is it possible to get a better induction sound by modifing the standard airbox at all?
i dont really want to go down the k&n route although it does have a k&n panel filter at the moment.

cheers guys,
ste

Have a look at how to guides, air box mod!

yeah i've seen the guide but it seems more performance related ,its that what got me thinking. it says about drilling holes in the side of the airbox but i dont know how big,many,whereabouts?

Where ever you like really, as long as it's the right side of the filter!

Drill. Test sound- drill test sound!

Try 5cm diameter at the side, top-back of the box. If you want more, proceed with adding one at the side, back-bottom. Add more if you want further to the front.

but only drill holes BEFORE the filter element!

ok guys,thanks for the input.definitely will drill them before the filter lol.
hopefully get round to it at the weekend.

cheers

Ive got lots of small holes on the underside of the airbox... and i mean lots, probably around 5mm in diameter then on the side of the airbox I have three larger holes. It sounds GREAT!

You could add a cone filter from Apexi or AEM.

On my old one I hollowed out the recesses on the side of the airbox rather than drill it; it looked as though it was made that way when I'd done.

pic?

thank you!

I'll take a look for some pictures; was a while ago though