276mm rear brakes

Fiat Coupe Forum
- Founded by Kayjey & James Northam
- Funded by the Club for the benefit of all owners

Fiat Coupe Club UK

Fiat Coupe Forum

» Announced
Posting images

» Related sites
Main club site
fiatcoupe.net

» External data
owners listed

Top Posters(All Time)

barnacle 33,568

stan 32,122

Theresa 23,304

PeteP 21,522

bockers 21,071

JimO 17,917

Nigel 17,367

Print Thread

276mm rear brakes #1265890 02/10/2011 11:58 02/10/2011 11:58
M Marco20ValveT Unregistered
Marco20ValveT Unregistered M	ive got quite a few 147 GTA rear calipers at work and after driving the 147 GTA the rear handbrake is SO much better than the coupe's. i need to find a rear disc's that are 4 stud and 276mm to see if it can work. i put a caliper on and it fits onto the coupe easily, just need the disc's to make this work! any idea's??

Re: 276mm rear brakes [Re: ] #1265912 02/10/2011 13:05 02/10/2011 13:05
M Marco20ValveT Unregistered
Marco20ValveT Unregistered M	not some thing i would be too happy with mate.. i know the brakes dont take that much force... but i would rather get one that fit from a different model!!

Re: 276mm rear brakes [Re: ] #1265940 02/10/2011 13:57 02/10/2011 13:57
Joined: Dec 2005 Posts: 9,706 Gone J Jimbo Je suis un Coupé
Jimbo Je suis un Coupé J Joined: Dec 2005 Posts: 9,706 Gone	What size is the coupe 16v front disc?

Re: 276mm rear brakes [Re: ] #1266057 02/10/2011 17:25 02/10/2011 17:25
J jonone Unregistered
jonone Unregistered J	Originally Posted By: Marco20ValveT not some thing i would be too happy with mate.. i know the brakes dont take that much force... but i would rather get one that fit from a different model!! some ferrari discs have holes all over the shop,i dont think it degrades the strength much. I think Sparco got 3g to re-drill the the 330mm alfa discs to 4 stud.

Re: 276mm rear brakes [Re: Jimbo] #1266300 03/10/2011 09:43 03/10/2011 09:43
Joined: Dec 2005 Posts: 12,295 Sandhurst Begbie Ex El Presidente
Begbie Ex El Presidente I AM a Coop Joined: Dec 2005 Posts: 12,295 Sandhurst	Originally Posted By: Jimbo What size is the coupe 16v front disc? IIRC 284mm Originally Posted by Jonny - After being taken out at Spa Your car is Usain Bolt with wellies

Re: 276mm rear brakes [Re: ] #1266309 03/10/2011 09:56 03/10/2011 09:56
M Marco20ValveT Unregistered
Marco20ValveT Unregistered M	Correct Begbie!! After thinking bit more I'm going to try some thing that I'm not to sure if it will work... As the GTA calipers fit the rear and will have a bigger pad surface.... If I was to fit them with the GTA pads on a standard coupe disc.. What do you think may happen??? I haven't had time to measure GTA pad face vs coupe disc face to see how much pad contact there will be.. Wose case. I could use a smaller pad if possible.... or just re-drill a set of discs....

Hop To