0 registered members (),
258
guests, and 3
spiders. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums69
Topics113,633
Posts1,341,396
Members1,814
|
Most Online731 Jan 14th, 2020
|
|
|
Wiring Loom Rubber Boots
#1653594
22/10/2021 17:25
22/10/2021 17:25
|
Joined: Jun 2021
Posts: 41 Towcester
Che
OP
Club member 1907
|
OP
Club member 1907
Discoverer
Joined: Jun 2021
Posts: 41
Towcester
|
Hi Folks,
Whilst spending an inordinate amount of time scrolling through the eper to try and track down the numbers, does anyone know if there is an easy way to obtain replacements for all the rubber boots for the engine bay wiring loom? mine are mostly perished and I want to replace them all with OEM standard items if still possible.
Last edited by Che; 22/10/2021 18:21.
|
|
|
Re: Wiring Loom Rubber Boots
[Re: barnacle]
#1653637
24/10/2021 19:31
24/10/2021 19:31
|
Joined: Dec 2005
Posts: 116 Essex
1st_things_1st
Club member 1460
|
Club member 1460
On a journey
Joined: Dec 2005
Posts: 116
Essex
|
Looking at this myself, in case you need the tape they used I believe it's made by Tesa - https://www.speedsport.co.uk/tesata...ape-20?Tesa-wiring-harness-loom-tape-20.When I replaced the gear change linkage boots, as they had perished, I found a similar style bellows boot. As I could not get them over the ball joint at the end (I did try ), I used a craft knife to cut along the seam. I then used super glue on the edges, left it for a bit to set, fitted it carefully and then held the seam together. Difficult to tell where the cut is, if you cut carefully and align the seams when gluing back together. It's still holding today. With better access you could probably glue together in situ.
|
|
|
Re: Wiring Loom Rubber Boots
[Re: Che]
#1655852
17/02/2022 20:03
17/02/2022 20:03
|
Joined: Sep 2010
Posts: 526 The Netherlands
jaaps2
Club Member 1560
|
Club Member 1560
Enjoying the ride
Joined: Sep 2010
Posts: 526
The Netherlands
|
If anyone else is looking for the boots, I found all the other sizes available via an auction website, UK Supplier with the multiple different position options (The links provided previously only had the 4 position).
Thanks again,
Che Do you have the links? So others can try the same.
|
|
|
|