As above; quick quesion,
just woundering if anyone has a link where to purchase one with an adapter for my sip <img src="/forum/images/graemlins/confused.gif" alt="" />

Pinin was selling these a while back, so might be worth checking with him <img src="/forum/images/graemlins/wink.gif" alt="" />. Mine fits to my SIP using a piece of 80mm diameter hose (the adaptor comes witht he filter and is actually 76mm, but the 80mm hose can be tightened up to fit no problem).

Phil

Here:

Apexi

I orderd from him on Thursday for 56.98 GBP incl.delivery and adapter and i will probably receive it on Monday here in Greece.Tracking number can also be provided.
<img src="/forum/images/graemlins/wink.gif" alt="" />

wow thats cheap

Yeap!!!And with DHL express service but as i see now he has raised the shipping cost.I paid 21.99GBP for shipping to Greece.

Benny can you please tell me how long your SIP is?I need the dimension to make one myself.

Yeah 5400RPM is your best bet. I've stopped selling them now, I kept getting hit for VAT and wasn't making anything. <img src="/forum/images/graemlins/frown.gif" alt="" />

Sorry to pikey the thread here slightly, but do these go straight onto a none SIP, i.e if you don't have a FMIC too!? If so, what size pipe is that?! Cheers, Mark

mark, you can fit the Apexi cone filter instead of the OEM air-box and you will need 130deg silicon elbow as per This & this

However, from my own experience and many mates here, this mode is not recommended as you will loose the low-down torque and you will have extreme sucking noise only.
I swap it to back to the OEM Air box after 1 day from using it! <img src="/forum/images/graemlins/shocked.gif" alt="" />