I presume you have got the lower bot of the console off too?
It is "quite easy"
remove the screws under the ashtray liner. There are a couple more screws eaily seen on the top edge IIRC
Then remove the gear leaver gaiter and you will be able to feel the hidden screw heads in the corners. You need to access these from behind the console using the acces via the gaitor to guide the driver into the screw heads.
Getting it back in is a far bigger ordeal unless you make some modification to the ashtray unit.
Re: Removing the Ashtray
[Re: bockers]
#1067344 09/07/201023:2709/07/201023:27
This means you can loosely engage the screw then fit the ashtray over them and do them up. Otherwise it is a mare to locate the screws and you will lose them under the carpet.
Re: Removing the Ashtray
[Re: bockers]
#1067366 10/07/201000:0410/07/201000:04
This means you can loosely engage the screw then fit the ashtray over them and do them up. Otherwise it is a mare to locate the crews and you will loose them under the carpet.
Hi , what was the previous pic as I'm struggling to identify what to do?
Cheers
Kenny
Re: Removing the Ashtray
[Re: ]
#1268595 08/10/201123:1708/10/201123:17
I know this is a very old thread but the subject hasn't changed. I'd like to contribute with pictures - what is the best hosting site to use these days? Will Dropbox work?
It seems there are so many websites billed as 'Free' only to find you can just have a 'free trial', but I have signed up to 'Icedrive.net' and that does seem to be genuinely free for limited use, so I've uploaded one pic and will try it here to see if it works. I've said it before though; it's a shame this forum doesn't host its own photos.
Well slightly embarrassing - I suppose I'm not the first and won't be the last to rush in with a question before looking for the answer, but I have now found out that this site does now host its own photos. Let's see if this works...
BINGO - brilliant. Where the file manager says you are allowed 5 photos, I assume that is 5 per post and not 5 for ever! I will post tomorrow on my centre console exploits.
20VT, Aston DBS (1968) restomod
Re: Removing the Ashtray
[Re: Skiday]
#1656547 23/03/202208:4123/03/202208:41
BINGO - brilliant. Where the file manager says you are allowed 5 photos, I assume that is 5 per post and not 5 for ever! I will post tomorrow on my centre console exploits.
Correct Andrew, 5 per post. The exception is in the Coupés For Sale section where the number is increased.
I'm just about there getting everything back in, but I have a small clip that does not seem to have a home. I didn't notice it come out so I presume it fell out at some point, unless it is not related and somehow found its way in with the other parts from the job (unlikely). Does anyone recognise this little blighter:
Had the same problem with mine, the coil of the spring had increased in diameter and reduced the length of the long upper section of the spring so it was not seated high enough in the casing. I removed the spring, decreased the diameter of the coiled section of the spring by pulling the upper straight section with a pair of pliers which increased the overall length of the spring so that it would seat in it`s original position, hope this helps.
Re: Removing the Ashtray
[Re: ucoupia]
#1658177 10/06/202207:1310/06/202207:13
Had the same problem with mine, the coil of the spring had increased in diameter and reduced the length of the long upper section of the spring so it was not seated high enough in the casing. I removed the spring, decreased the diameter of the coiled section of the spring by pulling the upper straight section with a pair of pliers which increased the overall length of the spring so that it would seat in it`s original position, hope this helps.
Thanks for the tips! I will give it a try. Thanks again!