Loc: Gloucester UK
I have looked at doing air box mods to my 20V.
The original pipe feeding to the airbox from front grille seems to be very restrictive, small diameter and seems to have a few box shaped bits on it. what are they for ?
Would chopping all this off and replacing it with a 3" bellmouth on the front of the air box give any more power and responsiveness, don't want to loose any low down torque though. Daily driver in all weathers. cheers
Yes fit what you have as the VIS and early n/a intake system is the same on both models, they only differ at the expansion bellows before the throttle body as the early n/a has an air temp sensor in the base of that pipe.