Yes you can but not easily - the discs will need re-drilling to 4x98
If it's a 16VT like mine it is more trouble still - you need a custom radial mount bracket.
They won't fit under OE wheels (must be 17" at least) and on some stylke they will hit the back of the spokes
So takes a bit of work but can be done, and I have also converted the rear to Pug 607 rotors (305mm)
Pos+
Stops like it has reached the end of a rope, no fade
neg-
Heavier unsprung weight (2.5kg more per corner approx), cost
If you want more details PM me as I don't come into this area often
Cheers
Just to Add Sparco was the first to do this conversion (on a 20vt) and there is a good somewhere which I basically copied. I'll try and find the thread