i am refurnishing all the suspension on my coupe Koni adjustable shocks eibach springs,eibach front and rear anti roll bars powerflex drop link bushes kyb rear shocks refurbished rear radius arms polybush rear beam stich welded front subframe ,front upper and lower strut braces and powerflex front wishbone bushes i just want to make shore that the fitting of the front bushes are the same as this link link
and if anybody has any tips for the changes that i am doing

thanks for looking

I am sure when I got my front lower arms from TI , that barbz drilled and tapped a bolt into the shaft that holds the bush and fitted a washer on the front bush to stop it coming off.
sorry if I have not explained that well..

G

Don't grease between the wishbone pin and metal sleeve of the bush - it's only my opinion.....better still you may use some kind of metal glue.....