Fiat Coupe Forum
- Funded by the Club for the benefit of all owners
- Please consider joining the Club to help keep the Forum running
- Or you can choose to make a Donation
Fiat Coupe Club UK
join the club
Fiat Coupe Forum
 
» Club Members only
    Workshop manual


» Announced
    Posting images


» Related sites
    Main club site
    fiatcoupe.net

 
Who's Online Now
1 registered members (Edinburgh), 399 guests, and 2 spiders.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums48
Topics103,776
Posts1,170,742
Members1,683
Most Online39,516
Apr 15th, 2026
Top Posters(All Time)
barnacle 33,794
stan 32,123
Theresa 23,350
PeteP 22,315
bockers 21,083
Edinburgh 19,117
JimO 17,919
Nigel 17,387
Previous Thread
Next Thread
Print Thread
Page 1 of 2 1 2
Highest power with internally-standard 16VT? #1031204
05/05/2010 09:39
05/05/2010 09:39

N
Noz
Unregistered
Noz
Unregistered
N



Hi,
I'm wondering what's the highest recorded power on a stock 16VT engine? MHG is allowed laugh

I'm looking to get big numbers as cheaply as possible (already been there with my 200SX: 383bhp @ hubs on a stock 1809cc with 2 x standard headgaskets) so I was thinking of applying the same methods: massive turbo, suitable injectors, massive intercooler, lots & lots of seat time for mapping. What are these engines like with lowered compression? Used to have a (relatively) high-powered Cossie, and that would barely run unless it was on boost rolleyes

Got big smiles already just with some late-night mapping on an otherwise completely standard £500 16VT. That, and binning the gay BOV has transformed it into a right little beast laugh

Re: Highest power with internally-standard 16VT? [Re: ] #1031209
05/05/2010 09:48
05/05/2010 09:48
Joined: Dec 2005
Posts: 6,572
Northampton England
Sedicivalvole Offline
Forum is my life
Sedicivalvole  Offline
Forum is my life

Joined: Dec 2005
Posts: 6,572
Northampton England
I am not sure, however I have no doubt that someone will be along to point you towards some figures.

You sound like you have previous experience of tuning. Keep in mind the age of the car and that it needs to be a healthy example etc etc.

Any reason for the 16 over the 20?


Vinci Grey LE
Alfa 147 GTA 3.2 V6
BMW E92 M3 4.0 V8
Fiat Tipo Sedicivalvole 2.0 16v ABS
Re: Highest power with internally-standard 16VT? [Re: Sedicivalvole] #1031307
05/05/2010 12:10
05/05/2010 12:10

N
Noz
Unregistered
Noz
Unregistered
N



Picked up the car as a runaround last year for a measly £500 with 5 months' MOT. Only just got round to working on it (knackered wishbone & droplink) and fancied playing around with the ECU so got stuck straight in winding up the boost, sorting out the fueling, ignition & also the poor cold-starting (just masking the real issue for the time being).

The engine itself isn't bad, a tad grumbly so it could do with an overhaul, but saying that my Nissan lump has 2mm crank float and should have died long before I strapped a T70 to it crazy

If it blows, it blows. I'll just break it & buy another.

Re: Highest power with internally-standard 16VT? [Re: ] #1031321
05/05/2010 12:22
05/05/2010 12:22

R
RICHB
Unregistered
RICHB
Unregistered
R



Let us know what you acheive before it goes bang.....another coupe destined for the scrap heap frown

Re: Highest power with internally-standard 16VT? [Re: ] #1031332
05/05/2010 12:31
05/05/2010 12:31
Joined: Nov 2007
Posts: 2,086
Pontypool
mr_tickle Offline
Club member 1455
mr_tickle  Offline
Club member 1455
Competition Level

Joined: Nov 2007
Posts: 2,086
Pontypool
Originally Posted by RICHB
Let us know what you acheive before it goes bang.....another coupe destined for the scrap heap frown


My guess would be an oil slick down the road longer than the one in the gulf laugh



[Linked Image]
Re: Highest power with internally-standard 16VT? [Re: ] #1031345
05/05/2010 12:58
05/05/2010 12:58

J
jtm
Unregistered
jtm
Unregistered
J



325hp / 1.4bar boost (standard injectors too ..)
3" exhaust, gt40 hybrid garrett, tubular manifold,
bigger intercooler.
have seen results around 340hp with flowed head, but standard cams. mine was total standard !
compression is already low 8.0 ..
if you want power with standard cams, you need adjustable pulleys..
standard exhaust cams is only 210 degree and 7.5mm lift.


Re: Highest power with internally-standard 16VT? [Re: ] #1031365
05/05/2010 13:30
05/05/2010 13:30

N
Noz
Unregistered
Noz
Unregistered
N



Originally Posted by RICHB
Let us know what you acheive before it goes bang.....another coupe destined for the scrap heap frown


I prefer to think of it as a Coupe that will allow others to live on long after it has left this mortal coil laugh

Originally Posted by mr_tickle

My guess would be an oil slick down the road longer than the one in the gulf laugh


Haha, I (sort of) know what I'm doing. Used to run my old skool Uno Turbo with lots of boost, and that never skipped a beat.

Originally Posted by jtm
325hp / 1.4bar boost (standard injectors too ..)
3" exhaust, gt40 hybrid garrett, tubular manifold,
bigger intercooler.
have seen results around 340hp with flowed head, but standard cams. mine was total standard !
compression is already low 8.0 ..
if you want power with standard cams, you need adjustable pulleys..
standard exhaust cams is only 210 degree and 7.5mm lift.



Thanks for that, good result you got there. 8.0:1 is pretty low for a production engine, plenty of room for lots of boost laugh

Re: Highest power with internally-standard 16VT? [Re: ] #1031550
05/05/2010 19:22
05/05/2010 19:22
Joined: Oct 2006
Posts: 1,829
kidderminster
nick_d Offline
My life on the forum
nick_d  Offline
My life on the forum

Joined: Oct 2006
Posts: 1,829
kidderminster
You'll have to change map sensor for big boost as standard won't run any more than 1.5 bar! I'm hoping to be running in excess of 350 within next few weeks.... I have cams and forged pistons tho so i don't count. :-D nick!



368bhp @ 1.5 bar
Re: Highest power with internally-standard 16VT? [Re: nick_d] #1031556
05/05/2010 19:37
05/05/2010 19:37

D
dink
Unregistered
dink
Unregistered
D



In France, we all run 300-350 bhp without problems on pretty much stock engines.

It's all in the mapping
Do it right and your engine is reliable, even with the increase in bhp
Do it wrong and you'll break the engine.

Anyways, don't focus too much on big bhp, unless you're a 0-60 motorway hero you'll find the the chassis being more important. chassis mods + try to strip weight: reduce unsprung mass: lighter wheels, light coilovers, lighter racing seats, lighter wheel hubs and lighter wishbones. Lighter battery (braille for instance). Get good tires and a proper alignment, All these mods will make the car handle better and allow you to go faster with the same bhp. Setup your car so it handles neutral, a tad of understeer on exit. Go to the race track with a driving instructor, learn the line, braking points, acceleratin points, trailing throttle, etc. You'll love it more than the extra bhp.

Justs my 2..

Re: Highest power with internally-standard 16VT? [Re: nick_d] #1031581
05/05/2010 20:34
05/05/2010 20:34

N
Noz
Unregistered
Noz
Unregistered
N



Originally Posted by nick_d
You'll have to change map sensor for big boost as standard won't run any more than 1.5 bar! I'm hoping to be running in excess of 350 within next few weeks.... I have cams and forged pistons tho so i don't count. :-D nick!


Yeah, that will be done relatively soon haha!

Originally Posted by dink
In France, we all run 300-350 bhp without problems on pretty much stock engines.

It's all in the mapping
Do it right and your engine is reliable, even with the increase in bhp
Do it wrong and you'll break the engine.

Anyways, don't focus too much on big bhp, unless you're a 0-60 motorway hero you'll find the the chassis being more important. chassis mods + try to strip weight: reduce unsprung mass: lighter wheels, light coilovers, lighter racing seats, lighter wheel hubs and lighter wishbones. Lighter battery (braille for instance). Get good tires and a proper alignment, All these mods will make the car handle better and allow you to go faster with the same bhp. Setup your car so it handles neutral, a tad of understeer on exit. Go to the race track with a driving instructor, learn the line, braking points, acceleratin points, trailing throttle, etc. You'll love it more than the extra bhp.

Justs my 2..


Thanks, your input is much appreciated. I'm only really interested in the BHP side of things, I just like to get silly figures from stock equipment, especially mappable ECUs. Big turbos & huge lag is the order of the day (Cossie afficionado).
I have a fully stripped-out 200SX (approx 1000kg) with 400bhp/ton to mess around with for track days & Santa Pod. As for the Fiat, I'm just playing around with a car I always liked but never got round to owning until late last year.

Just off to pick up a boost controller & boost gauge and check out the latest version of my map. Totally agree with you that it's all about the mapping laugh

Re: Highest power with internally-standard 16VT? [Re: ] #1031633
05/05/2010 22:21
05/05/2010 22:21
Joined: Dec 2005
Posts: 1,897
New Zealand
Saint Offline
My life on the forum
Saint  Offline
My life on the forum

Joined: Dec 2005
Posts: 1,897
New Zealand
Sounds like you have all the info you need but Ii'll add my bit

I run 320bhp/300ftlbs on standard internals for about a year with no problems.

however the 16vt engine is not a big revver compared to japanese stuff in OE guise, keeping the engines under 7000rpm seems to do alot for life as the rods are heavy and don't like big revs.

If you are thinking a GT3582R as a large turbo (and it has been done before) or similar then this leads to a very narrow power band and the "area under the curve" being very small, as the engine is not able to rev enough to get a resonablity wide one - well not high revs for any lenght of time. From memory spool was in the 4500-5000rpm range with the gt3582R (do a search for user "kenneth") which is fine if you can rev to 8500rpm like mitsi/nissan/honda but the coupe rods reportly wont handle it and may window the block - especially with the power of a GT3582R

Boost is limited as nick said to 1.5bar (2.5 absolute) on the OE map sensor but it can be swapped out for a 3bar cossie unit or a 4bar - but of course the resolution will be lower point to point so you need to be able to map it - or have it mapped

The other problem is that some of the aux's aren't really designed for huge BHP, the throttle body is 56mm (i guess your 200sx would be circa 70mm) and the inlet manifold is restrictive - it's all able to be swapped for other bits but you start to lose that "cheap" build you are looking for

keep us posted


Re: Highest power with internally-standard 16VT? [Re: Saint] #1031672
06/05/2010 00:06
06/05/2010 00:06

D
DidCoop
Unregistered
DidCoop
Unregistered
D



I run just shy of 250bhp with 285 ft lbs of torque. I'd like to crack 260bhp with 300 ft lbs and there I will stop as I'm more than happy with that power.

Each to their own though and good luck on your quest!

Re: Highest power with internally-standard 16VT? [Re: ] #1031682
06/05/2010 04:02
06/05/2010 04:02

J
jtm
Unregistered
jtm
Unregistered
J



for the TB size ;

oe 200sx s14 have 54mm and our 16vt fiats have 56mm

laugh

that is not the weakest link there, that size is good over 450hp easily. ( 430hp 200sx 54mm TB )
( well you may get more with bigger, but.. )

Re: Highest power with internally-standard 16VT? [Re: ] #1031683
06/05/2010 04:08
06/05/2010 04:08

J
jtm
Unregistered
jtm
Unregistered
J



many Small things make one big ..
like Dink said, mapping is one .
then good turbo for the power, that engine and cams can really make. ( dont get over 400hp flowing for standard cams )
good intake and exhaust manifolds
intake and exhaust manifold, connected to head ( dont know the english word. sorry )
no tight corners for the intercooler pipes..
( every 90 degree corner can take you 1% of power )
good FMIC..

etc
etc
etc..


Re: Highest power with internally-standard 16VT? [Re: ] #1031684
06/05/2010 04:09
06/05/2010 04:09
Joined: Feb 2006
Posts: 221
Czech republic
Honza Offline
Making a profit
Honza  Offline
Making a profit

Joined: Feb 2006
Posts: 221
Czech republic
http://www.youtube.com/watch?v=XMiVy5B_LW4

czech 2.0 16VT.. stock internals, 370 BHP


20 years with yellow 2.0 16v NA
22 years with black SEDICIVALVOLE

Re: Highest power with internally-standard 16VT? [Re: ] #1031686
06/05/2010 04:43
06/05/2010 04:43

J
jtm
Unregistered
jtm
Unregistered
J



NA intake cam was already at his first stage ..
300ps high boost version.

I dont believe you can get 365hp / 1.15bar boost on stock cams !

would be nice, but for these numbers there has to be
different cams, than standards

Re: Highest power with internally-standard 16VT? [Re: ] #1032212
06/05/2010 19:23
06/05/2010 19:23

N
Noz
Unregistered
Noz
Unregistered
N



Originally Posted by jtm
for the TB size ;

oe 200sx s14 have 54mm and our 16vt fiats have 56mm

laugh

that is not the weakest link there, that size is good over 450hp easily. ( 430hp 200sx 54mm TB )
( well you may get more with bigger, but.. )


50mm for the SR20DET as they're tapered inwards toward the inlet manifold thumb

56mm is plenty big enough on a 2.0L, great stuff. I'm kind of on a crash course with these engines having just been into Jap stuff for the last couple of years.

Re: Highest power with internally-standard 16VT? [Re: ] #1032222
06/05/2010 19:39
06/05/2010 19:39

P
patch234
Unregistered
patch234
Unregistered
P



As discussed in a previous thread - max power is easy, 4mm drilled hole in airbox - it's all you need. Expect massive power.

Re: Highest power with internally-standard 16VT? [Re: ] #1032259
06/05/2010 20:09
06/05/2010 20:09

N
Noz
Unregistered
Noz
Unregistered
N



Originally Posted by patch234
As discussed in a previous thread - max power is easy, 4mm drilled hole in airbox - it's all you need. Expect massive power.


Thanks for your input thumb

Re: Highest power with internally-standard 16VT? [Re: ] #1032306
06/05/2010 21:01
06/05/2010 21:01

N
Nievelc
Unregistered
Nievelc
Unregistered
N



Originally Posted by patch234
As discussed in a previous thread - max power is easy, 4mm drilled hole in airbox - it's all you need. Expect massive power.


Patch you need to quote specific power for this using the accurate model of racing alongside a similar car after this modification, I got 578BHP from this similar modification alone hehe

I hope I didnt upset anyone wink

Re: Highest power with internally-standard 16VT? [Re: ] #1032322
06/05/2010 21:21
06/05/2010 21:21

C
crgracing
Unregistered
crgracing
Unregistered
C



with standard internals??

Re: Highest power with internally-standard 16VT? [Re: ] #1033590
09/05/2010 18:59
09/05/2010 18:59

K
ktm450exc
Unregistered
ktm450exc
Unregistered
K



buy a 20vt instead and do the same type of thing i see them running well at less than 1k on fleabay...i paid 1400 for mine and its now 358 on standards and thats with a relatively small turbo (although id be scared to admit how much i had spent in case my wife reads it)you can pick up some real cheap bits if you look hard enough i have

Last edited by ktm450exc; 09/05/2010 19:05.
Re: Highest power with internally-standard 16VT? [Re: ] #1033716
10/05/2010 06:23
10/05/2010 06:23

J
jtm
Unregistered
jtm
Unregistered
J



hopefully I can get some good numbers too, just wait for a while..
with 16vt, and around 1000£ price for goodies, and with physically very small turbo and small wings
( under 50mm wings )

Re: Highest power with internally-standard 16VT? [Re: ] #1033842
10/05/2010 11:55
10/05/2010 11:55

J
Julien
Unregistered
Julien
Unregistered
J



I don't undesrtand how can you imagine a 56mm throttle body on a 2L turbocharged is enough...

At 7000rpm with 1.4bar, the air speed is more than 400km/h...

As already said before, in France we say that standard internals are good up to 340/350bhp with perfect mapping.

To run this kind of power, i think you should spend at least 2000£ to run something safe (turbo/injectors, exhaust, FMIC, Ignition cables, EGT, AFR, oil pressure/température, turbo).


Re: Highest power with internally-standard 16VT? [Re: ] #1033861
10/05/2010 12:22
10/05/2010 12:22

N
Noz
Unregistered
Noz
Unregistered
N



I'm not into spending more than I need to for power. I ran my standard CA18DET at 383bhp@hubs with standard internals, a power figure unheard of. The most expensive part on that will have been the NIStune ECU (~£170). Everything else was sourced second hand (carbon fibre wings, seats, Apexi GT exhaust from a breaker, 700bhp-capable Norris Designs FMIC £100 from Scotland etc etc)

I have all the gauges that I need already, I'm definitely not going to be spending anywhere near £2k on a £500 car shocked

The 56mm TB will be fine for power levels that won't be stressing the internals too much.

Fast
Reliable
Cheap

They say you can only have 2 out of 3, but I've never really believed that laugh

Re: Highest power with internally-standard 16VT? [Re: ] #1033863
10/05/2010 12:24
10/05/2010 12:24

N
Noz
Unregistered
Noz
Unregistered
N



Originally Posted by ktm450exc
buy a 20vt instead and do the same type of thing i see them running well at less than 1k on fleabay...i paid 1400 for mine and its now 358 on standards and thats with a relatively small turbo (although id be scared to admit how much i had spent in case my wife reads it)you can pick up some real cheap bits if you look hard enough i have


I've already got the 16VT though. Maybe I'll look at 20VTs once I've had my fun with this car smile

Re: Highest power with internally-standard 16VT? [Re: ] #1033867
10/05/2010 12:26
10/05/2010 12:26

D
DidCoop
Unregistered
DidCoop
Unregistered
D



Keep us posted NOZ as I'd LOVE to see how you're going to achieve 300+bhp for less than £2k. Tell us your secrets!

Re: Highest power with internally-standard 16VT? [Re: ] #1033883
10/05/2010 12:46
10/05/2010 12:46

A
alexjames
Unregistered
alexjames
Unregistered
A



Originally Posted by DidCoop
Keep us posted NOZ as I'd LOVE to see how you're going to achieve 300+bhp for less than £2k. Tell us your secrets!


Def keep us upto date!

Re: Highest power with internally-standard 16VT? [Re: ] #1033896
10/05/2010 12:59
10/05/2010 12:59

N
Noz
Unregistered
Noz
Unregistered
N



Originally Posted by DidCoop
Keep us posted NOZ as I'd LOVE to see how you're going to achieve 300+bhp for less than £2k. Tell us your secrets!


Haha, I won't know until I get there, if at all lol. Doing loads of reading up.

I was thinking:
Some kind of T3-type turbo, perhaps Schwitzer/BorgWarner S200. You'll be surprised what you can pick up silly cheap. I bought a Garrett GT4594 for £170 shipped from the States, back when the exchange rate was more favourable however). I've had brand new Garret T4s for £50-£100.

2nd hand exhaust system
FMIC of some sort, maybe from an EVO, Cosworth or large eBay type.
Plenty of custom piping, 3" and as short as possible.
Fuel pump, FPR, cold plugs.
Moates Ostrich (needed regardless for other cars).

I already have a Turbosmart eBoost, but also picked up a Dawes device & boost gauge the other day along with about £200's worth of 200SX parts for £20 (guy needs everything shifting, lots of parts were free).

I have an LM-1 for AFR logging, EGT, oil pressure, oil temp, water temp gauges already, and will also probably invest in a widget as & when.

I know you're supposed to uprate suspension, brakes etc, but I don't drive like a tool on the road and don't require the car for the track work.

I can keep costs down by doing the work myself. Really looking forward to tuning this engine, been a long time since I sold my Uno Turbo frown

Re: Highest power with internally-standard 16VT? [Re: ] #1033927
10/05/2010 13:47
10/05/2010 13:47

J
jtm
Unregistered
jtm
Unregistered
J



I havent seen any good power gains between standard 56mm TB and some +70mm versions..

if you show me, that with 350-400hp car I can get more, than 20hp just chancing the TB, I may chance it...

and for the £££££ spending..
laugh do we have to buy everything on the most expencive place ? laugh

I have turbo, that costs around 1300-1400£ in my country, but I bought it a little less ( 300£ was it .. )
and it it new!

so, ok.. if I would pay the total price for all my stuff .. hmmm around 4000£ soon spend laugh but the real is more like 1000 £

Page 1 of 2 1 2

Powered by UBB.threads™ PHP Forum Software 7.7.1
(Release build 20190129)
PHP: 7.4.33 Page Time: 0.017s Queries: 15 (0.011s) Memory: 0.7206 MB (Peak: 0.9564 MB) Data Comp: Off Server Time: 2026-11-19 14:18:49 UTC