1 registered members (1 invisible),
187
guests, and 3
spiders. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums69
Topics113,638
Posts1,341,421
Members1,814
|
Most Online731 Jan 14th, 2020
|
|
|
16vt JTM with evo turbo, standard cams 1,2bar
#1061806
30/06/2010 07:55
30/06/2010 07:55
|
jtm
Unregistered
|
jtm
Unregistered
|
And the results are ... 313hp / 5290rpm ( then goes lean ) 423,6nm / 4100rpm and the down low torque numbers : 2000rpm : 210nm 2500rpm : 265nm 2900rpm : 340nm 3300rpm : 400nm 3400rpm : +400nm ---> 5400rpm pretty happy, but thats only half way results .. oh, and this was with Dink´s 280hp+ chip
Last edited by jtm; 30/06/2010 10:23.
|
|
|
Re: 16vt JTM with evo turbo, standard cams 1,2bar
[Re: ]
#1061856
30/06/2010 09:37
30/06/2010 09:37
|
Joined: Dec 2005
Posts: 2,194 Göteborg, Sweden
Freddan72
Competition Level
|
Competition Level
Joined: Dec 2005
Posts: 2,194
Göteborg, Sweden
|
Hehe Nice result! Is it wheel power/torque numbers?
|
|
|
Re: 16vt JTM with evo turbo, standard cams 1,2bar
[Re: ]
#1061883
30/06/2010 10:09
30/06/2010 10:09
|
jtm
Unregistered
|
jtm
Unregistered
|
Its the engine power.. these standard cams needs more boost for good results hopefully I can figure the wastegate problem, and use more boost and rpms..
|
|
|
Re: 16vt JTM with evo turbo, standard cams 1,2bar
[Re: ]
#1061889
30/06/2010 10:15
30/06/2010 10:15
|
jtm
Unregistered
|
jtm
Unregistered
|
my ex turbo car with same engine.. gave 325hp / 5700rpm and 1.42bar boost and 422nm and I have 1.2bar only 12hp difference..' much better torque and a little higher too 1,6nm
|
|
|
Re: 16vt JTM with evo turbo, standard cams 1,2bar
[Re: ]
#1061904
30/06/2010 10:36
30/06/2010 10:36
|
jtm
Unregistered
|
jtm
Unregistered
|
5500- 6000rpm I think...
with .63 garrett it was 5700-6400rpm same power.
I think, that with 1.5bar I can get 350hp / 450nm
|
|
|
Re: 16vt JTM with evo turbo, standard cams 1,2bar
[Re: ]
#1061960
30/06/2010 11:40
30/06/2010 11:40
|
Joined: Dec 2005
Posts: 2,194 Göteborg, Sweden
Freddan72
Competition Level
|
Competition Level
Joined: Dec 2005
Posts: 2,194
Göteborg, Sweden
|
Its the engine power.. these standard cams needs more boost for good results hopefully I can figure the wastegate problem, and use more boost and rpms.. Can you give me wheel power&torque numbers?
|
|
|
Re: 16vt JTM with evo turbo, standard cams 1,2bar
[Re: Freddan72]
#1062254
30/06/2010 20:14
30/06/2010 20:14
|
jtm
Unregistered
|
jtm
Unregistered
|
sorry, didnt get them.. but guess somewhere 260hp+ ..
( if I saw right )
|
|
|
Re: 16vt JTM with evo turbo, standard cams 1,2bar
[Re: ]
#1062327
01/07/2010 00:57
01/07/2010 00:57
|
Joined: Dec 2005
Posts: 1,895 New Zealand
Saint
My life on the forum
|
My life on the forum
Joined: Dec 2005
Posts: 1,895
New Zealand
|
Great result Jarkko and good to see the engine into life Those low down torque figures are awesome. Below for comparsion with mine, given I have .48 T3 that is meant to be good for spool and low down torque, you are making way more power early and I doubt it will drop off much more (if any) than the .48 My torque in Nm by revs is below compared to yours, at 3000-3500 rpm you are making 100nm more and thats the .48a/r T3, by 400rpm we are somewhat back in line as the .48 has finally spoolled 2000rpm 180nm JTM +30 2500rpm 190nm JTM +75 3000rpm 230nm JTM +110 3500rpm 284nm JTM +120 4000rpm 380nm JTM +20 4500rpm 405nm JTM +20 5000rpm 405nm JTM +20? 5500rpm 340nm 6000rpm 325nm 6500rpm 284nm Is this the evo 9 turbo you ended up using? twin scroll with standard wastegate? flowed head? Anyway excellent result - congrats, but give us some graphs or full results.
|
|
|
Re: 16vt JTM with evo turbo, standard cams 1,2bar
[Re: Saint]
#1062356
01/07/2010 08:17
01/07/2010 08:17
|
jtm
Unregistered
|
jtm
Unregistered
|
Standard evo 9 turbo, with standard wastegate ( that seems to be the problem.. ) yes twin scroll and we make Tomei style manifold to it. you can see that here : http://s224.photobucket.com/albums/dd72/jq4tm/?action=view¤t=paketti.jpg&newest=1almost standard head. just taking the badest rocks away from there.. the scale of the RR results are funny, but here are total specs : 1600rpm hp: 41 nm: 180 2000rpm hp: 59,8 nm: 210 2500rpm hp: 94,5 nm: 265 2900rpm hp: 140 nm: 340 3300rpm hp: 188 nm: 400 3800rpm hp: 219 nm: 405 4200rpm hp: 250 nm: 418 ( around 4100/ 423,6nm ) 5000rpm hp: 288 nm: 405 5300rpm hp: 313 nm: 414 I have to take the dp off, and try to make the wastegate better, and have a new program for 525cc injectors, and for more boost ... hoping for 350 / +450 results..
|
|
|
Re: 16vt JTM with evo turbo, standard cams 1,2bar
[Re: ]
#1062357
01/07/2010 08:19
01/07/2010 08:19
|
jtm
Unregistered
|
jtm
Unregistered
|
could someone make with these numbers somehow simekind of RR paper.. so its easier to look at.. ?
|
|
|
Re: 16vt JTM with evo turbo, standard cams 1,2bar
[Re: ]
#1062933
02/07/2010 09:13
02/07/2010 09:13
|
Joined: Dec 2005
Posts: 2,194 Göteborg, Sweden
Freddan72
Competition Level
|
Competition Level
Joined: Dec 2005
Posts: 2,194
Göteborg, Sweden
|
sorry, didnt get them.. but guess somewhere 260hp+ ..
( if I saw right ) Is that at 5290 rpm?
|
|
|
Re: 16vt JTM with evo turbo, standard cams 1,2bar
[Re: Freddan72]
#1062979
02/07/2010 09:48
02/07/2010 09:48
|
jtm
Unregistered
|
jtm
Unregistered
|
i believe it was at same rpm, but it chanced so quickly to that engine power paper... I'll have to ask if i can have it on next rr this summer.
|
|
|
Re: 16vt JTM with evo turbo, standard cams 1,2bar
[Re: kj16v]
#1063791
04/07/2010 06:21
04/07/2010 06:21
|
jtm
Unregistered
|
jtm
Unregistered
|
yep.. I´m going back this summer, with 1.5bar boost and 525cc injectors and Dink´s program for that. ( hoping around 340-350hp and / 450+nm ) I have : - mitsubishi oem evo 9 turbo (not titanium wheel/ axel.. I have that still on my table .. ) - Fmic ( a little different design, should be very good cooling ) - home made 3" exhaust turbo to back - delta integrale inlet manifold - tomei style exhaust manifold ( for twin scroll turbo, short pipes ) - just a little work on the head.. ( biggest rocks away.. ) -Dinks 280+ hp chip - adjustable fuel pressure regulator - Navalinea better gasket on the head - free flow airfilter thats about it... - bigger oil cooler etc, and other stuff, that doesnt make anything to the power ..
Last edited by jtm; 04/07/2010 06:24.
|
|
|
Re: 16vt JTM with evo turbo, standard cams 1,2bar
[Re: ]
#1109685
01/10/2010 08:44
01/10/2010 08:44
|
jtm
Unregistered
|
jtm
Unregistered
|
1.45bar 357,5hp / 5700rpm 455,7 nm +400nm between 3050rpm - 6000rpm have to chance slippery clutch..
|
|
|
Re: 16vt JTM with evo turbo, standard cams 1,2bar
[Re: ]
#1109945
01/10/2010 17:05
01/10/2010 17:05
|
dink
Unregistered
|
dink
Unregistered
|
1.45bar 357,5hp / 5700rpm 455,7 nm +400nm between 3050rpm - 6000rpm have to chance slippery clutch.. That's about right with your mods. You could have gotten another 15-20Nm i'm sure if it wasn't for the clutch.
|
|
|
Re: 16vt JTM with evo turbo, standard cams 1,2bar
[Re: ]
#1109954
01/10/2010 17:47
01/10/2010 17:47
|
jtm
Unregistered
|
jtm
Unregistered
|
yes, thinking about the same, and because my little wastegate opening, there should be a 15-25nm more peak torque..
|
|
|
|