This has to be great news for Coupe lovers - 21 body parts across the Coupe and Barchetta. I hope it includes outer sills! https://www.pistonheads.com/news/ph-eurocars/stellantis-extends-range-of-heritage-parts/44202

Not much listed for Coupes so far, but it's a start:

Front bumper 735266210 £163.80 '99 1.8 and 2.0 16v
or 735273010 £546.00 '99 Turbo Plus with side skirts
or 735273012 £546.00 '99 1.8 and 2.0 16v with skirts

Engine ECU Hitachi 46764928 for 1.8 16v £327.60

Complete left door 16v up to 1996 46316228 £546.00
Complete right door 16v up to 1996 46316227 £546.00

Maybe I'll try contacting FCA Heritage Centre (they let me have a self guided tour after the Turin 25th Anniversary trip) and suggest a few parts, other suggestions welcome!

How about these (some of which are still fairly readily available)

Outer sills (complete, or separate repair sections)
Front wings
Front bumper lips
Side skirts
Rear reflectors
Front lower section of rear wings
Rear light cups
Front suspension towers
Rear suspension bump stop cups
Floor repair sections including boot
Radiator support panel
Eiffel tower repair sections front & rear
Slam panel (complete, or repair sections)
Bonnet?

Abs sensors for all models, remanufactured thermostats for 16v's?

Interesting DaveG I posted up earlier on FB this good new and was suggesting maybe we could start a list.

So far the list of available heritage parts seems to be limited to bumpers, wings, doors, bonnets, tailgates...and ECUs (strange choice?)

ECU only for the VIS, too... probably because it's used in a lot more vehicles and the coupe version will just be a different software blown in.

It'd be nice to see new lights, though... or even just light covers.

Neil

I haven't been under my Coupe yet to compare but are the front bumper supports from an Alfa 145/145/155/156 close to coupe ones? Available from Totally Alfa here.

Dave - I'm a bit confused with the doors 'up to 1996". Thought the doors would be the same throughout the production period or have I read it wrongly

The 16v doors are not directly interchangeable with the 20v doors IIRC.

16v door had a nice little feature that being the courtesy light on the bottom

Apart from the puddle light (and upper rear light, replaced with a reflective sticker) the inside door panels are different, so that various fixing points are different. But in desperation, I'm sure a 16v/16vt door could be made to fit a 20v/20vt...