DV26 installation

Fiat Coupe Forum
- Founded by Kayjey & James Northam
- Funded by the Club for the benefit of all owners

Fiat Coupe Club UK

Fiat Coupe Forum

» Announced
Posting images

» Related sites
Main club site
fiatcoupe.net

» External data
owners listed

Top Posters(All Time)

barnacle 33,550

stan 32,122

Theresa 23,299

PeteP 21,510

bockers 21,071

JimO 17,917

Nigel 17,367

Print Thread

DV26 installation #14919 29/12/2005 08:30 29/12/2005 08:30
Joined: Dec 2005 Posts: 882 Banbury djmobi OP Enjoying the ride
djmobi OP Enjoying the ride Joined: Dec 2005 Posts: 882 Banbury	How easy is it to fit a DV26? Can it be done by a complete idiot with a £10 halfords tool set? Back Owning a Coupe

Re: DV26 installation #14920 29/12/2005 08:34 29/12/2005 08:34
A Anonymous Unregistered
Anonymous Unregistered A	yup, dun my dv using a basic guide off the old forum.. took about half an hour

Re: DV26 installation #14921 29/12/2005 08:38 29/12/2005 08:38
A Anonymous Unregistered
Anonymous Unregistered A	its a direct replacement for the OE DV except you have to blank off the hose to the induction pipe you need a plug about 25mm dia and you will need some jublee clips. Kev

Re: DV26 installation #14922 29/12/2005 13:29 29/12/2005 13:29
A Anonymous Unregistered
Anonymous Unregistered A	Quote: How easy is it to fit a DV26? Can it be done by a complete idiot with a £10 halfords tool set? Probably over-equipped there, to be honest It's a doddle. The plug mentioned above should be included with the DV26 - mine was.

Re: DV26 installation #14923 29/12/2005 17:20 29/12/2005 17:20
A Anonymous Unregistered
Anonymous Unregistered A	The worst part is removing the OE valve, if fitted with the original hoseclips.

Re: DV26 installation #14924 29/12/2005 17:24 29/12/2005 17:24
A Anonymous Unregistered
Anonymous Unregistered A	Pair of side cutters + 1 nr bin bag. They will never bother you again

Hop To