Hi Leon,
Done like this.
Ps.....Turbo revs are sending me 2 U bends and I just pay the postage charges...£12 which aint bad.
Happy with the FMIC....only not having U bends let it down.

jeeesus thats very low! an far forward my bracket is higher also and the left hand pipe is going to be a pain in the ass over bumps!

Next time my bumper is off i'll post a picture up

Cheers Leon.
I will be raising it when I get chance.
Just have to take it easy over speed bumps.

Leon1 im still very very interested in how you managed to route the left hand side pipe almost upwards! to increase ground clearance issues etc any chance you could describe how you managed it?

my turbo pipe is rather low....have to be careful over speed bumps.

Same here!, i want to get the bumper off today and do some re-routing of the pipes!

I have taken a U bend from the reducer and angled it infront of the intercooler and upwards also, so it fits in the large recess where you're number plate is, then a straight section downwards then the rest you can work out.

This is a longer route to the turbo but you do not have any clearance issues, also flea said it didn't affect the spool up on my old hybrid turbo

quite a poor edit of the picture but you get the idea

ohhhhh, i think i know what youve done!, where have you routed the pipe back to the turbo? any under bonnet pics? also do you have a SIP??

yes i'll go get you some pics now bit im not taking the bumper off lol

Thanks mate, much appreciated,go on pretty please!

Need to get that bunper off Leon so we can see how you did it mate
I have got my time to remove it down to 5 minutes.....done it so many times with this kit

yes i can remove it quickly i just cannot be bothered lol.

come on Leon.....you know you want to really

all you'll see is a straight pipe. I don't think you'll be able to do it as your intercooler is to far forward going by your pictures

The only way it would go any further back is if I chopped all the brackets off the front of the car infront of the rad.....that seemed a bit drastic mate.
It is not too bad and I spoke to marco and he did his the same.

I cut mine off you see

you got more bottle than me mate

is there anything left holding the frame together

well its bolted by 2 bolts either side its doesn't move its sturdy

only jesting matey

I bet you put that horribley huge dump valve I sold you on as well

i bought a dv off you?

That huge thing....you only wanted the flange....remember ?
Paul

oh yes, I binned that pal as i only needed the flange for my hks dv

I was jesting...again
That was fitted to the car when I bought it......it was the loudest dump valve I have ever heard.
I replaced it with a Bailey.
When flea saw it in the boot.....he said "tell me you are not fitting that".....honestly.
Paul

im now currently re-routing my pipe work and it seems to be going very well i dont see how im going to manage to fit my pro alloy SIP though, the right hand intercooler pipe is in the way

Can you post pics Rob when you are done....without the bumper on....lol.
Be nice to see another way of doing the pipes.
Paul

sure, just uploads the before pics, so you can see my SIP dilema too! wont be long and the after pics ill up load too

these are in the way lol, how have you guys routed your pipes so you can fit a SIP???