avcr now set up result.

Just had my avcr set up after a lower then expected result at the rr meet on the 5th july @ dyno demon. My result graphs below,

Fly Wheel Power
http://i176.photobucket.com/albums/w174/clay99uk/CIMG1028.jpg

Road Wheel Power
http://i176.photobucket.com/albums/w174/clay99uk/CIMG1026.jpg

Result good considering the weather today the dyno room was so hot after my car was on the rr for about 2 hours. The said if it was a cold winters day the power would be over 300. Cant argue with what i got might aswell call it 300 anyway. Graph was not printed for torque fig but he showed me that it was 300ftlb bang on.

Great stuff well done mate. Hope i get a similar gain from having my Greddy set up properly!

Good stuff Clay, I'm getting my AVCR set up on saturday at Dyno Demon too (big thanks to MABR for all the organising he's done).

My spec looks almost identical to yours, so I'm hoping for similar results!

Two hours to set up an Apexi??? Is there something I'm missing!!!

Does seem quite excessive, but the main thing is you're happy. Did he use third gear as the graph says?

Good news finally Clayton.

Should finally hit the magic 300 at the October RR Day.




You're very welcome Matt. After everything I've watched you go through with your coop since the RR Day at Racing Line, I've got my fingers crossed that you finally get a similar result on Saturday.

how much they charge you clay ?

It was only the second avcr the lad had set up they deal mainly with the greddy's.

sprintsteve - It cost 88 pound not sure if thats just because i know steve the owner or what hopefully mattw wont be paying much more as we are putting enough buisness there way lol.

Matty - Yes 3rd gear did get used.

Why does the rpm only reach 5,900rpm? Sounds like another RR shop that can't operate the dyno...

maybe they took other runs to the top but that particular one just happened to be the highest power. looks like they stopped it right at the peak.

They definitely know what theyre doing though, no question about that

That is your torque graph! see lb/ft on the left, peaks at 300

What was your fuelling like, you mentioned it was worse than mine, but you dont have in on graph.

I just got my avcr fitted last weekend and they charged me 4 hours
wish i had gone else where now

Andrew

Please tell me that included fitting!

yeah it included the wiring into the ecu i had the boost valve and actuator fitted to the car they had the wiring and setting up to do.

does anybody here actually understand hw to work the avcr? i can flick through the different screens but i have no idea hw to do anything else

Andrew

Here

well done mate nice result. you will have to take me out in it.