Posted By: Trappy
342bhp, 295lbs/ft - 06/01/2010 12:47
After the rebuild I wanted to get Leighton to check my map so just before Christmas, I popped over to Bristol. While there I thought I'd get him to put my car on the local Dastek and get me on the FC Performance dyno league.
After fixing my thermostat, Leighton took the car out for a bit, made a few tweaks and returned for the dyno run. Temps were very low @ 6oC which can only have helped.
1.0bar
285.5bhp @ 6,719rpm
253.1lbs/ft @ 5,403rpm
239.7whp @ 6,030rpm
1.3bar
329.5bhp @ 6,680rpm
284.5lbs/ft @ 5,349rpm
275.2whp @ 6,313rpm
1.4bar
342.4bhp @ 6,558rpm
294.9lbs/ft @ 5,378rpm
287.5whp @ 6,379rpm
Graph
This is on the standard 2.25" downpipe!
Next 'power' mods;
'Proper' 3" DP tapering to 2.75"
Blueflame 2.75" DP back
Uprated injectors
Walbro 255
Fleamap Stage 4
Estimates on what she will make?
After fixing my thermostat, Leighton took the car out for a bit, made a few tweaks and returned for the dyno run. Temps were very low @ 6oC which can only have helped.
1.0bar
285.5bhp @ 6,719rpm
253.1lbs/ft @ 5,403rpm
239.7whp @ 6,030rpm
1.3bar
329.5bhp @ 6,680rpm
284.5lbs/ft @ 5,349rpm
275.2whp @ 6,313rpm
1.4bar
342.4bhp @ 6,558rpm
294.9lbs/ft @ 5,378rpm
287.5whp @ 6,379rpm
Graph
This is on the standard 2.25" downpipe!
Next 'power' mods;
'Proper' 3" DP tapering to 2.75"
Blueflame 2.75" DP back
Uprated injectors
Walbro 255
Fleamap Stage 4
Estimates on what she will make?