Just got this fitted last night, it took a while to get is squeezed in the gap behind the radiator and i had to bend a few pipes out of the way but it eventually squeezed in.

Next problem was adapting the downpipe as the new unit didnt come with a flange.
Then I had to call Samco as they dont stock a hose large enough for the inlet but we got one sorted in the end.
Anyway, its all sorted now and apart from the extra lag this thing makes the car sound like a fccuking jet engine <img src="/forum/images/graemlins/smirk.gif" alt="" />

Here's a picture of it as we unwrapped it before fitting
Clicky

Off to the rolling road next if i can get the bonnet shut <img src="/forum/images/graemlins/wink.gif" alt="" />

jimbo , "you took my breath away" with that post <img src="/forum/images/graemlins/laugh.gif" alt="" /> <img src="/forum/images/graemlins/crazy.gif" alt="" /> G. i will get my coat <img src="/forum/images/graemlins/grin.gif" alt="" />

don't forget the aquamist & a blitz.......

you'll need it ! <img src="/forum/images/graemlins/cool.gif" alt="" />

PS : that geeza may want to make a sharp exit, before he gets properly compressed like an action man thing ! <img src="/forum/images/graemlins/shocked.gif" alt="" />

That geeza is me Taz <img src="/forum/images/graemlins/smile.gif" alt="" />

where did you get the actuator from!?? <img src="/forum/images/graemlins/confused.gif" alt="" /> and dont tell me that you are still using the std internals!! <img src="/forum/images/graemlins/shocked.gif" alt="" />

i have heard also that this tuby is capable for 1000+ <img src="/forum/images/graemlins/cool.gif" alt="" /> <img src="/forum/images/graemlins/laugh.gif" alt="" /> <img src="/forum/images/graemlins/laugh.gif" alt="" />

What kind of options did you get with the turbo? Clipping/Porting?

How much boost you running with that <img src="/forum/images/graemlins/laugh.gif" alt="" />

oh dear,.. I don't stand a chance as Silverstone <img src="/forum/images/graemlins/frown.gif" alt="" />

joe

where did you get the adaptor plate ?

did Kingpleb get it for ya ?

did you use the stock downpipe or went 3 inch ?

we need info !

.

I hope you have an uprated FMIC also, cause the heat generated by that will be somewhat more than the standard unit...Oh and a walbro would also be good in your situation <img src="/forum/images/graemlins/smile.gif" alt="" />

not sure why that would give you lag <img src="/forum/images/graemlins/smile.gif" alt="" /> Once it's going, it's going. It aint gonna stall (unless you get a flock of Taz's favourite seagulls in it)

ok ok I know i didn`t rely to your pm about what turbo I was thinking of now .....but i`d have thought you would have known,that is far to small,for any real power gains.may give you a sore head tho`...ask Hammy <img src="/forum/images/graemlins/smile.gif" alt="" />