Highest power and boost

Fiat Coupe Club UK

Fiat Coupe Forum

» Club Members only
Workshop manual

» Announced
Posting images

» Related sites
Main club site
fiatcoupe.net

Top Posters(All Time)

barnacle 33,794

stan 32,123

Theresa 23,349

PeteP 22,314

bockers 21,083

JimO 17,919

Nigel 17,387

Print Thread

Highest power and boost #1481512 30/03/2014 19:44 30/03/2014 19:44
Joined: Feb 2007 Posts: 3,486 London Tan technics OP I need some sleep
technics OP I need some sleep Joined: Feb 2007 Posts: 3,486 London Tan	For a T25 housing? Are these limited in anyway? Why/whats the difference with T3 an d T4 etc.... Now in the 400+ bhp club!

Re: Highest power and boost [Re: technics] #1481627 31/03/2014 16:54 31/03/2014 16:54
Joined: Dec 2005 Posts: 5,405 Castle Combe Flea Forum is my life
Flea Forum is my life Joined: Dec 2005 Posts: 5,405 Castle Combe	A T3 and T4 housing are in turn bigger flanges (apertures). So yes they have potential to flow more, but this is also limited by the A/R of the housing, and also the outlet size as well as the turbine size/design. A T25 with the correct set-up can achieve 500-600bhp.

Re: Highest power and boost [Re: technics] #1481641 31/03/2014 18:05 31/03/2014 18:05
Joined: Feb 2008 Posts: 1,728 London kj16v My life on the forum
kj16v My life on the forum Joined: Feb 2008 Posts: 1,728 London	As above, T25 and T3 flanges don't have a major influence on performance up to 500-odd bhp. However, a very big non-performance related minus against T25 flange manifolds is that they limit you to very small number of turbochargers. The most turbochagers by far have T3 flanges.

Re: Highest power and boost [Re: technics] #1481661 31/03/2014 20:09 31/03/2014 20:09
J johnnybravoturbo Unregistered
johnnybravoturbo Unregistered J	For internal wastegate t25 is fine,with external wastegate bigger turbos you need the t3 or you'll struggle upto and over 500 bhp.