Fiat Coupe Club UK

Rolling Road day near Peterborough?

Posted By: Anonymous

Rolling Road day near Peterborough? - 16/05/2007 19:13

Anyone interested in doing a rolling road day at Tiger Racing near Peterborough? They have just put in a new 2WD dyno and are offering runs for £45 if there are 15 or more people interested.
http://www.tigerracing.com
Posted By: Anonymous

Re: Anyone for a dyno day near Peterborough? - 17/05/2007 04:05

Might even be able to do it for £35 if anyone's interested?
Posted By: danb052k

Re: Anyone for a dyno day near Peterborough? - 18/05/2007 01:46

Hi

I only have a standard 20vt but would still be intrested in this as I would be curious to see just what the engine is putting out after 7 years since new.

Dan
Posted By: carphone

Re: Anyone for a dyno day near Peterborough? - 20/05/2007 19:31

 Originally Posted By: danb052k
Hi

I only have a standard 20vt but would still be intrested in this as I would be curious to see just what the engine is putting out after 7 years since new.

Dan


exactly what i was thinking, put me down for it.
Posted By: Anonymous

Re: Anyone for a dyno day near Peterborough? - 22/05/2007 03:09

I could be interested depending on when it is.
Posted By: Darlo_Nick

Re: Anyone for a dyno day near Peterborough? - 23/05/2007 02:28

I would be interested depending on date. I leave Nottingham the end of June for the North-East you see!!
Posted By: Anonymous

Re: Anyone for a dyno day near Peterborough? - 23/05/2007 03:09

im down for this, maybe co-inside the yorkshire meet with this, its the confidence of going to a coop friendly rr session with other coop owners.
Posted By: Anonymous

Re: Anyone for a dyno day near Peterborough? - 23/05/2007 04:19

Yorkshire is a long way from Peterborough
Posted By: Anonymous

Re: Anyone for a dyno day near Peterborough? - 23/05/2007 13:27

im situated just near a1, can do peterborough in around an 1hr 30mins
Posted By: danb052k

Re: Anyone for a dyno day near Peterborough? - 28/05/2007 19:39

Any more news on this scooby??

My mate has a M3 EVO convertible and is also intrested in finding just how many horses have left over the years, would it be ok to put his name down too or is it Coupes only??

Cheers,
Dan
Posted By: Anonymous

Re: Anyone for a dyno day near Peterborough? - 28/05/2007 21:08

Just trying to gauge interest, I won't be going. The company involved contacted me and asked if we'd be interested, don't suppose they care what car it is \:\)
Posted By: Anonymous

Re: Anyone for a dyno day near Peterborough? - 01/06/2007 01:23

Hi,

I am new to this forum , but have a great love and passion for the Coupe. I have been fighting to get more power from my Coupe recently and am keen to know what it is putting out at the moment. Iv had a highbred Turbo fitted and replaced the Air Flow Meter and a few other parts after experiencing some running problems. Im due to have a superchip fitted very soon but would like to see the BHP etc before and after this is done. I work for myself so time of event is not a problem for me. I also only live 25ish miles from P'boro so Ideal location ! Keep me posted if this comes off as i am deffinantly inetrested to see if I can hit the majic 300bhp.
Posted By: mattB

Re: Anyone for a dyno day near Peterborough? - 01/06/2007 01:27

Oooh, dont fit a superchip. \:\(
Posted By: pinin_prestatyn

Re: Anyone for a dyno day near Peterborough? - 01/06/2007 06:53

mmm, before you do, have an omlette. with ham + cheese \:# fantastic.
Posted By: Anonymous

Re: Anyone for a dyno day near Peterborough? - 01/06/2007 12:26

So you tell me not to fit the Super Chip, give us a hint as to why not ?
Posted By: Nigel

Re: Anyone for a dyno day near Peterborough? - 01/06/2007 12:31

Superchips have a reputation for overfuelling in a Coupe - not good for power, not good for fuel consumption and fairly certain to result in borewash and accelerated cylinder wear.

Other than that, they're fine

If you want to chip your car, do a search (and be prepared for a LOT of results) on "G-Tec" - this forum has its own tame chip-writer, GrahamL. The results speak for themsleves. Just about all the 250 - 350 bhp Coupes use a version of his chips.
Posted By: Anonymous

Re: Anyone for a dyno day near Peterborough? - 02/06/2007 12:34

OK So how can I get hold of GrahamL I am desperate !!
Posted By: JimO

Re: Anyone for a dyno day near Peterborough? - 02/06/2007 12:37

you can PM him here

or buy from here

they are both Graham \:\)
Posted By: Anonymous

Re: Anyone for a dyno day near Peterborough? - 02/06/2007 12:53

Thanks JimO This deffinantly seems like the guy i need to get in contact with !! Iv just replaced loads of kit that he has listed !! Drat ! Thanks again.
Posted By: Anonymous

Re: Anyone for a dyno day near Peterborough? - 02/06/2007 14:25

Just cancelled the £500 Superchip. Now just got to get enough courage up to fit a G-Tech myself !! unless anyone knows of a decent mechanic in the Northants/midlands area
Posted By: Anonymous

Re: Anyone for a dyno day near Peterborough? - 03/06/2007 15:05

Im interested, standard but would like to know what she's putting out. depending on then date of course
Posted By: Anonymous

Re: Anyone for a dyno day near Peterborough? - 04/06/2007 02:51

Egg, check the "How-To" section out on the forum, theres a walkthru for it.
Ftting a new chip took me 30mins, its a somewhat daunting but straightforward and easy job.
Posted By: Anonymous

Re: Anyone for a dyno day near Peterborough? - 06/06/2007 02:31

Nice one pfoe, thanks, Just waiting for the chip now, after getting the courage to do it !! as a great man once said.... I'll be back !
Posted By: Richard24

Re: Anyone for a dyno day near Peterborough? - 06/06/2007 02:50

Have tigerracing had much to do with tuned coops before ?
All i need to do is fit my Walbro, then need to do a dyno run & a bit of setting up of the Greddy on the RR.
Should crack 300bhp if everything is ok.
Posted By: Anonymous

Re: Anyone for a dyno day near Peterborough? - 06/06/2007 16:54

 Originally Posted By: Egg
Nice one pfoe, thanks, Just waiting for the chip now, after getting the courage to do it !! as a great man once said.... I'll be back !


egg, if you decide to do it yourself all well and good....however, you will still need to become aquainted with motor-mech in brum for top quality spannering services for the bigger jobs....he's a great bloke and good pricing too...0121-633-9823, paul gilbert and the lovely svet.. ;\)
Posted By: Anonymous

Re: Anyone for a dyno day near Peterborough? - 06/06/2007 23:45

Thanks for the contact proccy. Do they have a RR and mapping facilities ?
Posted By: Anonymous

Re: Anyone for a dyno day near Peterborough? - 09/06/2007 01:37

Right GTECH Fitted and ready for the rollers ! Please tell me where and when, im dieing to see what the improvement is. I have found a company at Silverstone that would do it for £65inc but this seems a bit steep for me any other RR near Northamptonshire that anyone knows of ?
Posted By: Richard24

Re: Anyone for a dyno day near Peterborough? - 09/06/2007 02:37

Owen Developments in oxfordshire, think they are fairly expensive
© 2024 Fiat Coupe Club UK