hello there people ive been offered a nice set of wheels but there 108 pcd can any body tell me if i can get them to fit and what i would need ie wobbly bolts or hub metric conversion?

any info would be great

You'd need adapters (hubcentric spacers with offset bolt holes). They'd need to be at least 10-15 mm so there was enough meat for sufficient thread engagement. Wobble bolts won't work as you would need to take up 5mm a stud/bolt with them.

In a nutshell I wouldn't bother as it's a lot of hassle and I wouldn't be happy with such a powerful car on adapters. Are they off a Ford? If so you may strike lucky with the offset of the wheel and adapter to give you the correct scrub radius. But having said that you can pick up alloys that will fit for a couple of hundred quid.

clearence is fine they are a et20 wheres the coupe is 23 off the top of my head

et is 38to42 please read this
http://reviews.ebay.co.uk/FITMENT-GUIDE-...000000001720675

as far as i remember the offset for the 20vt (brembo) is around the 23 mark the N/A is 38/42

i might be wrong but its no way 23 think it might be 30to38 because of the brembo,s

never seen a pcd mentioned anywhere for the coop thats been less than 30, generally what I've seen is 30 - 45 as recommended.

Don't suppose its stamped inside an original alloy? really intrigued by this now.

Paul

IIRC the 20vt wheels are et38 and Plus wheels are et40

il have to double check now

i didnt think the offsets where any different between the plus and normal