Fiat Coupe Club UK

3 bar map sensor....

Posted By: nick_d

3 bar map sensor.... - 24/08/2010 07:22

hi all.....

was wondering where to get one from?
will i be ok getting one of the 35 quid ones off ebay.... Or would i be better buying a genuine cosworth one which will be possibly double the price??

nick
Posted By: mattB

Re: 3 bar map sensor.... - 24/08/2010 07:26

Standard 20VT one fits, doesn't it?
Posted By: nick_d

Re: 3 bar map sensor.... - 24/08/2010 07:52

can someone confirm this? Think you may be thinking of FPR...
pretty sure 20vt doesn't have map sensor?!

nick
Posted By: Anonymous

Re: 3 bar map sensor.... - 24/08/2010 10:45

20vt is MAF as above getting confused with FPR
Posted By: Anonymous

Re: 3 bar map sensor.... - 24/08/2010 11:12

Get a genuine MAP sensor they are about £60. Do not buy ebay hacklash jobby.
Posted By: nick_d

Re: 3 bar map sensor.... - 24/08/2010 12:18

cheers j!
Posted By: Saint

Re: 3 bar map sensor.... - 24/08/2010 20:01

There are 3bar cosworth ones (2 bar absolute) which only allows 7psi (.5bar) more than oe and there is is also a 4bar one available

I would check with flea as didn't he recently map a cosworth to 32psi? which is over 2bar (absol) pressure so maybe it had the higher 4 bar sensor
Posted By: Anonymous

Re: 3 bar map sensor.... - 24/08/2010 21:27

Originally Posted By: Saint
There are 3bar cosworth ones (2 bar absolute)


3bar is absolute pressure and 2 bar is gauge pressure. nerd I know sorry laugh
Posted By: Saint

Re: 3 bar map sensor.... - 24/08/2010 22:24

what he said - 3bar absolute - 2 bar gauge

but there is a 4 bar absolute that is available (3 gauge), I guess the resolution will be lower but I am not sure how much of a issue this would be. Vas used to have one but I havn't seen him around for a while.
Posted By: nick_d

Re: 3 bar map sensor.... - 25/08/2010 08:19

hi saint.... Long time no speak.. smile
i'm definitely not going above 2 bar boost so the 3bar absolute will be fine!
probably won't get above 1.7 bar... Depends if the turbo is still efficient up that high?
as you know i'm not entirely sure to the EXACT spec of my compressor wheel? smile

Nick
Posted By: barnacle

Re: 3 bar map sensor.... - 25/08/2010 08:33

But... if you put a 3-bar sensor in, you're going to have to map instantly - it probably won't even idle well. The one that's in there will give a 0-5v reading for 0-2.4 bar, so a touch under two volts at atmos. A 3-bar sensor will give only about 1.7v at atmos; without recalibration in the ECU it's going to believe there's less pressure than there actually is. It's going to be pretty lean...

I'm sure I'm preaching to the choir here - but just in case anyone's reading that hasn't thought about this!
Posted By: nick_d

Re: 3 bar map sensor.... - 25/08/2010 09:16

yes this is what's happening buddy.... Having a base map put in place on saturday.... 3 bar sensor not being installed until full mapping!

Nick
© 2024 Fiat Coupe Club UK