I've got a 16vt on which i've just fitted the evo chip, 3 bar fpr and harder plugs. I don't think all is well because on my boost gauge it is reporting that the max boost in 3rd is 0.75 bar, which is the same as it was before i fitted the chip? Does anyone know what the boost level should be know what the problem could be?

about 1.3 - 1.4bar boost tailing off to about .9 at redline

ok thanks, looks like i've got some work to do.

Yeah i had the same problem once i fitted mine, i just wound the boost up using my manual boost controller valve!!

on more thing, the injector warning light stays on when I first start the engine. It always goes out after about minutes driving. Before the chip it always went out almost immediately after starting. Is this normal?

yes, its down to the chip

You can do the overboost damage. In my coupe with Evo chip do the same. I use BoostValve at 1.4b and all ok


Regards