Can a coupe mount these?

http://ricambi.alfisti.net/product_info....Spider-GTV.html

No.Fiat disks are 4 bolts and Alfa uses 5 bolts.You must change hubs in order to use this Alfa disks and calipers.

Yes you can but not easily - the discs will need re-drilling to 4x98

If it's a 16VT like mine it is more trouble still - you need a custom radial mount bracket.









They won't fit under OE wheels (must be 17" at least) and on some stylke they will hit the back of the spokes

So takes a bit of work but can be done, and I have also converted the rear to Pug 607 rotors (305mm)

Pos+

Stops like it has reached the end of a rope, no fade

neg-

Heavier unsprung weight (2.5kg more per corner approx), cost

If you want more details PM me as I don't come into this area often

Cheers

Just to Add Sparco was the first to do this conversion (on a 20vt) and there is a good somewhere which I basically copied. I'll try and find the thread

i'm very interested on this kit, i've seen it some times ago, and now convicted to purchase.

i'll buy only the callipers, the 4 hole (but i'm looking for 5 alfa hole center hub) and disc made by tarox, with disc separate inconel bell.

i bought the calipers from Alfa and bought the 330mm discs from 3G ....
As mentioned above the discs and calipers are a good bit heavier though`

i bought the calipers from Alfa and bought the 330mm discs from 3G ....
As mentioned above the discs and calipers are a good bit heavier though`

here to see the weight of kit:

callipers + pads + bracket


callipers + pads


callipers

Some problems with picture... i cannot open ...or maybe im blind .hmmm ;-)