Guys, I have been looking for a while into these cams and I am at this stage not sure whether I can get hold of brand new OEM FIAT parts. However, there's a chance you can get these cams as replacement parts from AJUSA (I haven't checked with them personally).

Part number for Tipo cam from AJUSA is 93077900.

Part number for Coupe 16VT cam from AJUSA is 93044300 and CAMPRO is CP16468.

Plus if someone's quick there's Tipo inlet cam by AJUSA for sale on ebay.de - 390521951060

I might be able to help anyone looking to buy these as it seems they're available in Poland (at least from what it says on the www - still awaiting reply from retailers).

Cheers,
Jack

Certainly would be good if you're able to get hold of these. Take it from me, the Tipo/16VT cam combination is a great road setup if you can get them at the right price. These are the cams the 16VT SHOULD have come with from the factory!

KJ try with AJUSA direct as you might be able to get them at trade prices. Otherwise I am waiting for confirmation from retailers. PS I think that FIAT OEM cam for Tipo will be about £300...

You can get regrinds to your own spec for around 300.....

yes and you can get a smaller base circle diameter which can be unshimmable!

True, but there's not much to grind on these cams, so there's not much that can be done with them - especially the exhaust cam.

They lay on new material, i can get regrinds in whatever lift i want, they usually use 10,2mm lift for the integrale, they can then regrind to whatever spec. This is on original springs, wich has coilbind on 11,5mm.
They want 260 pounds plus vat for theese...