Some helpful child at my work, fiddled with my EBC settings and I cannot remember what the were.
I had a little play last night but the gain in % being the means in which boost is calculated has me a bit miffed, What have other peoplegot as there settings?
Spec, standard apart from dumpvalve, induction kit and flea map.
thanks all
Re: Greddy Profec B II Settings
[Re: tonyd20vt]
#1531844 28/03/201511:0328/03/201511:03
You should be able to down load the manual online if you haven't still got it. The % miffed me when I was setting mine up il have a look next time I'm up at the unit if you have t sorted it by then
LE53 (452BHp & 389ftlb's with Quaife) Wine red VIS FOOFY Audi RS4 B7
Re: Greddy Profec B II Settings
[Re: tonyd20vt]
#1531874 28/03/201515:0128/03/201515:01
Ive got the manual in PDF file. Had the laptop in my car last night at 11:30pm with me. I've got the low boost perfect with 10% gain boosting at 1.0psi with the starting boost at 0.65.
I want the high to boost at 1.2 max with the gain at 20% and starting boost at 0.85. Keep getting spikes to 1.45psi
I have no idea what I should be setting the limiter % up as, as it only goes to 20% when you can set gain upto 35%. I've got it and 15% at the moment.
Re: Greddy Profec B II Settings
[Re: tonyd20vt]
#1531887 28/03/201517:1928/03/201517:19
Did it not spike before? because from what I've seen before most will over boost for a second then settle down anyway especially on the smaller frame turbos that spool up quickly
But I maybe wrong
Last edited by knight7660; 28/03/201517:21.
LE53 (452BHp & 389ftlb's with Quaife) Wine red VIS FOOFY Audi RS4 B7