|
Forums48
Topics103,724
Posts1,170,155
Members1,666
| |
Most Online39,516 Apr 16th, 2026
|
|
|
Re: bailey dump valve
[Re: adam16vt]
#1012130
01/04/2010 17:30
01/04/2010 17:30
|
leon1
Unregistered
|
leon1
Unregistered
|
they are very loud too loud in my opinion but i had mine on a 20vt
|
|
|
Re: bailey dump valve
[Re: adam16vt]
#1012135
01/04/2010 17:39
01/04/2010 17:39
|
leon1
Unregistered
|
leon1
Unregistered
|
mine exits off the plastic pipe off the throttle body towards the front
|
|
|
Re: bailey dump valve
[Re: adam16vt]
#1012137
01/04/2010 17:41
01/04/2010 17:41
|
leon1
Unregistered
|
leon1
Unregistered
|
negative someone will be along very soon to tell you where it goes on a 16vt
|
|
|
Re: bailey dump valve
[Re: ]
#1012138
01/04/2010 17:43
01/04/2010 17:43
|
leon1
Unregistered
|
leon1
Unregistered
|
|
|
|
Re: bailey dump valve
[Re: adam16vt]
#1012148
01/04/2010 17:54
01/04/2010 17:54
|
spit
Unregistered
|
spit
Unregistered
|
there is only one as far as I am aware and it has to stay electrically connected
|
|
|
Re: bailey dump valve
[Re: ]
#1012149
01/04/2010 17:57
01/04/2010 17:57
|
zonta
Unregistered
|
zonta
Unregistered
|
your valve should be on the one going to the intercooler,and the one going to air filter should be blanked
16vt is the same set up as above
Last edited by zonta; 01/04/2010 18:00. Reason: 16vt is the same set up
|
|
|
Re: bailey dump valve
[Re: adam16vt]
#1012154
01/04/2010 18:03
01/04/2010 18:03
|
zonta
Unregistered
|
zonta
Unregistered
|
if the above has been done.have a look at the valve and check if it is open or closed when engine is running,
the vacum hose is connected aswel yes?
|
|
|
Re: bailey dump valve
[Re: ]
#1012159
01/04/2010 18:24
01/04/2010 18:24
|
leon1
Unregistered
|
leon1
Unregistered
|
also is the dump valve second hand?
|
|
|
Re: bailey dump valve
[Re: ]
#1012174
01/04/2010 18:47
01/04/2010 18:47
|
Eks
Unregistered
|
Eks
Unregistered
|
Mine was very quiet when I first connected it, but that was because it was horribly the wrong way round If it looks like the below - it's wrong! Sorry, don't have any pics of it correctly installed. EDIT: Not a baileys but still applicable.
Last edited by Eks; 01/04/2010 18:48.
|
|
|
Re: bailey dump valve
[Re: adam16vt]
#1012440
02/04/2010 08:56
02/04/2010 08:56
|
leon1
Unregistered
|
leon1
Unregistered
|
i think you need to bung that hole up and attatch it too a pipe going into your inlet manifold
|
|
|
Re: bailey dump valve
[Re: adam16vt]
#1012450
02/04/2010 09:35
02/04/2010 09:35
|
zonta
Unregistered
|
zonta
Unregistered
|
as i said before,goes on the pipe going to intercooler !! pic will give you an idea on where pipe leads from
Last edited by zonta; 02/04/2010 09:37. Reason: pic added
|
|
|
Re: bailey dump valve
[Re: adam16vt]
#1012462
02/04/2010 10:12
02/04/2010 10:12
|
zonta
Unregistered
|
zonta
Unregistered
|
|
|
|
|