It'll be the same for me..
I'll take them off/on to see any difference.

Slight difference in rigidity, yes!

And here's some pics of these GTV/Spider-braces:

Left
http://sfk.ibk.se/depa/showfile.php?carpic_no=2520&type=picture

Left & right
http://sfk.ibk.se/depa/showfile.php?carpic_no=2521&type=picture

All braces..
http://sfk.ibk.se/depa/showfile.php?carpic_no=2518&type=picture

All braces incl. undershield
http://sfk.ibk.se/depa/showfile.php?carpic_no=2522&type=picture

All mounting points had to be drilled, then with nuts welded on the inside.

Looking good per!
I still haven't got mine mounted yet, so you reckon you can feel the added stiffness?
The box section is very thin where they mount, did you have any concerns? i suppose that's where there mounted on the gtv etc.

thanks! Yes I did feel a small difference, not as big as I hoped for though. I'd say the difference was like with/without strutbrace, not fenomenal but noticable.

I did have concerns about the floor box sections, since Alfa did make the braces longer (with added mounts) for the GTA. I tried to go half-way with my added bits at the back there. Have'nt seen any bucklings yet!

Yeah should be fine.

every little helps i guess. wonder how much these are to pick up new?

PER- have you tried A welded subframe yet? i got mine from Countrycruising and it made a big difference i thought in flex.

il look into these aswell

No I actually don't believe a welded frame helps as much as the lower brace, but I did think of it once. The lower brace (modded OMP here) did make a huge difference!

Have picture of it?????

i tried a few different braces and so far the welded subframe has made the most difference

look at some of the past feed back threads to do with the subframes

at the moment i have the welded subframe, LE top brace and a nigels lower and the front end feels very tight.

as for pics i think there was some floating about on here but cant seem to find them

here a few pics when i did mine

OT.. But very nice!

thanks i think.... assuming OT is over the the top? or OTT here in NZ.

Aahh, no Off Topic since these braces does a completely different job.

Cool. Just posting pics for those asking. Cheers

Hi Per!
In Italy my friends are interested to your solution!

Can we copy it?

Of course! After all it's not mine; it's Alfa's!

Part number found!
We are quick

But.. how do you fix it under the chassis?
Thanks, and welcome back to Sweden!

I drilled holes and put nuts on the inside, bolts from the outside. Check for some pics here:

http://sfk.ibk.se/forum/showthread.php?9299-Turbobyte-m-m/page31

Ok, under the carpet, exact?
In Italy me and other 2 coopers want to try!

Hehe, no in the subframe and the beam from underneath! Careful with the drill!