Been working on the hubs and suspension today. Even if I'm a disc short :lol:
Fitted the 3L v6 hub with a newer wishbone, fitted brand new track rods and ends these are for a 20vt coupe from my 155 project. The abs wire was cut by the breaker so I'll splice it onto my existing sensor wire.
Fitted the coilovers from my 155 project. Need to get 155 top mounts as gtv ones are different. Also need coupe driveshafts, the donor had them but I had no means to get them off.
Old hub with tre, wishbone and driveshaft.
Brake installed with braided lines.
OK both sides are complete apart from driveshafts and top mounts
brakes in and bled.
Fitted my Sparco in with my new harnesses, will get a black sparco someday
Alfa badge installed into the wheel