Hi all... forum newbie here

i have ventured over from the bravo forum to ask for your help...

i have a hgt that i love and i also have a set of brembos from your beloved coupe 20vt... but i am stuggling to find a supplier of wheels that will clear these brakes... andy luck here, i know that aftermarket wheels are fitted so is there a spacer of something to allow more clearance???

anyway, all help is really appreciated as i want my 305mm brakes on

cheers

PaulR20v

*andy= any
sorry

There are a few direct fitments, Azev spring to mind. Alternatively, you could use some hub-centric spacers to increase the clearance (make sure you get ones specifically for Fiat hubs though, don't use universal ones).

I used MOMO spacers that are made specially for the Coupe they allowed me to fit AWS racing 17's with 30ET.

My Azev E 17" were custom made by Azev to fit over the calipers:

Link
Link2

Damnnnnnnn ... not much between wheels and calipers

Jax - there is about 4-5mm but it looks closer in the pic!

Team Dynamics Pro-Race 1 fit no problems at all .

18" Urban Racers ,100pcd with wobbly bolts fit ok too...hard to get now tho`

Just a thought, but dont these spacers bring the wheel out? does this not creat isusses with clearance and lowering? thanks all for your help by the way.

Paul R

18" TSW Ribs with 100 PCD and wobbly bolts go on a treat, still available (although only in anthracite, which mine are) - and for the record i got them about a fortnight before Geraint20VT

I ordered the wheels after being told that they would fit. They didn't and it was a pure fluke that the centre had these sitting on a shelf for display purposes . Any way Ive no idea on a part number but after the centre looked into it they checked that they where for the Coupe.

Some pics
Spacer
Caliper clearance
Alloy

Thanks for the pics.. But if you lowered the ca wouldnt they catch on the arches now?

my bravo is lowered about 60mm on 19"s so clearance is a bit tight at the moment to say the least

i am willing to change the wheels but again, no point changeing them if spacers are need regarless? might aswell stick with the ones have...(which i love)

So has anyone fitted these spacers and lowered there cars? any problems?

Thank you all for your help, and the pics

Paul

It'll be tight when I get it lowered but I'm sure it'll be OK. I know because I to have a Bravo lowered 40mm on 18's with full bodykit. A bit of DIY trimming so dat it wouldn't catch but no big dramas. I'm sure the Coupe has more room as it's just got 17's.

you have a bravo on 18s? have you tried www.fiatboo.co.uk you may find it helpful at times?

anyway, diy triming ment i could fit 19s on mine, hgt have wider front arches so i might be lucky...

cheers

Paul R

When I bought my OZ Records for my NA, I was told they would also fit the Turbo. I didn't check though.