sweets and bongo mags.
Posted By: Anonymous
Re: time to change induction? - 28/03/2006 05:42
I bought a piperx off ebay for about £15
Its meant for a fiesta Zetec really but a bit of silicone adaptation and she will fit fine
I would soak the K&N in parafin overnight or if you can use the shower in your bathroom, soak it in fairy liquid or spray the fiary stuff onto it, give it a few mines to soak in, get an old scrubbing brush, scrub it then wash it out and then when dry give it a light spray with WD40 to oil it and make it last a bit longer
Its meant for a fiesta Zetec really but a bit of silicone adaptation and she will fit fine
I would soak the K&N in parafin overnight or if you can use the shower in your bathroom, soak it in fairy liquid or spray the fiary stuff onto it, give it a few mines to soak in, get an old scrubbing brush, scrub it then wash it out and then when dry give it a light spray with WD40 to oil it and make it last a bit longer
Posted By: Anonymous
Re: time to change induction? - 28/03/2006 05:42
The apexi units are meant to be amoung the best for filtration and performace to be honest.
Posted By: Saint
Re: time to change induction? - 28/03/2006 06:02
Posted By: Anonymous
Re: time to change induction? - 28/03/2006 07:11
Quote:
I think pipercross are what everyone goes for with the straight induction mod. You can clean your K+N you know
you are a true hero!
Posted By: Anonymous
Re: time to change induction? - 28/03/2006 11:09
can I ask what are Bongo Mags ?
do they have pics of ladies in various states of undress and
in compromised positions , perhaps ?
hehe.
do they have pics of ladies in various states of undress and
in compromised positions , perhaps ?
hehe.
Posted By: Anonymous
Re: time to change induction? - 28/03/2006 11:50
Good lord no, this is a family forum !! I believe Mr Pinin is a keen fan of the percussion instrument displayed here (work safe).
Or am I being naive ?
Or am I being naive ?
Posted By: Anonymous
Re: time to change induction? - 28/03/2006 12:23
Or you could buy a cheap OE filter in a sensible size. For example old Saab 900 T16S filters, quite big, paper so filtration must be good and cheap. Or some filter off most small trucks, those are usually big (large filter area), yet cheap.
Posted By: Anonymous
Re: time to change induction? - 28/03/2006 14:00
Quote:
I would soak the K&N in parafin overnight or if you can use the shower in your bathroom, soak it in fairy liquid or spray the fiary stuff onto it, give it a few mines to soak in, get an old scrubbing brush, scrub it then wash it out and then when dry give it a light spray with WD40 to oil it and make it last a bit longer
Or you could buy the proper recharge kit for a tenner, works really well.
Posted By: pinin_prestatyn
Re: time to change induction? - 28/03/2006 14:10
Quote:
can I ask what are Bongo Mags ?
do they have pics of ladies in various states of undress and
in compromised positions , perhaps ?
hehe.
Although I've personally never seen one, I believe you are correct. rhythm pamphlets.
Posted By: Anonymous
Re: time to change induction? - 28/03/2006 14:29
wakakakakaak
Posted By: Anonymous
Re: time to change induction? - 28/03/2006 18:47
Quote:
I think pipercross are what everyone goes for with the straight induction mod. You can clean your K+N you know
Most people tend to go for Ram air actually as far as I know. I also know that Ross (not sure of his 100% correct forum name had a ram air fall apart on his straight induction + threw a nice bit of structural metal into his turbo - no prizes for guessing what happened to the turbo.
Posted By: Trappy
Re: time to change induction? - 28/03/2006 18:57
Quote:
Or you could buy the proper recharge kit for a tenner, works really well.
Yup I bought this at the same time as the filter charger. Used it 3 times now and it works a treat. You get cleaner spray that somehow draws tonnes of s**t out of the filter and a bottle of red oil to spray onto it after. Looks brand new each time
Posted By: pinin_prestatyn
Re: time to change induction? - 28/03/2006 20:11
I meant ramair Actually sube 
the foam filter.
the foam filter.
Posted By: Anonymous
Re: time to change induction? - 28/03/2006 20:14
Pipercross are also foam.... 
Posted By: pinin_prestatyn
Re: time to change induction? - 28/03/2006 20:55
Ah p*ss off
I remember the day I sent you a drilled airbox, back in the day. Now look at you, you think you're ruddy "Tourqueitalia" or summat
I remember the day I sent you a drilled airbox, back in the day. Now look at you, you think you're ruddy "Tourqueitalia" or summat
Posted By: Anonymous
Re: time to change induction? - 28/03/2006 21:23
should never have bought that chip off graham a few years ago... 
Posted By: Anonymous
Re: time to change induction? - 29/03/2006 00:20
I have the Green cotton filter, with the rubber base you can attach it straight to the AFM.
Posted By: Anonymous
Re: time to change induction? - 29/03/2006 01:58
right well a few good sugestions there lads cheers,its not that my k&n is dirty its got a rip in it 
so apexi sounds good if not can i use any size cone or is it better to be the same size as the beast k&n produce to get more air? also bannaman can i get a pic of your green cotten cheers
so apexi sounds good if not can i use any size cone or is it better to be the same size as the beast k&n produce to get more air? also bannaman can i get a pic of your green cotten cheers
Posted By: Anonymous
Re: time to change induction? - 29/03/2006 04:35
Yeah no probs, but wont be able to post a pic till after 6 tomorrow night. Also i think i have the part number on the box in my attick.
Posted By: Anonymous
Re: time to change induction? - 29/03/2006 05:06
Quote:cheers buddy you have pm aswell on the pipe dimentions
Yeah no probs, but wont be able to post a pic till after 6 tomorrow night. Also i think i have the part number on the box in my attick.
Posted By: Anonymous
Re: time to change induction? - 29/03/2006 23:52
A pic of the air filter and one of the part number (P0508) hope this helps you
The filter fits straight onto the AFM
The filter fits straight onto the AFM
Posted By: Anonymous
Re: time to change induction? - 30/03/2006 00:13
cheers mate its a toss up between that or a apexi hummm?!