Fiat Coupe Forum
- Founded by Kayjey & James Northam
- Funded by the Club for the benefit of all owners
Fiat Coupe Club UK
join the club
Fiat Coupe Forum
 
» Announced
    Posting images


» Related sites
    Main club site
    fiatcoupe.net


» External data
    owners listed
 
Who's Online Now
3 registered members (386ka, Woka, 1 invisible), 309 guests, and 3 spiders.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums69
Topics113,543
Posts1,340,419
Members1,785
Most Online731
Jan 14th, 2020
Top Posters(All Time)
barnacle 33,520
stan 32,122
Theresa 23,294
PeteP 21,480
bockers 21,070
JimO 17,917
Nigel 17,366
Edinburgh 16,659
RSS Feeds
Club Events
Club Information
Track Events
Rolling Road/RWYB
Social Events
Non-UK Events
Coupé Related Chat
Coupé Spotting
Coupé News/Press
Buying/Selling Advice
Insuring a Coupé
Basic FAQ's
How to Guides
Forum Issues
Technical Problems
General Maintenance
Styling
Tuning
Handling
ICE and Alarm
Coupés for Sale
Coupés Wanted
Parts for Sale
Parts Wanted
Group Buys
Business Forum
Other Vehicles for Sale/Wanted
Other Items for Sale/Wanted
Haggling/Offers
Ebay links
Other Cars
Other Websites
General Chat
Previous Thread
Next Thread
Print Thread
Resurrection - 61,000m Broomy 20vt #1607076
01/09/2017 07:44
01/09/2017 07:44
Joined: Mar 2007
Posts: 16,659
Auld Reekie
Edinburgh Offline OP
Club President, member225
Edinburgh  Offline OP
Club President, member225
Forum veteran

Joined: Mar 2007
Posts: 16,659
Auld Reekie
This is the one

After 18 months lying in the previous owner's driveway, notwithstanding a tow down to FCSS and back for inspection/intended repair, an apparently "famous fiat four" (thanks HiraethHuw bowtie ) based up here in Edinburgh have taken on not a little challenge considering three of us have little/no experience of such a project - bar reading of others' fascinating restoration threads smile

Timescale - open.

Plan - first wash and brush thoroughly, cleaning out engine bay, getting some polymer at least on paintwork and popping on a cover to protect her from the winter, seagull poo and u/v light.

Followed by:

Brake overhaul
Engine and gearbox out and overhaul
Corrosion treatment
Suspension
and a host of tidying/replacing and electrical work including repair to rodent-chewed loom!

Pics

click to enlarge click to enlarge click to enlarge click to enlarge

Replacing the bonnet en route
click to enlarge

New home ready for weather protection and imminent car cover
click to enlarge click to enlarge

The gentle breeze during transit will have helped to disturb some of the leaves etc in the engine bay but a serious hoover and wash will be next on the agenda before the project starts in earnest.

For my own part it's taken me a while to come around to the whole idea but now it's an exciting reality and there's a mountain of stuff to learn! It has to be said that PJM was sorry to see her go after spotting it 18 months ago, having laid under a tree for 13 years, (the coop, not him laugh ) but at least he can be content that it's destined for the revival he once planned smile



BumbleBee carer smile
Re: Resurrection - 61,000m Broomy 20vt [Re: Edinburgh] #1607119
01/09/2017 14:18
01/09/2017 14:18
Joined: May 2012
Posts: 1,920
Going North on the A9
dante giacosa Offline
My life on the forum
dante giacosa  Offline
My life on the forum

Joined: May 2012
Posts: 1,920
Going North on the A9
Workday No.1- Monday 4th September

watch this space...

Re: Resurrection - 61,000m Broomy 20vt [Re: Edinburgh] #1607223
03/09/2017 09:54
03/09/2017 09:54
Joined: Mar 2007
Posts: 16,659
Auld Reekie
Edinburgh Offline OP
Club President, member225
Edinburgh  Offline OP
Club President, member225
Forum veteran

Joined: Mar 2007
Posts: 16,659
Auld Reekie
How it emerged from its 13-year hibernation (march 16)

From under a tree.. click to enlarge

down the road click to enlarge

arriving at click to enlarge

twilight hose, brush and clean click to enlarge

that's better... click to enlarge

bootwell... click to enlarge

...contrasting with engine bay click to enlarge

wheelarch inner seams click to enlarge


18 months later in new surroundings click to enlarge


BumbleBee carer smile
Re: Resurrection - 61,000m Broomy 20vt [Re: Edinburgh] #1607712
11/09/2017 22:22
11/09/2017 22:22
Joined: Mar 2007
Posts: 16,659
Auld Reekie
Edinburgh Offline OP
Club President, member225
Edinburgh  Offline OP
Club President, member225
Forum veteran

Joined: Mar 2007
Posts: 16,659
Auld Reekie
Although evenings are darkening and the Broomy is at least 20 mins away for most of us work, in fits and starts, has begun. A file is born.. click to enlarge

It lives outside under a cover and the bonnet is left loose off its hinges for easier access. Up to now has been mainly cleaning engine bay and removing each wheel, squirting penetrant fluid at every visible nut and bolt in readiness for removing callipers and wheelarch liners. 14 years' worth of leaves and debris is slowly being extracted from each newly-revealed orifice.

The battery tray has been removed and is being cleaned up
click to enlarge click to enlarge click to enlarge click to enlarge

The front bumper was next
click to enlarge click to enlarge

Lots of items shot with rust but bodywork still surprisingly sound.

Rad off next....


BumbleBee carer smile
Re: Resurrection - 61,000m Broomy 20vt: Discussion [Re: Edinburgh] #1607766
12/09/2017 20:49
12/09/2017 20:49
Joined: Mar 2007
Posts: 16,659
Auld Reekie
Edinburgh Offline OP
Club President, member225
Edinburgh  Offline OP
Club President, member225
Forum veteran

Joined: Mar 2007
Posts: 16,659
Auld Reekie
Today was Radiator day....first the a/c
click to enlarge

then the rad itself -
click to enlarge click to enlarge

and down below it
click to enlarge
Can save the fans with luck...


That was enough!


BumbleBee carer smile
Re: Resurrection - 61,000m Broomy 20vt: Discussion [Re: Edinburgh] #1608794
01/10/2017 20:03
01/10/2017 20:03
Joined: Mar 2007
Posts: 16,659
Auld Reekie
Edinburgh Offline OP
Club President, member225
Edinburgh  Offline OP
Club President, member225
Forum veteran

Joined: Mar 2007
Posts: 16,659
Auld Reekie
Update:

Dismantling has now ceased so that bodywork tlc can be accessed and carried out.

All boot carpets removed and brushed clean.
Boot lid lining removed and mildew cleaned off.
Passenger seat removed along with rears, aired, mildew removed and upholstery cleaned.
click to enlarge

Undertray click to enlarge

Boot rear trim click to enlarge


And now the important stuff for 'stopping' duties
Before
click to enlarge
After
click to enlarge

Both callipers (o/s with seized bleed nipple and h/brake cable end)
click to enlarge

Cylinders in not bad nick
click to enlarge

But seals leaving much to be desired
click to enlarge
not to worry.. click to enlarge


Brembo starters, cleaned with brake fluid
click to enlarge

And finally after much help from click to enlarge

the POR15 finally gets under way smile
click to enlarge click to enlarge

Immediate challenge is to try and "ease out" the seized bleed nipple as well as removing the fused h/brake cable end from the flange at the back of the o/s calliper - the side that tends to attract the worst wear and corrosion.

Next stop front brakes....

Re: Resurrection - 61,000m Broomy 20vt [Re: Edinburgh] #1623430
29/07/2018 23:09
29/07/2018 23:09
Joined: Mar 2007
Posts: 16,659
Auld Reekie
Edinburgh Offline OP
Club President, member225
Edinburgh  Offline OP
Club President, member225
Forum veteran

Joined: Mar 2007
Posts: 16,659
Auld Reekie
Well not quite....

Vultures re-gathering click to enlarge


...after a very lengthy gap in attention to this for all sorts of reasons the last 2 or 3 weeks has thankfully seen a renaissance of attention, mainly thanks to dante's sterling work cleaning up the rear callipers and associated parts, eventually fitting new seal kits so that they work perfectly smile

They've still to be refitted though as trailing-arm brakelines need replacing.

This evening was fun! First, off with the rear bumper click to enlarge


complete with undertray only delayed by one central recalcitrant 10mm hex bolt holding the tray on which had to be sawn off as the head corners were rounded click to enlarge

A good opportunity to brush out years of crud therefore, and it all cleaned up really nicely.

Then for the fuel tank.....having soaked relevant fixings in penetrant fluid over several days most of this went quite smoothly but there were a couple of surprises removing it though - a) the brake lines attached to the front end of it (near the centre of the car) with a sort of figure-of-eight clip, and b) the fuel line/hose also at the front, driver's side, which is routed over the anti-roll bar click to enlarge

It had more fuel in it than we all thought but since it's been lying there for 15 years unused it has to come out...and grotty it was too click to enlarge

At least now the compensator valve and neighbouring bits and pieces can be more easily evaluated Compensator valveclick to enlarge

Pics to follow. added


BumbleBee carer smile
Re: Resurrection - 61,000m Broomy 20vt [Re: Edinburgh] #1623908
13/08/2018 07:52
13/08/2018 07:52
Joined: May 2012
Posts: 1,920
Going North on the A9
dante giacosa Offline
My life on the forum
dante giacosa  Offline
My life on the forum

Joined: May 2012
Posts: 1,920
Going North on the A9
quite a successful few weeks on the beast- in a concerted attempt to finish at the rear of the car, in order to get the back-wheels back on, and be back on the ground.

All underbody prep & treatment and undersealing done, from the subframe crossmember back. Greatly helped of course by the removal of the fuel tank to drain 'whatever' was in it, after nearly a decade of sitting still.

This Saturday saw the refitting of the overhauled rear callipers, and refurbed cable & pipe brackerty.
We have the rear compensator off and have sourced another and are currently waiting for brake lines, which are being fabricated for us.

fuel tank straps were ground-back & painted and this week we anticipate refitted the NS rear arch liner.

Once we get the rear-compensator & brake lines back- we'll fit those, then the fuel tank, then the handbrake cables, then the OS rear arch.
And then the wheels go back on- and we are done at the rear.

click to enlarge click to enlarge click to enlarge click to enlarge

Re: Resurrection - 61,000m Broomy 20vt [Re: Edinburgh] #1623964
14/08/2018 07:15
14/08/2018 07:15
Joined: May 2012
Posts: 1,920
Going North on the A9
dante giacosa Offline
My life on the forum
dante giacosa  Offline
My life on the forum

Joined: May 2012
Posts: 1,920
Going North on the A9
We finally sorted my little foxes-paw on the rear brake shoes fitting last night-

and got the NS arch liner back into position also

waiting on brake lines now...

click to enlarge

Last edited by dante giacosa; 14/08/2018 07:15.
Re: Resurrection - 61,000m Broomy 20vt [Re: Edinburgh] #1624822
09/09/2018 07:55
09/09/2018 07:55
Joined: May 2012
Posts: 1,920
Going North on the A9
dante giacosa Offline
My life on the forum
dante giacosa  Offline
My life on the forum

Joined: May 2012
Posts: 1,920
Going North on the A9
New Rear-brake compensator fitted now to rear crossmember and new copper lines run from it.

Two: forwards to the junction point with the lines that run the length of the car.

And the two; that go either side to the tops of the trailing arms.

Pending final fit- we'll have to whip 'em off for a quick paint up- can anybody recommend something we could spray 'em with..?

Apologies; technology prevents me from attaching any images at this point.

Re: Resurrection - 61,000m Broomy 20vt [Re: Edinburgh] #1625777
07/10/2018 13:32
07/10/2018 13:32
Joined: Mar 2007
Posts: 16,659
Auld Reekie
Edinburgh Offline OP
Club President, member225
Edinburgh  Offline OP
Club President, member225
Forum veteran

Joined: Mar 2007
Posts: 16,659
Auld Reekie
How time flies....the logistics of co-ordinating four people, all with different talents, around work, families, weather - make this maybe more protracted than would be desirable for some, but then it's a commonality and an opportunity to learn about the coupe all in good company smile

It's now had a pretty thorough valet inside, removing historic dust, dirt and cobwebs, the intention being to throw in a bag of silica gel over the winter. All the cloth seating has now been extracted and cleaned up - it's in terrific condition.

Rear brake progress:

Callipers refitted after cleaning out and new seal kits
click to enlarge

The new copper brakelines - passenger footwell to rear
click to enlarge

Fitment to new rear compensator
click to enlarge

Brake lines wrapped in self-amalganating tape
click to enlarge

Perforation in boot/rear panel join, initial clean and prep, repair with Steel-Stik
click to enlarge click to enlarge click to enlarge

Arch area and underneath undersealed
click to enlarge click to enlarge

The heat shield had come off one of its bolts - this obstinate latter eventually succumbed to the knockometer after abortive attempts to drill it out from inside the boot.

Refitting the fuel tank
click to enlarge

The handbrake cables are ready for action but seems we should have the hydraulic system up-and-running first. Won't be long till the rear bumper, left removeable for easier access underneath, is refitted permanently!

One of the many items on the front to-do list
click to enlarge

The n/s wishbone mount is badly corroded - high also in priority.

Meanwhile the imminent front brake dismantling is being prepared by numerous attacks from penetrant spray - the onset of GMT is likely to mean a significant reduction in quality time in this open-air environment frown


BumbleBee carer smile
Re: Resurrection - 61,000m Broomy 20vt [Re: Edinburgh] #1626418
28/10/2018 07:28
28/10/2018 07:28
Joined: Mar 2007
Posts: 16,659
Auld Reekie
Edinburgh Offline OP
Club President, member225
Edinburgh  Offline OP
Club President, member225
Forum veteran

Joined: Mar 2007
Posts: 16,659
Auld Reekie
With rear bakes now reassembled and fuel tank back on, time to tidy up the back end and prepare for 180 degree turnaround smile
The bumper polystyrene becomes loose when the fixing holes enlarge so three of the four allen bolts were given larger washers to secure it. click to enlarge click to enlarge
The gaffer tape over the n/s reflector is only temporary!


The turnaround would allow work on the front end to take place with a slightly improved shelter factor along with the tarp being rotated 90 degrees
Pre-tow click to enlarge

Installing driver's seat
click to enlarge

Out she comes click to enlarge click to enlarge click to enlarge

In she comes, chocks as brakes click to enlarge

In position and tarp at work click to enlarge click to enlarge


BumbleBee carer smile
Re: Resurrection - 61,000m Broomy 20vt [Re: Edinburgh] #1626568
30/10/2018 22:04
30/10/2018 22:04
Joined: Mar 2007
Posts: 16,659
Auld Reekie
Edinburgh Offline OP
Club President, member225
Edinburgh  Offline OP
Club President, member225
Forum veteran

Joined: Mar 2007
Posts: 16,659
Auld Reekie
The n/s wishbone needed replacing, the rear mounting collar reduced to a few scraps of rusty metal. Preparation for this began with droplink removal
Ball joint prised but rubber boot seal damaged click to enlarge

Droplink bolt sheared click to enlarge

click to enlarge click to enlarge

Mostly removed apart from collar remaining fused on to antiroll bar
click to enlarge

Sheared stuff click to enlarge

TRE removal
click to enlarge

Pinchbolt removal
click to enlarge

Getting clearerclick to enlarge

Collar "removed", not without resistance
click to enlarge

What awaits us now...


BumbleBee carer smile
Re: Resurrection - 61,000m Broomy 20vt [Re: Edinburgh] #1627116
20/11/2018 12:26
20/11/2018 12:26
Joined: May 2012
Posts: 1,920
Going North on the A9
dante giacosa Offline
My life on the forum
dante giacosa  Offline
My life on the forum

Joined: May 2012
Posts: 1,920
Going North on the A9
Phew-

well; that was a bit of a mission; but thanks to the extreme generosity of GrahamL and his tooling; we were able to get the NS wishbone off.

An initial issue was that the rear-most inboard clamp for the legacy wishbone mostly stayed in position; after the arm itself was removed! But one of us (who drives a yellow car) was able to whip-it-out with his patented virtuoso crow-bar technique.
(it's all in the wrists, apparently)
Once removed, an unhealthy residual rust pile remained in the place of each clamp. Once cleaned away; this revealed a still sound subframe.
Could do with a paint though.

Needless to say; it was a bit 'difficult' to get the lineup for the new subframe-to-wishbone bolts. I found myself wishing I could swear in Italian; so the car would be under no illusions how I felt.

New bolts fitted all round- detail is of ball-joint swivel pic-bolt & nut.

Final torquing and anti-toll bar drop-link tightness yet to be achieved.

click to enlarge click to enlarge click to enlarge click to enlarge

click to enlarge click to enlarge click to enlarge

Re: Resurrection - 61,000m Broomy 20vt [Re: Edinburgh] #1627676
07/12/2018 10:43
07/12/2018 10:43
Joined: May 2012
Posts: 1,920
Going North on the A9
dante giacosa Offline
My life on the forum
dante giacosa  Offline
My life on the forum

Joined: May 2012
Posts: 1,920
Going North on the A9
Well, last night was quite productive- but before we get to that; some footage from recent off-site / workshop efforts on the front calipers.

Thanks to the miracles of our local FIAT/Alfa specialist (/magicians); McLennan's in Loanhead; they were able to free the seized input-unions on the rear of each caliper, and undo the slide-shim bolts.

(we already had the pistons & all the seals removed)

So we then laid into removing any alloy-corrosion from under the shim positions, cleaning & flattening the shims themselves and cleaning out the piston bores & dust seal seats (recess-rings).
Plus we cleaned out the slide-shims' mounting holes with an M6 tap.

Then one of the refurb kits was used to reassemble the NS caliper with new pressure & dust deals, and the slide-shims were re-attached with new M6 bolts and some Loctite.

click to enlarge click to enlarge click to enlarge click to enlarge

click to enlarge click to enlarge click to enlarge click to enlarge

Re: Resurrection - 61,000m Broomy 20vt [Re: dante giacosa] #1627677
07/12/2018 11:26
07/12/2018 11:26
Joined: May 2012
Posts: 1,920
Going North on the A9
dante giacosa Offline
My life on the forum
dante giacosa  Offline
My life on the forum

Joined: May 2012
Posts: 1,920
Going North on the A9
so, last night was mostly 'remedial work' with regard to brake lines,

We have had remade the front NS line, and the two lines which drop under the NS floorwell; to join the two going to the rear of the car (compensator valve).

As it happens; thanks to the miracles of the AC pipework; we are unable to remove the OS front brake line; leaving it the sole remaining original line on the car.

It was a not inconsiderable fool-around, to route the two rear-bound lines down the firewall/bulkhead and out under the NS arch. At the bottom, these lines pass, just out of sight, behind the inner arch lip and turn under the car. There is a plastic bracket with holds them in parallel behind the inner arch lip, and this was refitted.

The NS front brake line was a walk-in-the-park by comparison, but advice would be gratefully received on the collective wisdom of whether this line is supposed to pass through this somewhat oversized plastic clip, as shown in the attached image, on it's way down to the wheel arch.
Our new NS line is the vertical object on the right of the picture; wrapped in self amalgamating tape. please see attached first image
We could not tell, by looking at the other (complete) cars present whether this was appropriate.

Further to that; the recently refurbed NS front caliper was temporarily held on the hub, with a couple of screwdrivers, whilst we bent-up a toy-piece of brake line to act as a template for the remanufacture of new ones.
The NS front brake-flexible was attached also.

At the same time as having a key role in all these tasks; he-who-drives-a-yellow-car-with-a-black-roof, also refitted both new track-rod-ends..

click to enlarge click to enlarge click to enlarge

click to enlarge click to enlarge click to enlarge

Re: Resurrection - 61,000m Broomy 20vt [Re: Edinburgh] #1633370
14/06/2019 14:19
14/06/2019 14:19
Joined: Mar 2007
Posts: 16,659
Auld Reekie
Edinburgh Offline OP
Club President, member225
Edinburgh  Offline OP
Club President, member225
Forum veteran

Joined: Mar 2007
Posts: 16,659
Auld Reekie
Well, after a delay of some months, not helped by moving-house, family commitments, private-vendettas, alien-invasion, brexit and suchlike, work finally resumed work on the Project-Car last Tuesday.
The primary objective has always been to restore braking-functionality in some form, and we are tangibly close.
Handbrake cables were replaced (not without issue) last year, and the rear callipers refurbed & new pads fitted. All (bar one) brake lines were remade also, but outstanding work remained on the front callipers, which have recently been completed. (delay caused by myself)

Tuesday afternoon saw something of a Coupe-fest, in that as an entré, we investigated the appearance of a hitherto unknown sprint-blue VT which has appeared locally, and also attempted a bodyshop-quote for one of our number, who's Portofino car has suffered a misfortune.

First task on the car, was to install the NS front calliper back on the hub, and to join it to the incoming brake flexible with the remade S-hardline. New securing-clips were hammered onto the flexible line mounting points on the hub and inner wing, and we then discovered we had the wrong brake pads and so couldn't fit them.

click to enlarge

Thanks to the generosity of others, we have assimilated (as they say in Star Trek) a couple of sets of brand-new & boxed Coupe front brake-pads; all of which are incorrect.
Furthermore we discovered we've lost the calliper spring-&-two-pins that each side uses to secure the pads.

click to enlarge

Undeterred by these trifling details, we refitted the road wheel and lowered the NS side of the car to the ground for the first time in 'some' months. Much creaking ensued as the replaced NS lower wishbone and anti-roll bar drop-link started to earn their money. The door functionality certainly felt better for the presence of ground under the wheels.

click to enlarge

Working on the OS front, a repeat prescription was in order, but with the addition of the painting Hammerite onto the incoming brake hardline, from the engine bay, as it is the sole remaining original line. Interestingly, during an attempt to replace this line last autumn, it was observed that passing along the rear of the engine bay (as it does) it must have been fitted, BEFORE any of the A/C or clutch pipework was added during production. This line really is pinned to the firewall.
A recent conversation with a specialist revealed that it is effectively 'never' replaced.

click to enlarge click to enlarge
The OS road wheel was added and the car lowered to sit on all four wheels.

The car was then engaged in reverse gear, which without the presence of the clutch slave cylinder, is something which nods to race-car credentials, as you just have to go straight-in! Then the NS side was jacked 'high', and axle-stands were added front & back.
The final remaining brake hardlines running from the front to the rear of the car were added in.

click to enlarge
A complication for the removal or refitting of these lines is where they pass over the exhaust before the rear brake-compensator. Some exhaust 'slack' can be gained by removal of the two M8 13mm hex bolts which secure the combination handbrake reaction-point & mid-box hanger to the underside. 'One' then has to pull the exhaust down onto one's chest to gain space above it, to thread the lines across.

click to enlarge
This task has been hanging over us (literally) for some months and so it was good to finally confront it.
Although significant effort was made to pattern-match our re-made front-to-rear lines from the originals, and great care was made with documentation, in the final throes, it seemed more ambiguous than I had hoped for in the match-up with the lines from the rear brake compensator.
Legacy documentation will confirm whether we got it right.

click to enlarge
At this point we discovered we are also missing a final female-to-female M10 brake line coupler for the join between the front to rear lines and the feeding pair from the engine bay. (which takes place behind the front subframe, under the passenger footwell)
This single item will complete hydraulic tightness of the system.

click to enlarge
A follow up trip is to ensue shortly to fit this coupler, front brake pads, and pad-retaining calliper springs & pins for each side.

In the meantime; the car sits on all four wheels, and we all slept a good sleep on Tuesday night.

click to enlarge
The immediate future holds the clutch slave-cylinder, replacement of lost gearbox-oil, and the manual rotation of the engine crank.


(Text courtesy of dante giacosa)


BumbleBee carer smile
Re: Resurrection - 61,000m Broomy 20vt [Re: Edinburgh] #1642251
29/06/2020 17:19
29/06/2020 17:19
Joined: Mar 2007
Posts: 16,659
Auld Reekie
Edinburgh Offline OP
Club President, member225
Edinburgh  Offline OP
Club President, member225
Forum veteran

Joined: Mar 2007
Posts: 16,659
Auld Reekie
One year later and even more excuses into the bargain, follows more progress on our ever-so-patient steed.

18th June 2019 efforts...

Another massively successful night at the coal-face.

-female-to-female brake-line coupler fitted under NS footwell; completing front-to-rear brakelines & hydraulic tightness on the car
-front calliper (pad) retaining springs & pins temporarily fitted to Brembos
-re-furbed hub /strut wiring-brackets re-fitted for ABS sensor and brake-pad wear sensor wiring (wiring fitted) on both NS & OS

The correct front brake-pads, can be fitted with ease, once they arrive. A small tap-hammer and 'drift of some kind will be required to knock the spring-retaining pins through the Brembos (from the inside out) to secure everything.

Interesting to note, that last night during preliminary wheel-torquing on the OS road wheel (with the car still jacked); that we were able to effectively reverse-crank the engine through the gearbox.
We should attempt to do this deliberately, (as the car has not turned over in some time), to ensure fluidly of cylinders & valve gear. The risk of valve damage at slow speed (in the event of a belt failure) is nil. It's surprising however that is was possible with such 'ease'- perhaps the moment created by the roadwheel acting to extend cranking power from the relatively small breaker bar had an effect.
It would be easier, and more mechanically sympathetic however, with the spark plugs removed, as we would not be fighting cylinder-compression; and we should consider this as an actual task shortly.

We are rapidly approaching decision-time, with regard to the elephant-in-the-room; and although a fleeting return trip may be possible in the next few days to add the brake-pads, and remove the spark-plugs.

(Text courtesy of dante giacosa)




Attached Files
Brembo refurb kit.jpeg (400 downloads)
Mounting bracket1.jpeg (393 downloads)
Mounting bracket3.jpeg (390 downloads)
Brakeline unions.jpeg (400 downloads)
Tool storage.jpeg (404 downloads)
Last edited by Edinburgh; 29/06/2020 17:51.

BumbleBee carer smile
Re: Resurrection - 61,000m Broomy 20vt [Re: Edinburgh] #1642253
29/06/2020 17:42
29/06/2020 17:42
Joined: Mar 2007
Posts: 16,659
Auld Reekie
Edinburgh Offline OP
Club President, member225
Edinburgh  Offline OP
Club President, member225
Forum veteran

Joined: Mar 2007
Posts: 16,659
Auld Reekie
26th Feb 2020


* radiator support bar chopped through at both ends
* failed attempt made to free off OS front disc
* donor Portofino car jacked to axle stands, to allow front discs & pads to be removed
* failed attempt to remove calliper & disc on Portofino car OS
* project-car boot 'payload' significantly reduced down
* outer aux-belt pulley tightened on engine; although tensioner needs reset on legacy belt
* engine turned 1 revolution over from 19mm socket on crank pulley (still free moving 😂)


The remains of the radiator support bar need drilled out- see attached images.

First-wave corrosion treatment (wire-brush fun), could be started under the front cross beam and in the rear three quarter panels. Although we will need 10+ degrees to apply the treatments; the grinding itself can still occur.

Need to investigate what it will take to remove the oil cooler pipes, to allow the alternator to be removed. (on both cars) It was noticed last night that the inner aux-belt has 'gone', and as such this will make replacement slightly easier.

Sump & gearbox drain points need to receive regular penetrant spray from now on, on every visit.

Remove spark plugs (penetrant stage first?) to allow free rotation of engine



(Text courtesy of dante giacosa)


Attached Files

BumbleBee carer smile
Re: Resurrection - 61,000m Broomy 20vt [Re: Edinburgh] #1642257
29/06/2020 18:05
29/06/2020 18:05
Joined: Mar 2007
Posts: 16,659
Auld Reekie
Edinburgh Offline OP
Club President, member225
Edinburgh  Offline OP
Club President, member225
Forum veteran

Joined: Mar 2007
Posts: 16,659
Auld Reekie
11th March 2020

A rather last minute, and somewhat miserable night, in 2.5 degree conditions, lead to the following results.

* centre console backlight lamps replaced
* refurbished centre console refitted, and screwed into position
* rear three-quarter panel floors given 3rd wave grind-over & hoover out
* rear three-quarter panels floors given 1st stage POR 15 degreasant process
* hole in OS rear footwell ground back from above & below and given 1st stage POR 15 degreasant process
* three crusty-bits under the NS seat squab position, ground back and given 1st stage POR 15 degreasant process


During the OS rear footwell work, a degree of emerging corrosion was evident at the sill under the driver's door. It is also evident under the car. A cursory wave-over with a wire-bush revealed it to be slightly more extensive & progressed, than other spots of localised corrosion, and it is likely this spot will need welded. We should consider the removal of the interior carpet to aid this process...?
A weld-through electroplating primer-spray is available for just such spots, and we should attempt to find some.

A fan-speed controller knob is required. (one has been found).

Visibility was had, of the mid-undertray on the OS, which conceals the fuel-filter. Pic attached. Food for thought.

Water was seen to be dripping-in, from the OS Pininfarina badge mounting pins. The Electrolube non-silicone sealant will arrive on Friday.

(Text courtesy of dante giacosa)

Attached Files
Hole, o:s:r footwell.jpeg (406 downloads)
Pinin badge pins.jpeg (390 downloads)

BumbleBee carer smile
Re: Resurrection - 61,000m Broomy 20vt [Re: Edinburgh] #1642270
30/06/2020 07:18
30/06/2020 07:18
Joined: Mar 2007
Posts: 16,659
Auld Reekie
Edinburgh Offline OP
Club President, member225
Edinburgh  Offline OP
Club President, member225
Forum veteran

Joined: Mar 2007
Posts: 16,659
Auld Reekie
15th March 2020

A massively productive weekend, thanks to efforts of the weekend-team™, principal achievements include;

* contingency wiper-motor & mechanism, in storage up at car
* scuttle panel area given 1st wave clean out
* Pininfarina badges' mounting pins sealed for a 2nd time
* interior carpet removed & driver’s seat re-instated
* clutch slave cylinder refitted and joined to hydraulic system
* brake line to master cylinder reconnected
* U-pol weld-through primer applied to hole in OS rear floor, above and below
* 1st-wave POR 15 top coat, applied to rear three-quarter floors, 3x floorpan spots @ rear seat squab & on spot under OS rear
* brake system reservoir filled with fluid; but system not bled yet
* cabin-ventilation can-knob fitted!

(Text courtesy of dante giacosa)

Attached Files
n:s:r inner sill POR.jpeg (347 downloads)
o:s:r inner sill POR.jpeg (353 downloads)
Floor outside POR.jpeg (357 downloads)
Centre console refit.jpeg (363 downloads)
Floor inside POR.jpeg (351 downloads)

BumbleBee carer smile
Re: Resurrection - 61,000m Broomy 20vt [Re: Edinburgh] #1642365
04/07/2020 11:42
04/07/2020 11:42
Joined: Mar 2007
Posts: 16,659
Auld Reekie
Edinburgh Offline OP
Club President, member225
Edinburgh  Offline OP
Club President, member225
Forum veteran

Joined: Mar 2007
Posts: 16,659
Auld Reekie
16th March 2020


* removal of No.1 spark plug, revealing copious oil deposits; probably from a legacy spilt-pour above filling-hole on engine top
* checking of dipstick to reveal crankcase is overfilled by about a litre- if the car has turned over like this; (and we know it has) the catalyst is likely shot
* 2nd wave grind-down of underbonnet sides and front crossmember
* TOTAL miracle, as Paul-the-arms managed to get the legacy Brembo callipers & discs from the Portofino car
* front callipers removed from Project-car
* spark plugs ordered
* brake bleeding proving totally unsuccessful

It is often the case on a newly prepared engine, or an engine of significant legacy, which has not turned over for a time, to use an intermediary oil-change to flush out gnarly deposits. After this; new 'working' oil is used to actually run the motor.
Two things have become obvious today; the oil is totally BLACK, and there is WAY too much of it.
Further to the prep we have done on the sump-plug; we drain this dreadful stuff from the car, and replace it with some total-nonsense from Tesco, This will do as out flush oil- it is possible there is some additive we can introduce at this point also.

The question remains as to whether it is worth swapping the oil filter at this point too? I think I would have to say 'yes'; it will certainly be harbouring significant filth, and is readily accessible at the moment; visible to the left of the turbo-charger. It is possible we need a strap for removal of the oil filter. It is probably worth degreasing what is visible of the oil-filter which will aid the strap-type removal tool (if we go for that kind; there are two pages of oil-filter removal tools on Machine Mart!).

The 2nd wave grind-down went quite well tonight; but there's a lot of ground-bond cabling in the way, at these two point on either side of the engine bay.

It would certainly be a good idea for electrical-continuity, to clean these cable-ring-crimps up anyway; and if the bolts can be undone, and the cabling lifted up, then more efficient work can be made of paint-prepping the engine bay.
It would also be terrific if the plastic wiring-harness cover-tube could be opened and removed from the OS, also - see attached image, circled in orange; this is also in the way of reaching some of the under bonnet rust.

The 10mm nyloc nuts securing the grey front polystyrene bumper-filler underneath were washed with penetrant, and wire ground clean tonight also, allowing access to the front of the front cross beam, and also some more of the extended slam-panel metalwork.


(Text courtesy of dante giacosa)

Attached Files
Dipstick sludge.jpeg (358 downloads)
Loom plastic cover.jpeg (358 downloads)
Slam panel mount.jpeg (352 downloads)

BumbleBee carer smile
Re: Resurrection - 61,000m Broomy 20vt [Re: Edinburgh] #1642369
04/07/2020 15:59
04/07/2020 15:59
Joined: Mar 2007
Posts: 16,659
Auld Reekie
Edinburgh Offline OP
Club President, member225
Edinburgh  Offline OP
Club President, member225
Forum veteran

Joined: Mar 2007
Posts: 16,659
Auld Reekie
17th March 2020

* the front bumper-filler (polystyrene) which covered the cross-beam has been removed
* the engine-bay front earthing-points have been undone, although the NS bolt has sheared in position
* the OS engine bay wiring-harness tube has been removed
* third wave grind down of engine bay, and extended NS chassis leg above gearbox
* POR 15 degreasant-stage carried out over all of engine bay and radiator-support bar mounts
* 5x 13mm hex-head bolts for slam-panel, were persuaded to undo; the top ones completely out

Next..

As the front-end corrosion-treatment work widens; we find ourselves looking at the front bumper supports (Eiffel towers). Cursory inspection reveals a significant 'game' being played on the OS, which we do not have complete access to.
Removal of the slam-panel would in turn remove the air-duct cowls for the intercooler and oil-cooler, and grant us pornographic access to the lower OS.
Prep has already been done on the bolts & nuts holding the horn-mounting-bracket, and it would make sense to undo this also.
Power steering reservoir bent out of the way tonight to reach the two 13mm bolts for the OS slam-panel mount. see attached image; bolts circled in red.

(Text courtesy of dante giacosa)

Attached Files
Slam panel mount o:s.jpeg (331 downloads)
Slam panel mount n:s.jpeg (332 downloads)

BumbleBee carer smile
Re: Resurrection - 61,000m Broomy 20vt [Re: Edinburgh] #1642374
04/07/2020 20:05
04/07/2020 20:05
Joined: Mar 2007
Posts: 16,659
Auld Reekie
Edinburgh Offline OP
Club President, member225
Edinburgh  Offline OP
Club President, member225
Forum veteran

Joined: Mar 2007
Posts: 16,659
Auld Reekie
18th March 2020

* massive scuttle-panel rewash & clearout
* rusty-spots in scuttle area identified and ground-back and given POR 15 degresant stage
* replacement pollen filter sourced for car (from d.g.'s bedside table 🤔)
* slam-panel successfully removed and compared to replacement item on potential donor Portofino-car
* further grind-down of exposed metalwork at front-bumper-supports (eiffel towers) and front crossbeam
* re-wash over the entire front end with degreasant stage
* removal of 3x 13mm hex-head bolts & 1 pozidrive screw, to lower mid-OS-undertray to expose fuel filter- see attached image
* sump-plug successfully undone using patented Edinburgh/dante giacosa three-hand technique
* gearbox sump-plug successfully undone, as above
* Wynn's engine-flush identified in Halford's, but rejected due to methodology required engine to be at running temperature
* correct DVLA logbook has arrived in the post for the car!

Notes

It appears the fuel-filter is a push-fit connector of somekind- see attached images, plus fuel-system schematic for orientation.
Three reasonably significant rust-blisters are apparent under the vehicle on the rear NS, which could be an MOT snag; it's likely two of them are the underside of the spots attended to under the rear seat-squab at the weekend. see attached images.
An oil-filter removal-tool was bought today; @ £7.99
As much prep work has been done, as can be, on the front end of the car; today hopefully the Marchmont-contingent can effect the metal-etch-primer stage in sunlight, before the Morningside-backshift arrive to attempt painting. If possible; we should be able to get in a 2nd coat of the rear-threequarter panels also.
It seems set to be a good painting day tomorrow weatherwise....

Attached Files
Slam panel removed.jpeg (337 downloads)
Underfloor corrosion.jpeg (341 downloads)

BumbleBee carer smile
Re: Resurrection - 61,000m Broomy 20vt [Re: Edinburgh] #1649754
30/03/2021 22:49
30/03/2021 22:49
Joined: Mar 2007
Posts: 16,659
Auld Reekie
Edinburgh Offline OP
Club President, member225
Edinburgh  Offline OP
Club President, member225
Forum veteran

Joined: Mar 2007
Posts: 16,659
Auld Reekie
It's now a year on, and just before Christmas our project was nursed though its MOT. Brakes, clutch master and slave, donor injectors, full belts, replacement airbag ecu, gear linkage fix all contributed. On the bling side, leather seats cleaned and fed, roof lining brushed down, centre and handbrake consoles stripped and polished.

But bad news today after a few runs here and there to dry out the cat and renew the engine's knowledge of itself - rough running after warming up caused a visit to our friendly Alfa specialist who found "cylinder 5" (they had marked them 1,2,3,4,5 so probably the 4th from the left) was low on compression - 75 frown

We came to the conclusion the reason it had been abandoned under a bush for 13 years after doing 60k was that it had been ragged, doing heaven knows what damage.

After doing a leak test and discounting exhaust valve and cylinder head the best guess is knackered piston rings which is major stuff none of us have an idea about tackling, let alone want to fund right now.

So it's driveable enough to take it back to where it's resided these past 3 and 1/2 years and will need to hibernate until further work can be done frown


BumbleBee carer smile
Re: Resurrection - 61,000m Broomy 20vt [Re: Edinburgh] #1662107
25/11/2022 18:30
25/11/2022 18:30
Joined: Mar 2007
Posts: 16,659
Auld Reekie
Edinburgh Offline OP
Club President, member225
Edinburgh  Offline OP
Club President, member225
Forum veteran

Joined: Mar 2007
Posts: 16,659
Auld Reekie
Another eighteen months have passed and now that our project has been mercifully transferred to a lockup belonging to a friend of one of us amidst a tiny country hamlet, the opportunity to keep it dry and away from the elements has renewed enthusiasm, but more importantly the occasional Friday morning availability of yet another mate, a mobile mechanic, "G", has supplied us with the skills needed and the essential safety of moving the engine.

With the fortune of the only half-sunny morning in ages we turned up today hoping to get closer to our goal of diagnosing the cause of the half-power cylinder. Previous visits had gone a fair way with gradual dissembly, with parts bagged and marked; the head bolts had been loosened a quarter-turn too but the presence of G's ingenuity and 3-ton jack - he has owned a 16v coupé even shocked - made short work of disconnecting everything else appropriate, and within 90 minutes off came the head smile

Of the three likely suspect problems, viz.

1. Leaky valve
2. Piston ring failure
3. Head gasket failure

no 3 was the least likely, it being a rare occurrence in coupés, and on removing the head it was immediately apparent from the dark patches around cylinder 5 that we were getting closer.

Filling pot 5 in the head with WD40, it almost immediately started to leak down and exit through the exhaust side. It was exciting and a great relief to think that the poor performance mystery over the years was hopefully now solved, the dismantling and proper view of the area revealing what is basically a straightforward mechanical fault.

G is taking away the head to attend to this along with general tlc, skimming etc. and new parts - head gasket set (including manifold gaskets and valve stem oil seals) and 12 "stretch" head bolts - being ordered.

We're now over 5 years into this project, surviving all sorts of setbacks - and then covid - but there is a glint in our eyes...

Attached Files
5 pots post-removal.jpg (116 downloads)
Pots 3,4+5.jpg (117 downloads)

BumbleBee carer smile
Re: Resurrection - 61,000m Broomy 20vt [Re: Edinburgh] #1665331
18/05/2023 20:57
18/05/2023 20:57
Joined: Mar 2007
Posts: 16,659
Auld Reekie
Edinburgh Offline OP
Club President, member225
Edinburgh  Offline OP
Club President, member225
Forum veteran

Joined: Mar 2007
Posts: 16,659
Auld Reekie
And it's May 2023 already!

During the winter the issue of the leaky valve was investigated and our mate-mobile-mechanic effected the cure by regrinding the culprit. Difficulties of access (40 minutes' drive away from two of us), constant hours at work and long cold winter nights have really hampered progress, as usual.

But after having the cylinder head skimmed, the block was cleaned up of its legacy gasket detritus and the piston bowls de-carboned. Additionally the water-pump was refitted, and it was heartening to see that it was metal-bladed rather than plastic.

Monday 15th turned out to be (here the text is provided by another team member renowned for his treatise on the joys of travelling up the A9 in a VIS laugh )

"a comedy of errors on Day1 of the rebuild. Despite a probable combined ownership experience of 50 years between us, we totally failed to recognise several key snags which stood in the way of significant progress.
If circumstances tell us anything at this point; if and when completion is realised, we’ll be lucky if any of us actually has the intellect to be able to drive the thing!"

And..

"So, upon arrival, our hire-in professional mechanic set about examining the newly cleaned block top surface for cleanliness ahead of gasket fitting. The gasket is of multi layer variety, fastened together at the edges to maintain 'one-ness'.
A pair of old cylinder head bolts which had been chopped to act as guide-pins for head refitting, were employed to be manually threaded in & out of each tapped hole, to ensure there would be no issues, as the holes had filled with cast-off coolant and oil from the head removal last year. This completed, the two gasket-line-up collars were manually pressed into the block top surface, and the gasket laid in position.

On the cylinder head itself, attempts were made to remove the final three exhaust-manifold studs, which were still in position from the refurbishment work. Only one could be persuaded and this compromised the threads upon removal. Some new manifold studs will need to be sourced- and the exact number required is yet to be established.
The water pump was found and steps taken with a flat-bladed screwdriver to remove the residual gasket material from it's last application.
A new gasket bead was applied and the water pump bolted into position.
It was interesting to note that the minimum-skim casting-mark on the head underside surface was still easily visible following the recent refurbishment work undertaken.

The cylinder head was lifted into position and offered at a slight angle to home the remaining exhaust manifold studs through the manifold. Phone photography from the rear of the crankcase, either side of the oil-separator above the anti-knock sensors, established head-to-block fastness relative to the locating line-up collars.
At this point it was realised that the new cylinder head bolts did not include new washers, and that it was only by coincidence that we still had most of the originals bar three to hand. One was in a toolkit, and unfortunately the outstanding two were in a scrap metalwork recycling pile in a workshop at some distance from the worksite.
Various attempts were made to source contingency washers locally, but to no avail.

The proceedings were brought to a halt, as it was deemed unwise to set belt timing with only a partially secured cylinder head.
At this point it was realised we had also overlooked fitting the new exhaust gasket before mating the head to the block; meaning the head will have to come off again anyway, as the gasket cannot be fitted across the ports with the two remaining manifold studs in position.
Also, it was then realised that the cylinder head front coolant gallery rail had also not been fitted ahead of mating the head to block. It appears impossible to affix it after the head is on, and the exhaust manifold already fitted, and so a second reason to remove the head presents itself..."

In the mean time the front coolant gallery was removed so that the seized centre drain point could be extracted




Attached Files
Block cleaned.jpg (47 downloads)
CH valve side.jpg (45 downloads)
Water pump.jpg (45 downloads)

BumbleBee carer smile
Re: Resurrection - 61,000m Broomy 20vt [Re: Edinburgh] #1665332
18/05/2023 21:36
18/05/2023 21:36
Joined: Mar 2007
Posts: 16,659
Auld Reekie
Edinburgh Offline OP
Club President, member225
Edinburgh  Offline OP
Club President, member225
Forum veteran

Joined: Mar 2007
Posts: 16,659
Auld Reekie
Three days later...

The coolant rail had presented its own problem, the 5mm hex-socket drain plug having seized. No amount of penetrant soaking over many hours made it any more likely to budge and the socket was very close to stripping. Resorting to filing two straight sides on the plug to fit a 12mm thin spanner, a friendly "beast-from-the-past" was called in to assist; it didn't take long, the soft-leverage being so much less destructive than "con belto" laugh

Other items to consider in the rebuild at this stage were the removal of stubborn manifold studs in the cylinder head, expertly fielded using the "two-lock-nuts" method by our pro; the securing of the water pump; and out of more interest than anything else, the observation of the cast-mark on the head to indicate the limit of skimming it could take.

Attached Files
Removing plug.jpeg (44 downloads)
Plug filed 12mm.jpeg (44 downloads)
Water pump sealant.JPG (44 downloads)

BumbleBee carer smile

Powered by UBB.threads™ PHP Forum Software 7.7.1
(Release build 20190129)
PHP: 7.3.33 Page Time: 0.026s Queries: 24 (0.015s) Memory: 1.0170 MB (Peak: 1.4537 MB) Data Comp: Off Server Time: 2024-03-28 11:56:58 UTC