hi everyone...
hi need your help...I think I'm right on topic for help... ;-)

I have a fiat coupe 20vturbo...but my engine is a fiat stilo 2.4 20v,and now I make a 2.5 20vturbo.
I want to reach 600hp,I have all the parts to make these potential including turbo gt35r by precision turbo and etc...I have only missing the clutch!I need a good clutch to 750nm torque!Anyone know where I can buy a good clutch twin discs and flyweel included...I do not want bronze or 6paddle because make a lot of vibration when starting in traffic,I want something that did not start to vibration in transit...

someone can tell me where I can buy?

cheers..

hi i am nearly finnished a similar build and the clutch has been one of the hardest parts to address..unfortunately i had a budget that meant i had to use the cheapest option but luckily the guy building it is a genius and has built his own twin plate system to cope with similar figures..so if you contact barbz he will make up a kit and explain everything you will need to know or give you other options..though there are not a lot of them for very high torque coops unless you have an unlimited budget..you will find his avatar/name in the user list then you can pm him.he also did not want to give me a rattly noisey vibration mad set up so it will be a good clutch if you go with his kit....good luck..oh and which of the precision line did you choose ? pm me with details of your build and we can compare and maybe help as ours is nearly ready for mappping
good luck! you'll need it!

thanks ktm..

sent pm for you and Barbz...

now I'll wait for answers...

my manifod

IMG]http://i1193.photobucket.com/albums/aa353/uel-24/06102010040.jpg[/IMG]
IMG]http://i1193.photobucket.com/albums/aa353/uel-24/06102010038.jpg[/IMG]

rods and cams

[IMG]http://i1193.photobucket.com/albums/aa353/uel-24/10102010067.jpg[/IMG]

pistons 83.60mm CR 8.0.1

[IMG]http://i1193.photobucket.com/albums/aa353/uel-24/18112010115.jpg[/IMG]

cranck new STD

[IMG]http://i1193.photobucket.com/albums/aa353/uel-24/03112010101.jpg[/IMG]

my turbo

[IMG]http://i1193.photobucket.com/albums/aa353/uel-24/15042010440.jpg[/IMG]
[IMG]http://i1193.photobucket.com/albums/aa353/uel-24/15042010439.jpg[/IMG]

external westgath tial 38mm

[IMG]http://i1193.photobucket.com/albums/aa353/uel-24/15042010432.jpg[/IMG]
and my car hehe...

IMG]http://i1193.photobucket.com/albums/aa353/uel-24/16022010339-1.jpg[/IMG]

[IMG]http://i1193.photobucket.com/albums/aa353/uel-24/18022010347.jpg[/IMG]

[IMG]http://i1193.photobucket.com/albums/aa353/uel-24/20vtvieirastreet91.jpg[/IMG]

[IMG]http://i1193.photobucket.com/albums/aa353/uel-24/img48573954copy1.jpg[/IMG]

and engine 2.020v turbo that already sold

[IMG]http://i1193.photobucket.com/albums/aa353/uel-24/23022010373-1.jpg[/IMG]

thanks and enjoy...

You could try talking to displatec, he is in Brazil and has various setup's that you could use. No idea what they are like as no one on here has really used them, apart from one person with a marea turbo that is running 650bhp+

yes I know, but in Portugal everything I buy off the european union I have to pay 30% for the state...
the price of this clutch in Brazil is 1450€ more 30% for my state...that is for the Customs Service...and this clutch in my door is 1885€...this is very expensive for a clutch...
but thanks...