Hey people, quick enquiry really, now im gonna be hopefully buying a HGT This Sunday and i were just wondering really if the brembo's go straight on the Hgt Hub?

Any Help would be great
Chris.

HGT should have the same hub as 16v(t) and 20v, 25mm wide; not the same as 20vt (the one with the 305x28 discs and Brembo callipers); there's some work to be done to get the Brembos up&running.

path 1
- adaptor plates (machined)

path 2
- 20vt hubs, steering rod end, maybe shafts(?)

once mounted, you'll have a good time trying to find decent alloys (other than stock 20vt 16" ones) that will clear the Brembos, without spacers and/or wobbly bolts.

I think there's greater benefit in fitting good discs(slotted?) and excellent pads (Pagid?) in stock HGT dimension (284mm), than changing the lot for Brembos...

I wanted to go down the same route with the brembo's but found it was going to be a real pain.

So instead I put drilled discs and reputable pads on and braided hoses and fully changed the brake fluid for dot5.1 and the difference was better by 10 fold.

So I would say just upgrade what you have not change them for the brembo's

Daz.

yeah thanks for the reply's
yeah i have decided to stick with 284MM brakes, vented & grooved brakes plus some good pads, what pads would you guys recommend ?

Yellow/Green stuff ?