How to install timing belt 20v

i remove timing belt and cam without make mark there
Now I want to return it
But I do not know how ?

you should look at the 'How To...' guides, Talal...

sorry
I do not understand
What you mean

How to link

http://www.fiatcoupe.net/howto.php?ID=1&chapter=26#content2

there is mark in crankshaft





about camshaft pulley only at the right side there is one mark like hole #1
i put cam bearing in first line in top #2
is that right or wrong ?

The crank looks to be in the right place but the cams are wrong, I'd be concerned that the engine has suffered damage with bent valves now and I'd remove the cams and run a compression test on each cylinder, if they're is 150psi on each cylinder refit the cam with number 1 cylinder at TDC and use the cam locks, the marks on the pulley wheels won't help, locks and a TDC gauge is the correct method.

I've seen a lot less of these than Joe but agree with him that the cams are out of position relative to one another.
This thread has all the cambelt guides on it.
Cambelt thread

when i turn crankshaft i remove the camshaft
i know if turn that the valves is broken
my problem now with camshaft
because no mark there
if anybody have picture for camshaft maybe i can replay

and i am sorry about my english language

I'll email you the more detailed PDF , maybe that will help, but you really need the cam locking + TDC tools.

cam locking + TDC tools.
i buy them from ebay uk
after 7 to 12 days reach to my country

i have 2 camshaft locking tool

K1 + K2

where i put this ?

K1 on inlet cam D, K2 on exhaust cam 2.

i have space
i do not remember what is there before ?
if anything there what is name ?
and what is number of engine oil and how many liters ?

The cam variator runs in a shell bearing, you're missing the top half.

any link for that
because i will buy that's

Part number 71730023, still showing as available from Fiat.

do you have link for that

Showing new at the time from Germany, search the trader or google the part number.

http://www.alfaworkshop.co.uk/parts/147_Variator.shtml

i see this same number : 71730023
but this for Alfa Romeo

i buy that
one with hole on top

i fix that on top or down ?

The shell has locating tags, no holes so they will fit either way, top or bottom.

thank you everyone
I've run the car
I need a map to install the pipes for radiator


https://www.youtube.com/watch?v=_AOXiFjjyxA

Well done

There isn't really a diagram for that in any of the manuals. Which hoses are you stuck with? If you take a pic of all the ones you aren't sure of we can probably explain where they should go.

i fixed it

now i waiting one coil because is broken

what is oil for gear ?
because oil still there from 2011

and my gear stick is free
i will make video for thats

Gearbox oil is 75w90. It takes 1.75L to top up (via dipstick tube) after draining if you open both drain points, or just the one at the back on the diff.

Unless the car has done super high mileage I wouldn't change the gearbox oil just cause it's 6 years old though.

thank you sir

about gear stick is free
https://www.youtube.com/watch?v=y3TI4sSedgE

i think bushing ?
if bushing from where can get that ?