Hi guys.

Does anyone know what size bulb/s are used for the interior bulbs above your head?

Fancy upgrading them to LED

The FAQ section is your bible.....


Bulbs

Headlight H1 for dipped and main beam
Front fogs H1 despite what the handbook says!
Front side lights 12V-5w wedge 501
Front indicators 12V –21w amber bulb bayonet 12V 233 or BA9S
Side Indicators 12V – 5w bayonet
Rear indicators 12V – 21w 382 bayonet
Rear fog 12V – 21w 382 bayonet
Rear tail and stop 12V – 5/21w 380 bayonet
Rear reverse 12V –21w 382 bayonet
Number plate 12V 5w cylinder type bulb clip fit
Rear high level brake push fit It's bulb type 284 in Halfords 12V 2.3W and note that the same size ones with smaller wattages don't work. Super bright T5 286 10k MCD Ultra bright Red dash leds are a good replacement and will last forever. Link here
Dashboard and Centre Console Illumination Bulbs 12v Push fit type 286 in white
Interior courtesy lights 38mm 12v festoon bulbs

easy to do the interior light to led but not so easy to do the map light as led bulbs only work one way and I couldn't be bothered to re-wire the map light . sorry I cant remember what size the bulbs are .

Yeah I've changed the interior bulb and boot bulb to LED 38mm festoon bulbs, but can't figure out the size of the little map light bulb!