JDM Dymo Rolling Rd

had me car at jdm today and j is willing to do 10 coops, 3 runs for £25. for this club. any interest?

http://jdm-dyno.com/index.html

Do they check fuelling and for det? If so, £25 is very cheap.

dunno about det but he does fueling.

If they check for Det, I'd be interested.

Suggest you set a date and post up a listing of "interested's".

I can co-ordinate / support you with this if you wish?

cheers, just trying to help the forum and j.. i could ring j and see what the best dates would be for him. what would be best, 2 weeks from now? a month?

PM sent to save clogging this thread.

Yes he does check for detonation, via a headset.

Spent hours with them on whilst mapping my engine.

umm, robs engine..

He looks after my coup fitted my forged pistons etc
Made 271 bhp an 275 lbft on his rollers, My dyno graph and a pic Here

Had Pauls coupe LE on JDM`s rollers today for a check up as it has had a Gtec 1 and ebc fitted,It made 257.9 bhp @ 1bar and 262 lbft

Graph here

Was going to run at 1.2 but the DV was failing and the Greddy profec was playing up

nice one, might take it back next week.. depends if i get a apexi boost thing.

took my baby today, 278.6bhp @5615rpm 1.15 bar 310.8lb-ft. well happy

Graphs?

i will post them up later

What turbo's that on Johna? Torque figures seem alot higher than I would have expected.

hybrid md370

http://i539.photobucket.com/albums/ff360/johna0076/scan0001.jpg

http://i539.photobucket.com/albums/ff360/johna0076/scan0002.jpg

Nice one I'll get my one down there once its done. I keep making my self more work.
Is any one still interested in making a social of this <--(should I have bumped the other thread?)

aye, will going up in acoupe of weeks as hes going to fit my evo intercooler and wield the pipes together

Good results Looks like you have an overboost spike, you won't get 310lbs/ft at 1.15bar. The fueling is safe but you are running very rich from around 4000rpm to redline.

thanks. you got it spot on, (thats what he told me) got the car running on the other scan. just that the other one sounded better still need to get the walbro fitted aswell.

how do i get it to hold 1.2 bar? when i had a manual t-boost on it held 1.2 ok.

Johna, your graphs have gone...